#include "stdafx.h" #include "TDbColumn.h" //////////////////////////////////////////////////////////////////////////// // ver: 0-TArch8 const Adesk::UInt8 TDbCrossStair::g_nVersion = 0; ACRX_DXF_DEFINE_MEMBERS(ATSCrossStair, ATSPolyPathEnt, AcDb::kDHL_CURRENT, AcDb::kMReleaseCurrent, 1, ATS_CROSSSTAIR, "ATS_CROSSSTAIR图形无法解析, 请下载上华软件|网址: www.shanghuasoft.com"); IMPLEMENT_TENTBASE(TDbCrossStair); TDbCrossStair::TDbCrossStair() { m_nStepHeight=_AS_SYS_UNIT(220.0); //踏步高 m_nStepWidth=_AS_SYS_UNIT(300); //踏步宽 m_nStairWidth=_AS_SYS_UNIT(1200); //梯段段宽 m_nSlabSize=_AS_SYS_UNIT(1200); //休息平台左上尺寸 m_nSlabSizeUR=_AS_SYS_UNIT(1200); //休息平台右上尺寸 m_nSlabSizeLR=_AS_SYS_UNIT(1200); //休息平台右下尺寸 m_nRotation=0.0; //旋转角度 m_nStepNum=1; //梯段步数 m_nSpaceWidth=_AS_SYS_UNIT(3600.0); //楼梯间尺寸 m_nRailHeight=_AS_SYS_UNIT(900); m_nStairFlag=1; //楼层标记 m_nStartSide=OFFSET_LEFT; //左边起步 m_nSideFlag=0; // m_nRailWidth=_AS_SYS_UNIT(60.0); //扶手宽度 m_nRailDist=m_nStepWidth*0.5; //层与层连接处扶手伸出距离 m_dSectRotation=PI/6.0; //剖断线旋转角度 m_nFlagEx=0; m_nBeamHeight=_AS_SYS_UNIT(200); //边梁高，坡道专用 m_nBeamThick=_AS_SYS_UNIT(120); //边梁厚度 m_nSlabThick=_AS_SYS_UNIT(120); //板厚或梁厚 m_nViewCtrl=0; //自动确定 m_nFlagEx |= SFEX_SECTPOS; m_dTextHeight=3.5; } TDbCrossStair::~TDbCrossStair() { } BOOL TDbCrossStair::IsValid() const { BOOL bRet=TDbEntity::IsValid(); if(!bRet) return bRet; bRet=(m_nStepHeight>_DIST_SNAP && //踏步高 m_nStepWidth>_DIST_SNAP && //踏步宽 m_nStairWidth>_DIST_SNAP && //梯段段宽 m_dTextHeight>0&& //字高 m_nStepNum>1 && //梯段步数 m_nSpaceWidth-2*m_nStairWidth>-_DIST_SNAP && //楼梯间尺寸 m_nRailHeight>_DIST_SNAP && //扶手高 m_nRailWidth>_DIST_SNAP && //扶手宽 GreatEqual(m_nRailDistToSide,-(m_nSpaceWidth*0.5-m_nStairWidth)) && //扶手距边 GreatEqual(m_nBeamHeight, 0.0) &&//边梁高 GreatEqual(m_nBeamThick, 0.0) &&//边梁厚 GreatEqual(m_nSlabThick, 0.0) &&//休息台厚 m_nStairWidth>m_nRailWidth+m_nRailDistToSide); //扶手高度 return bRet; } // 提供对格式刷的支持 void TDbCrossStair::CopyPropertiesFrom(AcDbEntity *pSrcEntity, unsigned gMatchFlag) { assertWriteEnabled(); TDbPolyPathEnt::CopyPropertiesFrom(pSrcEntity, gMatchFlag); TDbCrossStair *pSrc=TDbCrossStair::cast(pSrcEntity); if(pSrc) { m_nStepHeight=pSrc->m_nStepHeight; m_nStepWidth=pSrc->m_nStepWidth; m_nStairWidth=pSrc->m_nStairWidth; m_nSlabSize=pSrc->m_nSlabSize; m_nSlabSizeUR=pSrc->m_nSlabSizeUR; m_nSlabSizeLR=pSrc->m_nSlabSizeLR; m_nStepNum=pSrc->m_nStepNum; m_nSpaceWidth=pSrc->m_nSpaceWidth; m_dTextHeight=pSrc->m_dTextHeight; m_nRailHeight=pSrc->m_nRailHeight; m_nRailWidth=pSrc->m_nRailWidth; m_nRailDistToSide=pSrc->m_nRailDistToSide; m_nStairFlag=pSrc->m_nStairFlag; m_nStartSide=pSrc->m_nStartSide; m_nSideFlag=pSrc->m_nSideFlag; m_nRailDist=pSrc->m_nRailDist; m_dSectRotation=pSrc->m_dSectRotation; m_nSectStepNum=pSrc->m_nSectStepNum; m_nFlagEx=pSrc->m_nFlagEx; m_nBeamHeight=pSrc->m_nBeamHeight; //边梁高，坡道专用 m_nBeamThick=pSrc->m_nBeamThick; //边梁厚度 m_nSlabThick=pSrc->m_nSlabThick; //板厚或梁厚 //add by xlc on 090426箭头文字 SetTextUp(pSrc->GetTextUp()); SetTextDown(pSrc->GetTextDown()); if(database()==NULL|| pSrcEntity->database()==NULL|| database()==pSrcEntity->database()) { m_idLayerHand3d=pSrc->m_idLayerHand3d; m_idLayerStep3d=pSrc->m_idLayerStep3d; m_idLayerBeam3d=pSrc->m_idLayerBeam3d; m_idLayerRail3d=pSrc->m_idLayerRail3d; m_idLayerArrow=pSrc->m_idLayerArrow; m_idLayerText=pSrc->m_idLayerText; m_idTextStyle=pSrc->m_idTextStyle; } m_nViewCtrl=pSrc->m_nViewCtrl; } } Acad::ErrorStatus TDbCrossStair::subGetClassID(CLSID* pClsid) const { return Acad::eOk; } // 从DWG读入数据: Acad::ErrorStatus TDbCrossStair::dwgInFields (AcDbDwgFiler* pFiler) { assertWriteEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dwgInFields(pFiler); if(es != Acad::eOk) return es; Adesk::UInt8 nVer; pFiler->readItem(&nVer); if(nVer>g_nVersion) {// Version is too new return Acad::eMakeMeProxy; } pFiler->readItem((AcGePoint3d *)&m_ptLocation); pFiler->readItem(&m_nRotation); //旋转角度 pFiler->readItem(&m_nStepHeight); //踏步高 pFiler->readItem(&m_nStepWidth); //踏步宽 pFiler->readItem(&m_nStairWidth); //梯段段宽 pFiler->readItem(&m_nSlabSize); //休息平台左上尺寸 pFiler->readItem(&m_nSlabSizeUR); //休息平台右上尺寸 pFiler->readItem(&m_nSlabSizeLR); //休息平台右下尺寸 pFiler->readItem(&m_nStepNum); //楼梯步数 pFiler->readItem(&m_nSpaceWidth); //楼梯间尺寸 pFiler->readItem(&m_nRailHeight); //扶手高 pFiler->readItem(&m_nStairFlag); //楼层标记 pFiler->readItem(&m_nStartSide); //起步的一侧 pFiler->readItem(&m_nSideFlag); //首层有地下室或顶层有出屋面时的梯段标志: 0--无, 1--左侧, 2--右侧 pFiler->readItem(&m_nRailWidth); //扶手宽 pFiler->readItem(&m_nRailDistToSide); //扶手距离边 pFiler->readItem(&m_nRailDist); //扶手伸出距离 pFiler->readItem(&m_nSectStepNum); //剖断步数 pFiler->readItem(&m_dSectRotation); //剖断转角 pFiler->readItem(&m_dTextHeight); //字高 pFiler->readItem(&m_nFlagEx); pFiler->readItem(&m_nBeamHeight); pFiler->readItem(&m_nBeamThick); pFiler->readItem(&m_nSlabThick); pFiler->readItem(&m_idLayerHand3d); pFiler->readItem(&m_idLayerStep3d); pFiler->readItem(&m_idLayerBeam3d); pFiler->readItem(&m_idLayerRail3d); pFiler->readItem(&m_idLayerText); pFiler->readItem(&m_idTextStyle); pFiler->readItem(&m_idLayerArrow); pFiler->readItem(&m_nViewCtrl); return pFiler->filerStatus(); } Acad::ErrorStatus TDbCrossStair::dwgOutFields(AcDbDwgFiler* pFiler) const { assertReadEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dwgOutFields(pFiler); if(es != Acad::eOk) return es; pFiler->writeItem(g_nVersion); pFiler->writeItem((AcGePoint3d &)m_ptLocation); pFiler->writeItem(m_nRotation); //旋转角度 pFiler->writeItem(m_nStepHeight); //踏步高 pFiler->writeItem(m_nStepWidth); //踏步宽 pFiler->writeItem(m_nStairWidth); //梯段段宽 pFiler->writeItem(m_nSlabSize); //休息平台左上尺寸 pFiler->writeItem(m_nSlabSizeUR); //休息平台右上尺寸 pFiler->writeItem(m_nSlabSizeLR); //休息平台右下尺寸 pFiler->writeItem(m_nStepNum); //楼梯步数 pFiler->writeItem(m_nSpaceWidth); //楼梯间宽度 pFiler->writeItem(m_nRailHeight); //扶手高度 pFiler->writeItem(m_nStairFlag); //楼层标记 pFiler->writeItem(m_nStartSide); //起步的一侧 pFiler->writeItem(m_nSideFlag); //首层有地下室或顶层有出屋面时的梯段标志: 0--无, 1--左侧, 2--右侧 pFiler->writeItem(m_nRailWidth); //扶手宽 pFiler->writeItem(m_nRailDistToSide); //扶手距离边 pFiler->writeItem(m_nRailDist); //扶手伸出距离 pFiler->writeItem(m_nSectStepNum); //剖断步数 pFiler->writeItem(m_dSectRotation); //剖断转角 pFiler->writeItem(m_dTextHeight); //字高 pFiler->writeItem(m_nFlagEx); pFiler->writeItem(m_nBeamHeight); pFiler->writeItem(m_nBeamThick); pFiler->writeItem(m_nSlabThick); pFiler->writeItem(m_idLayerHand3d); pFiler->writeItem(m_idLayerStep3d); pFiler->writeItem(m_idLayerBeam3d); pFiler->writeItem(m_idLayerRail3d); pFiler->writeItem(m_idLayerText); pFiler->writeItem(m_idTextStyle); pFiler->writeItem(m_idLayerArrow); pFiler->writeItem(m_nViewCtrl); return pFiler->filerStatus(); } Acad::ErrorStatus TDbCrossStair::dxfInFields (AcDbDxfFiler* pFiler) { assertWriteEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dxfInFields(pFiler); if(es!=Acad::eOk) return es; if (!pFiler->atSubclassData(_T("TDbCrossStair"))) { return Acad::eBadDxfSequence; } Adesk::Int32 fieldsFlags=0; resbuf rb; double r1, r2, r3, r4, r5, r6, r7, r8, r9; int i1, i2, i3, i4, i5; XPoint pt; while ((es == Acad::eOk) && ((es = pFiler->readResBuf(&rb)) == Acad::eOk)) { switch (rb.restype) { case AcDb::kDxfXCoord: pt=rb.resval.rpoint; fieldsFlags |= 0x01; break; case AcDb::kDxfReal: r1=rb.resval.rreal; fieldsFlags |= 0x02; break; case AcDb::kDxfReal+1: r2=rb.resval.rreal; fieldsFlags |= 0x04; break; case AcDb::kDxfReal+2: r3=rb.resval.rreal; fieldsFlags |= 0x08; break; case AcDb::kDxfReal+3: r4=rb.resval.rreal; fieldsFlags |= 0x10; break; case AcDb::kDxfReal+4: r5=rb.resval.rreal; fieldsFlags |= 0x20; break; case AcDb::kDxfReal+5: r6=rb.resval.rreal; fieldsFlags |= 0x40; break; case AcDb::kDxfReal+6: r7=rb.resval.rreal; fieldsFlags |= 0x80; break; case AcDb::kDxfReal+7: r8=rb.resval.rreal; fieldsFlags |= 0x100; break; case AcDb::kDxfReal+8: m_dTextHeight=rb.resval.rreal; break; case AcDb::kDxfReal+9: m_nSlabSizeUR=rb.resval.rreal; break; case AcDb::kDxfReal+12: m_nSlabSizeLR=rb.resval.rreal; break; case AcDb::kDxfReal+13: m_dSectRotation=rb.resval.rreal; break; case AcDb::kDxfReal+11: m_nRailDist=rb.resval.rreal; break; case AcDb::kDxfAngle: r9 = rb.resval.rreal; fieldsFlags |= 0x200; break; case AcDb::kDxfInt16: i1=rb.resval.rint; fieldsFlags |= 0x400; break; case AcDb::kDxfInt16+1: i2=rb.resval.rint; fieldsFlags |= 0x800; break; case AcDb::kDxfInt16+2: i3=rb.resval.rint; fieldsFlags |= 0x1000; break; case AcDb::kDxfInt16+3: i4=rb.resval.rint; fieldsFlags |= 0x400; break; case AcDb::kDxfInt16+4: i5=rb.resval.rint; fieldsFlags |= 0x400; break; case 75: m_nViewCtrl=(Adesk::UInt8)rb.resval.rint; break; case 76: m_nSectStepNum=(int)rb.resval.rint; break; case 90: m_nFlagEx=rb.resval.rlong; break; case 145: m_nBeamHeight=rb.resval.rreal; break; case 146: m_nBeamThick=rb.resval.rreal; break; case 147: m_nSlabThick=rb.resval.rreal; break; case 412: m_idLayerStep3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 413: m_idLayerBeam3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 414: m_idLayerHand3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 415: m_idLayerRail3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 416: m_idLayerText=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 417: m_idTextStyle=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 418: m_idLayerArrow=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; //fall through intentional default: // An unrecognized group. Push it back so that // the subclass can read it again. pFiler->pushBackItem(); es = Acad::eEndOfFile; break; } } // At this point the es variable must contain eEndOfFile // - either from readResBuf() or from pushback. If not, // it indicates that an error happened and we should // return immediately. // if (es != Acad::eEndOfFile) return Acad::eInvalidResBuf; if (!(fieldsFlags&0x01)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 10")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x02)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 40")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x04)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 41")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x08)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 42")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x10)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 43")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x20)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 44")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x800)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 71")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x1000)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 72")); return Acad::eMissingDxfField; } m_ptLocation=pt; SetStepHeight(r1); SetSpaceWidth(r2); SetSlabSize(r3); SetStepWidth(r4); SetStairWidth(r5); if(fieldsFlags&0x40) SetRailHeight(r6); if(fieldsFlags&0x80) SetRailWidth(r7); if(fieldsFlags&0x100) SetRailDistToSide(r8); if(fieldsFlags&0x200) SetRotation(r9); if(fieldsFlags&0x400) SetStairFlag(i1); SetStepNum(i2); m_nStartSide=i4; m_nSideFlag=i5; return pFiler->filerStatus(); } Acad::ErrorStatus TDbCrossStair::dxfOutFields(AcDbDxfFiler* pFiler) const { assertReadEnabled(); Acad::ErrorStatus es; es = TDbPolyPathEnt::dxfOutFields(pFiler); assert(es == Acad::eOk); es = pFiler->writeItem(AcDb::kDxfSubclass,_T("TDbCrossStair")); assert(es == Acad::eOk); pFiler->writePoint3d(AcDb::kDxfXCoord, m_ptLocation); pFiler->writeDouble(AcDb::kDxfReal, GetStepHeight()); pFiler->writeDouble(AcDb::kDxfReal+1, GetSpaceWidth()); pFiler->writeDouble(AcDb::kDxfReal+2, GetSlabSize()); pFiler->writeDouble(AcDb::kDxfReal+3, GetStepWidth()); pFiler->writeDouble(AcDb::kDxfReal+4, GetStairWidth()); pFiler->writeDouble(AcDb::kDxfReal+5, GetRailHeight()); pFiler->writeDouble(AcDb::kDxfReal+6, GetRailWidth()); pFiler->writeDouble(AcDb::kDxfReal+7, GetRailDistToSide()); pFiler->writeDouble(AcDb::kDxfReal+8, GetTextHeight()); pFiler->writeDouble(AcDb::kDxfReal+9, GetSlabSizeUR()); pFiler->writeDouble(AcDb::kDxfReal+11, GetRailDist()); pFiler->writeDouble(AcDb::kDxfReal+12, GetSlabSizeLR()); pFiler->writeDouble(AcDb::kDxfReal+13, GetSectRotation()); pFiler->writeDouble(AcDb::kDxfAngle, GetRotation()); pFiler->writeInt16(AcDb::kDxfInt16, GetStairFlag()); pFiler->writeInt16(AcDb::kDxfInt16+1, GetStepNum()); pFiler->writeInt16(AcDb::kDxfInt16+3, m_nStartSide); pFiler->writeInt16(AcDb::kDxfInt16+4, m_nSideFlag); pFiler->writeInt16(AcDb::kDxfInt16+5, m_nViewCtrl); pFiler->writeInt16(AcDb::kDxfInt16+6, m_nSectStepNum); pFiler->writeInt32(90, m_nFlagEx); pFiler->writeDouble(145, m_nBeamHeight); pFiler->writeDouble(146, m_nBeamThick); pFiler->writeDouble(147, m_nSlabThick); pFiler->writeString(412, (const TCHAR *)LayerId2String(m_idLayerStep3d)); pFiler->writeString(413, (const TCHAR *)LayerId2String(m_idLayerBeam3d)); pFiler->writeString(414, (const TCHAR *)LayerId2String(m_idLayerHand3d)); pFiler->writeString(415, (const TCHAR *)LayerId2String(m_idLayerRail3d)); pFiler->writeString(416, (const TCHAR *)LayerId2String(m_idLayerText)); pFiler->writeString(417, (const TCHAR *)LayerId2String(m_idTextStyle)); pFiler->writeString(418, (const TCHAR *)LayerId2String(m_idLayerArrow)); return pFiler->filerStatus(); } Acad::ErrorStatus TDbCrossStair::subGetGripPoints(AcGePoint3dArray& gripPoints, AcDbIntArray& osnapModes, AcDbIntArray& geomIds) const { assertReadEnabled(); XPoint ptUpLeft=GetUpLeft2d(), ptUpRight=GetUpRight2d(); // 0,1,2,3--移动 gripPoints.append(ptUpLeft); gripPoints.append(ptUpRight); XPoint ptLeft, ptRight; double nDist=GetSlabSizeUR()+GetSlabSizeLR()+(m_nStepNum-1)*m_nStepWidth; ads_polar(ptUpLeft, m_nRotation-PI/2.0, nDist, ptLeft); ads_polar(ptUpRight, m_nRotation-PI/2.0, nDist, ptRight); gripPoints.append(ptLeft); gripPoints.append(ptRight); // 4,5--楼梯间 ads_polar(ptUpLeft, m_nRotation-PI/2.0, nDist*0.5, ptLeft); ads_polar(ptUpRight, m_nRotation-PI/2.0, nDist*0.5, ptRight); gripPoints.append(ptLeft); gripPoints.append(ptRight); // 6,7--楼梯边梯宽度 XPoint ptLeft1, ptRight1; ads_polar(ptLeft, m_nRotation, GetStairWidth(), ptLeft1); ads_polar(ptRight, m_nRotation+PI, GetStairWidth(), ptRight1); ads_polar(ptRight1, m_nRotation+PI*0.5, m_nStepWidth, ptRight1); gripPoints.append(ptLeft1); gripPoints.append(ptRight1); double dStairWidth=0.0; //井宽 dStairWidth = GetSpaceWidth() - GetStairWidth()*2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } // 8,9,10,11--梯段位置 XPoint ptSlabLeft, ptSlabRight; ads_polar(ptUpLeft, m_nRotation-PI/2.0, GetSlabSize(), ptSlabLeft); gripPoints.append(ptSlabLeft); ads_polar(ptSlabLeft, m_nRotation-PI/2.0, (m_nStepNum-1)*m_nStepWidth, ptSlabLeft); gripPoints.append(ptSlabLeft); ads_polar(ptUpRight, m_nRotation-PI/2.0, GetSlabSizeUR(), ptSlabRight); gripPoints.append(ptSlabRight); ads_polar(ptSlabRight, m_nRotation-PI/2.0, (m_nStepNum-1)*m_nStepWidth, ptSlabRight); gripPoints.append(ptSlabRight); // 12,13--休息平台 Midpoint(ptUpLeft,ptUpRight,ptSlabLeft); gripPoints.append(ptSlabLeft); ads_polar(ptSlabLeft, m_nRotation-PI/2.0, (m_nStepNum-1)*m_nStepWidth+m_nSlabSizeUR+m_nSlabSizeLR, ptSlabLeft); gripPoints.append(ptSlabLeft); //14,15--扶手伸出距离 { XPoint ptTmp; ads_polar(ptUpLeft, m_nRotation-PI/2, m_nSlabSize-m_nRailDist, ptTmp); ads_polar(ptTmp, m_nRotation, m_nStairWidth-m_nRailDistToSide-m_nRailWidth*0.5, ptTmp); gripPoints.append(ptTmp); double dLen=(m_nStepNum-1)*m_nStepWidth; ads_polar(ptUpLeft, m_nRotation-PI/2, m_nSlabSizeUR+m_nRailDist+dLen, ptTmp); ads_polar(ptTmp, m_nRotation, m_nStairWidth+dStairWidth+m_nRailDistToSide+m_nRailWidth*0.5, ptTmp); gripPoints.append(ptTmp); } //16,21--剖切位置 17,18,19,20--剖切线角度 { XPoint ptLeft, ptRight,ptLeft2, ptRight2; double lSectPos,rSectPos; if(CalSectPos(lSectPos,rSectPos,ptLeft,ptRight,ptLeft2, ptRight2)) { if(!(m_nStairFlag == SF_TOP && m_nSideFlag == 2)) { XPoint ptMid; Midpoint(ptLeft,ptRight,ptMid); gripPoints.append(ptMid); gripPoints.append(ptLeft); gripPoints.append(ptRight); } if(!(m_nStairFlag == SF_TOP && m_nSideFlag == 1)) { XPoint ptMid; Midpoint(ptLeft2,ptRight2,ptMid); gripPoints.append(ptMid); gripPoints.append(ptLeft2); gripPoints.append(ptRight2); } } } return Acad::eOk; } Acad::ErrorStatus TDbCrossStair::subGetStretchPoints(AcGePoint3dArray & stretchPoints) const { assertReadEnabled(); XPoint ptUpLeft=GetUpLeft2d(); stretchPoints.append(ptUpLeft); return Acad::eOk; } Acad::ErrorStatus TDbCrossStair::GetGripText(int i, CString &cs) const { switch(i) { case 0: case 1: case 2: case 3: cs=_T("移动楼梯"); break; case 4: case 5: cs=_T("改楼梯间宽度"); break; case 6: case 7: cs=_T("改梯段宽度"); break; case 8: case 9: case 10: case 11: cs=_T("调整梯段位置"); break; case 12: case 13: cs=_T("改平台宽"); break; case 14: case 15: cs=_T("改扶手伸出距离"); break; case 16: cs=_T("移动剖切位置"); break; case 17: case 18: cs=_T("移动剖切角度"); break; case 19: cs=_T("移动剖切位置"); break; case 20: case 21: cs=_T("移动剖切角度"); break; default: break; } return Acad::eOk; } Acad::ErrorStatus TDbCrossStair::subTransformBy(const AcGeMatrix3d& xform) { assertWriteEnabled(); TDbEntity::subTransformBy(xform); XPoint ptX, ptY; ads_polar(m_ptLocation, m_nRotation, GetSpaceWidth(), ptX); ads_polar(m_ptLocation, m_nRotation+PI/2.0, 1000.0, ptY); ((AcGePoint3d &)ptX).transformBy(xform); ((AcGePoint3d &)ptY).transformBy(xform); ((AcGePoint3d &)m_ptLocation).transformBy(xform); double nAng = CT_std_angle(ads_angle(m_ptLocation, ptY)- ads_angle(m_ptLocation, ptX)); if(fabs(nAng-PI*1.5)<_angSnap) { TchPrivate::Exchange(m_ptLocation, ptX); m_dSectRotation=-m_dSectRotation; m_nStartSide = !m_nStartSide; double nSlabSize=GetSlabSize(); m_nSlabSize = GetSlabSizeUR(); m_nSlabSizeUR=nSlabSize; if(m_nSideFlag==1) { m_nSideFlag=2; } else if (m_nSideFlag==2) { m_nSideFlag=1; } } m_nRotation = ads_angle(m_ptLocation, ptX); return Acad::eOk; } Acad::ErrorStatus TDbCrossStair::subMoveGripPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset) { assertWriteEnabled(); XPoint vtOffset=*(XPoint *)&offset; vtOffset.z = 0; double dLength=m_nSlabSizeUR+m_nSlabSizeLR; double nVtRot=CT_std_angle(ads_angle(XPoint(), vtOffset)-m_nRotation); double nIncWidth=ads_distance(XPoint(), vtOffset) * cos(nVtRot); double nIncLen=ads_distance(XPoint(), vtOffset) * sin(nVtRot); int nLen=indices.length(); for (int i = 0; i < nLen; i++) { int idx = indices[i]; switch(idx) { case 0: case 1: case 2: case 3: //移动楼梯 if(nLen==1) { m_ptLocation += vtOffset; } break; case 4: //改楼梯间宽度 if(m_nSpaceWidth-nIncWidth-2*m_nStairWidth>_DIST_SNAP) { m_nSpaceWidth -= nIncWidth; ads_polar(XPoint(m_ptLocation), m_nRotation, nIncWidth, m_ptLocation); } else { ads_polar(XPoint(m_ptLocation), m_nRotation, m_nSpaceWidth-m_nStairWidth*2, m_ptLocation); m_nSpaceWidth = m_nStairWidth*2; } break; case 5: //改楼梯间宽度 if(m_nSpaceWidth+nIncWidth-2*m_nStairWidth>_DIST_SNAP) m_nSpaceWidth += nIncWidth; else m_nSpaceWidth = m_nStairWidth*2; break; case 6: //改边梯段宽度 if(m_nStairWidth+nIncWidth > _DIST_SNAP && -1.0E-6 _DIST_SNAP && -1.0E-6_DIST_SNAP&&m_nSlabSize-nIncLendLength) m_nSlabSize = dLength; } break; case 10: case 11: //调整右梯段位置 { if(m_nSlabSizeUR-nIncLen>_DIST_SNAP&&m_nSlabSizeUR-nIncLendLength) { m_nSlabSizeUR = dLength; m_nSlabSizeLR = 0; } } break; case 12: //改休息台外侧尺寸 { double size=m_nSlabSize_DIST_SNAP) { m_nSlabSize += nIncLen; m_nSlabSizeUR += nIncLen; ads_polar(XPoint(m_ptLocation), m_nRotation+PI*0.5, nIncLen, m_ptLocation); } else { m_nSlabSize -= size; m_nSlabSizeUR -= size; ads_polar(XPoint(m_ptLocation), m_nRotation-PI*0.5, size, m_ptLocation); } } break; case 13: //改休息台外侧尺寸 { double nSlabSizeLL=dLength-m_nSlabSizeLR; double size=nSlabSizeLL_DIST_SNAP) { m_nSlabSizeLR -= nIncLen; } else { m_nSlabSizeLR -= size; } } break; case 14: //扶手伸出距离 if(m_nRailDist+nIncLen>_DIST_SNAP-(m_nStepNum-1)*m_nStepWidth*0.5) m_nRailDist += nIncLen; break; case 15: if(m_nRailDist-nIncLen>_DIST_SNAP-(m_nStepNum-1)*m_nStepWidth*0.5) m_nRailDist -= nIncLen; break; case 16: case 17: case 18: case 19: case 20: case 21: //剖切位置 { double lSectPos,rSectPos; XPoint ptLeft2d,ptRight2d,ptLeft2, ptRight2; double angle=m_dSectRotation; if(CalSectPos(lSectPos,rSectPos,ptLeft2d,ptRight2d,ptLeft2, ptRight2)) { XPoint ptMid; if(!(m_nStairFlag == SF_TOP && m_nSideFlag == 2)) { if(idx==16 ||idx==17 ||idx==18) { Midpoint(ptLeft2d,ptRight2d,ptMid); } else { Midpoint(ptLeft2,ptRight2,ptMid); ptLeft2d=ptLeft2; ptRight2d=ptRight2; } } else { if(m_nStairFlag == SF_TOP && m_nSideFlag == 2) { Midpoint(ptLeft2,ptRight2,ptMid); ptLeft2d=ptLeft2; ptRight2d=ptRight2; } } if(idx==16||idx==19) { XPoint ptHit2d; ptHit2d=ptMid; ptHit2d += vtOffset; int nPosHit=HitSectPosByPoint2d(ptHit2d); if(nPosHit!=-1) { m_nSectStepNum = nPosHit; } } else { XPoint ptTmp; ads_polar(ptMid, m_nRotation, m_nStairWidth, ptTmp); AcGeVector3d vectFrom,vectTo; vectFrom=ptMid-ptTmp; if(idx==17||idx==20) { ptTmp=ptLeft2d+vtOffset; vectTo=ptMid-ptTmp; } else { ptTmp=ptRight2d+vtOffset; vectTo=ptTmp-ptMid; } angle=vectFrom.angleTo(vectTo,AcGeVector3d::kZAxis); SetSectRotation(angle); } } break; } default: break; } } return Acad::eOk; //return TDbEntity::moveGripPointsAt(indices, offset); } Acad::ErrorStatus TDbCrossStair::subMoveStretchPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset) { assertWriteEnabled(); if(indices.length()) { AcGeMatrix3d mat; mat.setToTranslation(offset); subTransformBy(mat); } return Acad::eOk; } const TCHAR * TDbCrossStair::GetDefaultLayer() const { return LAY_STAIR; } void TDbCrossStair::GetTips(DList &lstInfo) const { lstInfo.Append(new TObjInfoUnit(_T("对象类型"), _T("剪刀楼梯"))); lstInfo.Append(new TObjInfoUnit(_T("楼梯步数"), XString(_T("%d"), int(GetStepNum())))); lstInfo.Append(new TObjInfoUnit(_T("踏步高"), Dist2Str(GetStepHeight()))); lstInfo.Append(new TObjInfoUnit(_T("踏步宽"), Dist2Str(GetStepWidth()))); lstInfo.Append(new TObjInfoUnit(_T("楼梯高"), Dist2Str(GetStepHeight()*GetStepNum()))); lstInfo.Append(new TObjInfoUnit(_T("梯段宽"), Dist2Str(GetStairWidth()))); lstInfo.Append(new TObjInfoUnit(_T("梯间宽"), Dist2Str(GetSpaceWidth()))); lstInfo.Append(new TObjInfoUnit(_T("扶手宽"), Dist2Str(GetRailWidth()))); lstInfo.Append(new TObjInfoUnit(_T("扶手边距"), Dist2Str(GetRailDistToSide()))); lstInfo.Append(new TObjInfoUnit(_T("平台宽"), Dist2Str(GetSlabSize()))); lstInfo.Append(new TObjInfoUnit(_T("底标高"), Dist2Str(GetElevation()))); const TCHAR *pszFloor=_T("首层"); if(m_nStairFlag==1) pszFloor=_T("中间层"); else if(m_nStairFlag==2) pszFloor=_T("顶层"); lstInfo.Append(new TObjInfoUnit(_T("楼层标记"), pszFloor)); lstInfo.Append(new TObjInfoUnit(_T("上楼位置"), m_nStartSide? _T("右边") : _T("左边"))); } Acad::ErrorStatus TDbCrossStair::ExplodeTo(TDbLineStair &stair1, //[in/out]左梯段 TDbLineStair &stair2, //[in/out]右梯段 TDbSlab &slab, //[in/out]休息平台 TDbSlab &slab2, //[in/out]休息平台 TDbHandRail &rail, //[in/out]左扶手 TDbHandRail &rail2, //[in/out]右扶手 TDbHandRail* pRailOut1, //[out]边跑左梯段外侧扶手 TDbHandRail*pRailOut2 //[out]边跑右梯段外侧扶手 ) const { assertReadEnabled(); XPoint ptUpLeft=GetUpLeft2d(), ptUpRight=GetUpRight2d(); XPoint ptLowLeft, ptLowRight; //休息平台板的顶点 double nLen1=(m_nStepNum-1)*m_nStepWidth; ads_polar(ptUpLeft, m_nRotation-PI/2.0, m_nSlabSize, ptLowLeft); ads_polar(ptUpRight, m_nRotation-PI/2.0, m_nSlabSizeUR, ptLowRight); //设置梯段宽度 stair1.SetStairWidth(m_nStairWidth); stair2.SetStairWidth(m_nStairWidth); //设置踏步高度 stair1.SetStepHeight(m_nStepHeight); stair2.SetStepHeight(m_nStepHeight); //设置踏步宽度 stair1.SetStepWidth(m_nStepWidth); stair2.SetStepWidth(m_nStepWidth); //设置踏步数 stair1.SetStepNum(m_nStepNum); stair2.SetStepNum(m_nStepNum); //设置踏步旋转角度 if(m_nStartSide == OFFSET_LEFT) { stair1.SetRotation(m_nRotation); stair2.SetRotation(m_nRotation+PI); } else { stair1.SetRotation(m_nRotation+PI); stair2.SetRotation(m_nRotation); } //计算梯段位置 XPoint ptLoc1, ptLoc2; if(m_nStartSide==OFFSET_LEFT) //左边上楼 { ads_polar(ptLowLeft, m_nRotation-PI/2, nLen1, ptLoc1); ptLoc2=ptLowRight; } else //右边上楼 { ads_polar(ptLowLeft, m_nRotation, m_nStairWidth, ptLoc1); XPoint ptTmp; ads_polar(ptLowRight, m_nRotation+PI, m_nStairWidth, ptTmp); ads_polar(ptTmp, m_nRotation-PI/2, nLen1, ptLoc2); } ptLoc1.z=ptLoc2.z=GetElevation(); //设置梯段位置 stair1.SetLocation(ptLoc1); stair2.SetLocation(ptLoc2); //设置梯段标记 stair1.Set3DFlag(SF_HAS3D); stair2.Set3DFlag(SF_HAS3D); if(m_nStairFlag==SF_FIRST) //首层 { if(m_nSideFlag == 0) //无地下室 { stair1.Set2DFlag(SF_1SECT); stair2.Set2DFlag(SF_1SECT); } else if (m_nSideFlag == 1) //左侧下行 { stair1.Set2DFlag(SF_2SECT); stair2.Set2DFlag(SF_1SECT); } else //右侧下行 { stair1.Set2DFlag(SF_1SECT); stair2.Set2DFlag(SF_2SECT); } } else if(m_nStairFlag==SF_MIDDLE) //中间层 { stair1.Set2DFlag(SF_2SECT); stair2.Set2DFlag(SF_2SECT); } else //顶层 { if(m_nSideFlag == 0) //无出屋顶 { stair1.Set2DFlag(SF_NOSECT); stair2.Set2DFlag(SF_NOSECT); } else if (m_nSideFlag == 1) //左侧上行 { stair1.Set2DFlag(SF_2SECT); stair2.Set2DFlag(SF_NOSECT); } else //右侧上行 { stair1.Set2DFlag(SF_NOSECT); stair2.Set2DFlag(SF_2SECT); } } // 设置边梁属性 /*for(int nSide=0; nSide<2; nSide++) { stair1.SetSideBeam(nSide, HasSideBeam(nSide)); stair2.SetSideBeam(nSide, HasSideBeam(nSide)); }*/ if(m_nStartSide==OFFSET_LEFT) { stair1.SetSideBeam(0, IsOutSideBeam()); stair2.SetSideBeam(0, IsOutSideBeam()); stair1.SetSideBeam(1, IsInSideBeam()); stair2.SetSideBeam(1, IsInSideBeam()); } else { stair1.SetSideBeam(1, IsOutSideBeam()); stair2.SetSideBeam(1, IsOutSideBeam()); stair1.SetSideBeam(0, IsInSideBeam()); stair2.SetSideBeam(0, IsInSideBeam()); } ///////////////////////////////////////////////////////////////// //扶手, 考虑了详图画法 double nDistToSide=(GetSpaceWidth()-2*GetStairWidth())<_DIST_SNAP*2 ? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double dStairWidth=0.0; //井宽 dStairWidth = (m_nSpaceWidth - m_nStairWidth*2.0); if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } XPoly2D polyRail,polyRail2,polyRail2D; //左右内侧扶手 XPoint ptStart,ptStart2; { int nSide = 0; //左右扶手 double dist = nDistToSide; if(m_nStartSide==OFFSET_LEFT) { nSide = 1; dist = -nDistToSide; } XLine line1=stair1.GetSideCurve2d(nSide).Offset(dist,0); GetRailPoly(line1,stair1.GetRotation(),stair1.GetStairHeight(),polyRail,m_nStairFlag==SF_TOP); XLine line2=stair2.GetSideCurve2d(nSide).Offset(dist,0); GetRailPoly(line2,stair2.GetRotation(),stair2.GetStairHeight(),polyRail2,m_nStairFlag==SF_TOP); } polyRail.SetFlag(0); polyRail2.SetFlag(0); rail.SetHas2D(TRUE); rail.SetHas3D(TRUE); rail2.SetHas2D(TRUE); rail2.SetHas3D(TRUE); rail.SetPathPoly(polyRail,GetNormal().AsAcGeVector3d()); rail.SetWidth(m_nRailWidth); rail.SetHeight(m_nRailHeight); rail.SetStyle(TDbHandRail::RS_RAIL1); rail2.SetPathPoly(polyRail2,GetNormal().AsAcGeVector3d()); rail2.SetWidth(m_nRailWidth); rail2.SetHeight(m_nRailHeight); rail2.SetStyle(TDbHandRail::RS_RAIL1); //外侧扶手 double nDist=m_nStartSide==OFFSET_LEFT?nDistToSide:-nDistToSide; if(pRailOut1!=0) //左边梯外侧扶手 { XPoly2D poly; XLine line=stair1.GetSideCurve2d(m_nStartSide==OFFSET_LEFT?0:1).Offset(nDist,0); GetRailPoly(line,stair1.GetRotation(),stair1.GetStairHeight(),poly); if(m_nStairFlag == SF_TOP && m_nSideFlag != 1) { //处理扶手端点 XPoint ptA; ptA = *poly.Head(); ads_polar(ptA, stair1.GetRotation()+PI/2, m_nRailWidth*0.5, ptA); *poly.Head() = ptA; } pRailOut1->SetPathPoly(poly,GetNormal().AsAcGeVector3d()); pRailOut1->SetWidth(m_nRailWidth); pRailOut1->SetHeight(m_nRailHeight); pRailOut1->SetStyle(TDbHandRail::RS_RAIL1); } if(pRailOut2!=0) //右边梯外侧扶手 { XLine line=stair2.GetSideCurve2d(m_nStartSide==OFFSET_LEFT?0:1).Offset(nDist,0); XPoly2D poly; GetRailPoly(line,stair2.GetRotation(),stair2.GetStairHeight(),poly); if(m_nStairFlag == SF_TOP && m_nSideFlag != 2) { //处理扶手端点 XPoint ptA; ptA = *poly.Head(); ads_polar(ptA, stair2.GetRotation()+PI/2, m_nRailWidth*0.5, ptA); *poly.Head() = ptA; } pRailOut2->SetPathPoly(poly,GetNormal().AsAcGeVector3d()); pRailOut2->SetWidth(m_nRailWidth); pRailOut2->SetHeight(m_nRailHeight); pRailOut2->SetStyle(TDbHandRail::RS_RAIL1); } //休息平台 //if(m_nSlabSize>_DIST_SNAP) { XPoint pt; XPoly2D polySlab(1),polySlab2(1); polySlab.AppendNode(ptUpRight); polySlab.AppendNode(ptUpLeft); polySlab.AppendNode(ptLowLeft); if(m_nSlabSize_DIST_SNAP) { ads_polar(ptLowLeft, m_nRotation, m_nStairWidth, pt); polySlab.AppendNode(pt); ads_polar(pt, m_nRotation+PI/2, m_nSlabSize-m_nSlabSizeUR, pt); polySlab.AppendNode(pt); } } polySlab.AppendNode(ptLowRight); if(polySlab.PathArea()>0) polySlab.Reverse(); slab.SetOutline(polySlab); //add by xlc on 090219 slab.SetElevation(GetElevation()); slab.SetThickness(-m_nSlabThick); ads_polar(ptLowRight, m_nRotation-PI/2, stair1.GetStairLength(), pt); polySlab2.AppendNode(pt); ads_polar(pt, m_nRotation-PI/2, m_nSlabSizeLR, pt); polySlab2.AppendNode(pt); ads_polar(pt, m_nRotation+PI, m_nSpaceWidth, pt); polySlab2.AppendNode(pt); double nSlabSizeLL=m_nSlabSizeUR+m_nSlabSizeLR-m_nSlabSize; ads_polar(pt, m_nRotation+PI/2, nSlabSizeLL, pt); polySlab2.AppendNode(pt); if(m_nSlabSizeLR_DIST_SNAP) { ads_polar(pt, m_nRotation, m_nSpaceWidth-m_nStairWidth, pt); polySlab2.AppendNode(pt); ads_polar(pt, m_nRotation+PI/2, m_nSlabSizeLR-nSlabSizeLL, pt); polySlab2.AppendNode(pt); } } if(polySlab2.PathArea()>0) polySlab2.Reverse(); slab2.SetOutline(polySlab2); //add by xlc on 090219 slab2.SetElevation(GetElevation()); slab2.SetThickness(-m_nSlabThick); } stair1.setPropertiesFrom(this); stair2.setPropertiesFrom(this); stair1.SetBeamHeight(GetBeamHeight()); stair2.SetBeamHeight(GetBeamHeight()); stair1.SetBeamThick(GetBeamThick()); stair2.SetBeamThick(GetBeamThick()); slab.setPropertiesFrom(this); slab2.setPropertiesFrom(this); rail.setPropertiesFrom(this); rail2.setPropertiesFrom(this); if(pRailOut1!=NULL) pRailOut1->setPropertiesFrom(this); if(pRailOut2!=NULL) pRailOut2->setPropertiesFrom(this); if(m_idLayerStep3d.isValid()) { slab.setLayer(m_idLayerStep3d); slab2.setLayer(m_idLayerStep3d); stair1.SetLayerStep3d(m_idLayerStep3d); stair2.SetLayerStep3d(m_idLayerStep3d); } if(m_idLayerBeam3d.isValid()) { stair1.SetLayerBeam3d(m_idLayerBeam3d); stair2.SetLayerBeam3d(m_idLayerBeam3d); } if(m_idLayerHand3d.isValid()) { rail.setLayer(m_idLayerHand3d); rail2.setLayer(m_idLayerHand3d); if(pRailOut1!=NULL) pRailOut1->setLayer(m_idLayerHand3d); if(pRailOut2!=NULL) pRailOut2->setLayer(m_idLayerHand3d); } return Acad::eOk; } void TDbCrossStair::GetRailPoly(XLine line, //[in]梯段线 double direct, //[in]梯段法向 double height, //[in]梯段高 XPoly2D &poly, //[in/out]扶手线 BOOL bTop //[in]是否顶层扶手线 )const { XPoint ptStart; if(m_nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { if(bTop) { ptStart=line.StartPoint(); ptStart.z=m_ptLocation.z+m_nStepHeight*0.5; poly.AppendNode(ptStart); //扶手下伸出点 } else { ads_polar(line.StartPoint(), direct-PI/2, m_nRailDist, ptStart); ptStart.z=m_ptLocation.z; poly.AppendNode(ptStart); //扶手下伸出点 ads_polar(line.StartPoint(), direct-PI/2, m_nStepWidth*0.5, ptStart); ptStart.z=m_ptLocation.z; poly.AppendNode(ptStart); //扶手折点 } ads_polar(line.EndPoint(), direct+PI/2, m_nStepWidth*0.5, ptStart); ptStart.z=m_ptLocation.z+height; poly.AppendNode(ptStart); //扶手折点 ads_polar(ptStart, direct+PI/2, m_nRailDist-m_nStepWidth*0.5, ptStart); poly.AppendNode(ptStart); //扶手上伸出点 } else { if(bTop&&(m_nRailDist>0)) { ptStart=line.StartPoint(); ptStart.z=m_ptLocation.z+m_nStepHeight*0.5; poly.AppendNode(ptStart); //扶手下伸出点 } else { ads_polar(line.StartPoint(), direct-PI/2, m_nRailDist, ptStart); ptStart.z=m_ptLocation.z+fabs(m_nRailDist)/line.GetLength()*(height-m_nStepHeight)+m_nStepHeight*0.5; poly.AppendNode(ptStart); //扶手回缩点 } ads_polar(line.EndPoint(), direct+PI/2, m_nRailDist, ptStart); ptStart.z=m_ptLocation.z+height+m_nRailDist/line.GetLength()*(height-m_nStepHeight)-m_nStepHeight*0.5; poly.AppendNode(ptStart); //扶手回缩点 } } void TDbCrossStair::GetDefaultArrow(TDbLineStair &stair1,TDbLineStair &stair2, TDbSymbArrow*pArrowUp1,TDbSymbArrow*pArrowUp2, TDbSymbArrow*pArrowDown1,TDbSymbArrow*pArrowDown2)const { assertReadEnabled(); int nSectStepNum=m_nSectStepNum; //剖断步数 if(nSectStepNum < 0) //负数调整为正的 { nSectStepNum=m_nSectStepNum+m_nStepNum+1; } if(nSectStepNum==m_nStepNum) { nSectStepNum--; } XPoint pt1,pt2,pt3,pt4,pt5,pt6,pt7,pt8,pt; /*----------点相对位置示意---------------------- __________________ *pt4 | *pt5 | | | | *pt3 | *pt6 *pt2 | *pt7 | | | | *pt1 | *pt8 ------------------------------------------------*/ ads_polar(stair1.GetLocation(),stair1.GetRotation(),stair1.GetStairWidth()/2,pt); if(m_nStartSide==OFFSET_LEFT) //左边起步 { ads_polar(pt,stair1.GetRotation()+PI/2,m_nStepWidth*(nSectStepNum-1),pt2); ads_polar(pt,stair1.GetRotation()+PI/2,m_nStepWidth*nSectStepNum,pt3); ads_polar(stair2.GetLocation(),stair2.GetRotation(),stair2.GetStairWidth()*0.5,pt); ads_polar(pt,stair2.GetRotation()+PI/2,m_nStepWidth*(nSectStepNum-1),pt6); ads_polar(pt,stair2.GetRotation()+PI/2,m_nStepWidth*nSectStepNum,pt7); } else //右边起步 { ads_polar(pt,stair1.GetRotation()+PI/2,m_nStepWidth*(nSectStepNum-1),pt3); ads_polar(pt,stair1.GetRotation()+PI/2,m_nStepWidth*nSectStepNum,pt2); ads_polar(stair2.GetLocation(),stair2.GetRotation(),stair2.GetStairWidth()*0.5,pt); ads_polar(pt,stair2.GetRotation()+PI/2,m_nStepWidth*(nSectStepNum-1),pt7); ads_polar(pt,stair2.GetRotation()+PI/2,m_nStepWidth*nSectStepNum,pt6); } ads_polar(GetUpLeft2d(),GetRotation(),m_nStairWidth*0.5,pt); ads_polar(pt,GetRotation()-PI/2,GetSlabSize()-m_nStepWidth*0.5,pt4); ads_polar(pt4,GetRotation()-PI/2,stair1.GetStairLength()+m_nStepWidth,pt1); ads_polar(GetUpRight2d(),GetRotation()+PI,m_nStairWidth*0.5,pt); ads_polar(pt,GetRotation()-PI/2,GetSlabSizeUR()-m_nStepWidth*0.5,pt5); ads_polar(pt5,GetRotation()-PI/2,stair1.GetStairLength()+m_nStepWidth,pt8); if(m_nStairFlag != SF_TOP) //首层和中间层 { XPoly2D poly; if(m_nStartSide==OFFSET_LEFT) //左边起步 { poly.AppendNode(pt1); poly.AppendNode(pt2); XPoly2D poly2; poly2.AppendNode(pt5); poly2.AppendNode(pt6); poly2.SetElevation(GetElevation()); pArrowUp2->SetPoly2D(poly2); if(m_nStairFlag == SF_FIRST && m_nSideFlag == 1) //首层左边有下行梯段 { XPoly2D poly3; poly3.AppendNode(pt4); poly3.AppendNode(pt3); poly3.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly3); } else if(m_nStairFlag == SF_FIRST && m_nSideFlag == 2)//首层右边有下行梯段 { XPoly2D poly3; poly3.AppendNode(pt8); poly3.AppendNode(pt7); poly3.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly3); } else if(m_nStairFlag == SF_MIDDLE) { XPoly2D poly3; poly3.AppendNode(pt4); poly3.AppendNode(pt3); poly3.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); XPoly2D poly4; poly4.AppendNode(pt8); poly4.AppendNode(pt7); poly4.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly4); } } else //右边起步 { poly.AppendNode(pt8); poly.AppendNode(pt7); XPoly2D poly2; poly2.AppendNode(pt4); poly2.AppendNode(pt3); poly2.SetElevation(GetElevation()); pArrowUp2->SetPoly2D(poly2); if(m_nStairFlag == SF_FIRST && m_nSideFlag == 1) //首层左边有下行梯段 { XPoly2D poly3; poly3.AppendNode(pt1); poly3.AppendNode(pt2); poly3.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly3); } else if(m_nStairFlag == SF_FIRST && m_nSideFlag == 2)//首层右边有下行梯段 { XPoly2D poly3; poly3.AppendNode(pt5); poly3.AppendNode(pt6); poly3.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly3); } else if(m_nStairFlag == SF_MIDDLE) { XPoly2D poly3; poly3.AppendNode(pt1); poly3.AppendNode(pt2); poly3.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); XPoly2D poly4; poly4.AppendNode(pt5); poly4.AppendNode(pt6); poly4.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly4); } } poly.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly); } else //顶层 { XPoly2D poly1; XPoly2D poly2; if(m_nStartSide==OFFSET_LEFT) //左边起步 { if(m_nSideFlag == 0) //无出屋顶 { poly1.AppendNode(pt4); XPoint tmp; ads_polar(pt4,GetRotation()-PI/2,stair1.GetStairLength()-m_nStepWidth*0.5,tmp); poly1.AppendNode(tmp); poly2.AppendNode(pt8); ads_polar(pt8,GetRotation()+PI/2,stair1.GetStairLength()-m_nStepWidth*0.5,tmp); poly2.AppendNode(tmp); } else if(m_nSideFlag == 1) //左边有出屋顶 { poly1.AppendNode(pt4); poly1.AppendNode(pt3); poly2.AppendNode(pt8); XPoint tmp; ads_polar(pt8,GetRotation()+PI/2,stair1.GetStairLength()-m_nStepWidth*0.5,tmp); poly2.AppendNode(tmp); XPoly2D poly3; poly3.AppendNode(pt1); poly3.AppendNode(pt2); poly3.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly3); } else //右边有出屋顶 { poly1.AppendNode(pt4); XPoint tmp; ads_polar(pt4,GetRotation()-PI/2,stair1.GetStairLength()-m_nStepWidth*0.5,tmp); poly1.AppendNode(tmp); poly2.AppendNode(pt8); poly2.AppendNode(pt7); XPoly2D poly3; poly3.AppendNode(pt5); poly3.AppendNode(pt6); poly3.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly3); } } else //右边起步 { if(m_nSideFlag == 0) //无出屋顶 { poly1.AppendNode(pt1); XPoint tmp; ads_polar(pt1,GetRotation()+PI/2,stair1.GetStairLength()-m_nStepWidth*0.5,tmp); poly1.AppendNode(tmp); poly2.AppendNode(pt5); ads_polar(pt5,GetRotation()-PI/2,stair1.GetStairLength()-m_nStepWidth*0.5,tmp); poly2.AppendNode(tmp); } else if(m_nSideFlag == 1) //左边有出屋顶 { poly1.AppendNode(pt1); poly1.AppendNode(pt2); poly2.AppendNode(pt5); XPoint tmp; ads_polar(pt5,GetRotation()-PI/2,stair1.GetStairLength()-m_nStepWidth*0.5,tmp); poly2.AppendNode(tmp); XPoly2D poly3; poly3.AppendNode(pt4); poly3.AppendNode(pt3); poly3.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly3); } else //右边有出屋顶 { poly1.AppendNode(pt1); XPoint tmp; ads_polar(pt1,GetRotation()+PI/2,stair1.GetStairLength()-m_nStepWidth*0.5,tmp); poly1.AppendNode(tmp); poly2.AppendNode(pt5); poly2.AppendNode(pt6); XPoly2D poly3; poly3.AppendNode(pt8); poly3.AppendNode(pt7); poly3.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly3); } } poly1.SetElevation(GetElevation()); poly2.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly1); pArrowDown2->SetPoly2D(poly2); } { pArrowUp1->setPropertiesFrom(this); //add by xlc on 090212 pArrowUp1->SetTextHeight(m_dTextHeight); //modify by xlc on 090205 pArrowUp1->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowUp1->SetText(_T("上")); pArrowUp1->SetText(GetTextUp()); pArrowUp1->SetTextAlign(TDbSymbArrow::kAtSide); pArrowUp1->SetTextLocation(pArrowUp1->GetDefaultTextLocation()); pArrowUp1->SetTextLayerId(m_idLayerText); pArrowUp1->SetTextStyleId(m_idTextStyle); pArrowUp2->setPropertiesFrom(this); //add by xlc on 090212 pArrowUp2->SetTextHeight(m_dTextHeight); pArrowUp2->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowUp2->SetText(_T("上")); pArrowUp2->SetText(GetTextUp()); pArrowUp2->SetTextAlign(TDbSymbArrow::kAtSide); pArrowUp2->SetTextLocation(pArrowUp2->GetDefaultTextLocation()); pArrowUp2->SetTextLayerId(m_idLayerText); pArrowUp2->SetTextStyleId(m_idTextStyle); pArrowDown1->setPropertiesFrom(this); //add by xlc on 090212 pArrowDown1->SetTextHeight(m_dTextHeight); pArrowDown1->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowDown1->SetText(_T("下")); pArrowDown1->SetText(GetTextDown()); pArrowDown1->SetTextAlign(TDbSymbArrow::kAtSide); pArrowDown1->SetTextLocation(pArrowDown1->GetDefaultTextLocation()); pArrowDown1->SetTextLayerId(m_idLayerText); pArrowDown1->SetTextStyleId(m_idTextStyle); pArrowDown2->setPropertiesFrom(this); //add by xlc on 090212 pArrowDown2->SetTextHeight(m_dTextHeight); pArrowDown2->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowDown2->SetText(_T("下")); pArrowDown2->SetText(GetTextDown()); pArrowDown2->SetTextAlign(TDbSymbArrow::kAtSide); pArrowDown2->SetTextLocation(pArrowDown2->GetDefaultTextLocation()); pArrowDown2->SetTextLayerId(m_idLayerText); pArrowDown2->SetTextStyleId(m_idTextStyle); if(m_idLayerArrow.isValid()) { pArrowUp1->setLayer(m_idLayerArrow); pArrowUp2->setLayer(m_idLayerArrow); pArrowDown1->setLayer(m_idLayerArrow); pArrowDown2->setLayer(m_idLayerArrow); } } } //add by xlc on 090123 获得梯段扶手线的位置 void TDbCrossStair::GetRailPolyFromStair(TDbLineStair &stair, //[in]操作梯段 double dOffset, //[in]偏移距离 double dDistS, //[in]起始端伸出距离 double dDistE, //[in]终端伸出距离 BOOL bRight, //[in]扶手侧 XPoly2D &poly //[out]扶手线 )const { poly.Reset(); XLine line=stair.GetSideCurve2d(bRight).Offset(dOffset,0); XPoint pt=line.StartPoint(); pt.z=stair.GetElevation()+0.5*m_nStepHeight; if(dDistS<-0.5*m_nStepWidth+_DIST_SNAP) { int num=(int)fabs((dDistS-0.5*m_nStepWidth)/m_nStepWidth); ads_polar(pt, stair.GetRotation()+PI/2,m_nStepWidth*num, pt); pt.z+=m_nStepHeight*num; } poly.AppendNode(pt); pt=line.EndPoint(); pt.z=stair.GetElevation()+stair.GetStairHeight()-0.5*m_nStepHeight; if(dDistE<-0.5*m_nStepWidth+_DIST_SNAP) { int num=(int)fabs((dDistE-0.5*m_nStepWidth)/m_nStepWidth); ads_polar(pt, stair.GetRotation()-PI/2,m_nStepWidth*num, pt); pt.z-=m_nStepHeight*num; } poly.AppendNode(pt); } void TDbCrossStair::DrawRail(XPoly2D polyPath,double nStepWidth,XExplodeDraw &dc) const { double nTotalDist=polyPath.Distance2d(); int nRailNum=AS_INT(nTotalDist/nStepWidth); if(nRailNum<1) nRailNum=1; double nStepW=nTotalDist/nRailNum; double nRailHeight=m_nRailHeight-_AS_SYS_UNIT(20); if(m_nRailDistToSide < -_DIST_SNAP)//扶手偏移距离为负时栏杆增加一个踏步高 nRailHeight += m_nStepHeight; for(int iRail=0; iRailz -= m_nStepHeight; } } dc.DrawMesh(poly2d, XVector3D(0,0,nRailHeight)); } } Acad::ErrorStatus TDbCrossStair::ExplodeOrDraw3d(XExplodeDraw &dc) const { if(m_nViewCtrl==1) return Acad::eOk; //三维被禁止 if (m_nStepNum<2) { return Acad::eOk; } assertReadEnabled(); TDbLineStair stair1, stair2; TDbSlab slab,slab2; TDbHandRail rail, rail2,railOut1,railOut2; ExplodeTo(stair1, stair2, slab, slab2,rail, rail2,&railOut1,&railOut2); { //左边梯段 if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 1)) { TPushProperty vProp(&stair1, dc); if(dc.IsFullExplode()) stair1.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair1); } //右边梯段 if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 2)) { TPushProperty vProp(&stair2, dc); if(dc.IsFullExplode()) stair2.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair2); } //休息平台 double nSlabSizeLL=m_nSlabSizeUR+m_nSlabSizeLR-m_nSlabSize; if((m_nSlabSize>_DIST_SNAP||m_nSlabSizeUR>_DIST_SNAP||m_nSlabSizeLR>_DIST_SNAP||nSlabSizeLL>_DIST_SNAP ) && !(m_nStairFlag == SF_TOP && m_nSideFlag == 0)) { TPushProperty vProp(&slab, dc); if(dc.IsFullExplode()) { if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && ((m_nSideFlag == 2 && m_nStartSide == OFFSET_LEFT) ||(m_nSideFlag == 1 && m_nStartSide == OFFSET_RIGHT)))) { slab.ExplodeOrDraw3d(dc); } if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && ((m_nSideFlag == 1 && m_nStartSide == OFFSET_LEFT) ||(m_nSideFlag == 2 && m_nStartSide == OFFSET_RIGHT)))) { slab2.ExplodeOrDraw3d(dc); } } else { if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && ((m_nSideFlag == 2 && m_nStartSide == OFFSET_LEFT) ||(m_nSideFlag == 1 && m_nStartSide == OFFSET_RIGHT)))) { dc.DrawEntity(slab); } if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && ((m_nSideFlag == 1 && m_nStartSide == OFFSET_LEFT) ||(m_nSideFlag == 2 && m_nStartSide == OFFSET_RIGHT)))) { dc.DrawEntity(slab2); } } } //add by xlc on 090123 double nDistToSide=(GetSpaceWidth()-2*GetStairWidth())<_DIST_SNAP*2 ? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; if(!(m_nStairFlag == SF_TOP && m_nSideFlag == 0)) { //外侧扶手 if(IsOutRail()) { if(dc.IsFullExplode()) { if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 1)) { railOut1.ExplodeOrDraw3d(dc); } if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 2)) { railOut2.ExplodeOrDraw3d(dc); } } else { if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 1)) { dc.DrawEntity(railOut1); } if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 2)) { dc.DrawEntity(railOut2); } } // 外侧栏杆 if(IsAutoOutRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 1)) { XPoly2D polyPath=railOut1.GetOutline(); //add by xlc on 090123 修改栏杆画法，只在踏步中间画 GetRailPolyFromStair(stair1,m_nStartSide==OFFSET_LEFT?nDistToSide:-nDistToSide,m_nRailDist,m_nRailDist,m_nStartSide,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 2)) { XPoly2D polyPath=railOut2.GetOutline(); //add by xlc on 090123 修改栏杆画法，只在踏步中间画 GetRailPolyFromStair(stair2,m_nStartSide==OFFSET_LEFT?nDistToSide:-nDistToSide,m_nRailDist,m_nRailDist,m_nStartSide,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } } } } if(IsInRail()) { extern BOOL g_bInElevProcess; if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 1)) { //内侧扶手 TPushProperty vProp(&rail, dc); if(g_bInElevProcess) { XPoly2D polyPath; AcGeVector3d normal; rail.GetPathPoly(polyPath,normal); for(int mm=0; mm_DIST_SNAP) { XPoly2D poly3d(0); poly3d.AppendNode(cv.StartPoint(), cv.GetBulge()); poly3d.AppendNode(cv.EndPoint()); rail.SetPathPoly(poly3d,normal); if(dc.IsFullExplode()) rail.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail); } } rail.SetPathPoly(polyPath,normal); } else { if(dc.IsFullExplode()) rail.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail); } // 内侧栏杆 if(IsAutoRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=rail.GetOutline(); //add by xlc on 090123 修改栏杆画法，只在踏步中间画 GetRailPolyFromStair(stair1,m_nStartSide==OFFSET_LEFT?-nDistToSide:nDistToSide,m_nRailDist,m_nRailDist,!m_nStartSide,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } } if(m_nStairFlag == SF_FIRST ||m_nStairFlag == SF_MIDDLE ||(m_nStairFlag == SF_TOP && m_nSideFlag == 2)) { //内侧扶手 TPushProperty vProp2(&rail2, dc); if(g_bInElevProcess) { XPoly2D polyPath; AcGeVector3d normal; rail2.GetPathPoly(polyPath,normal); for(int mm=0; mm_DIST_SNAP) { XPoly2D poly3d(0); poly3d.AppendNode(cv.StartPoint(), cv.GetBulge()); poly3d.AppendNode(cv.EndPoint()); rail2.SetPathPoly(poly3d,normal); if(dc.IsFullExplode()) rail2.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail2); } } rail2.SetPathPoly(polyPath,normal); } else { if(dc.IsFullExplode()) rail2.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail2); } // 内侧栏杆 if(IsAutoRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=rail2.GetOutline(); //add by xlc on 090123 修改栏杆画法，只在踏步中间画 GetRailPolyFromStair(stair2,m_nStartSide==OFFSET_LEFT?-nDistToSide:nDistToSide,m_nRailDist,m_nRailDist,!m_nStartSide,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } } } /*else { if(m_nSideFlag == 0) { TPushProperty vProp(&railTop, dc); if(dc.IsFullExplode()) { railTop.ExplodeOrDraw3d(dc); railTop2.ExplodeOrDraw3d(dc); } else { dc.DrawEntity(railTop); dc.DrawEntity(railTop2); } } // 顶层栏杆 if(IsAutoRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=railTop.GetOutline(); DrawRail(polyPath,m_nStepWidth,dc); polyPath=railTop2.GetOutline(); DrawRail(polyPath,m_nStepWidth,dc); } }*/ } return Acad::eOk; } bool TDbCrossStair::IsClipMe(const TEntityBase* pEnt)const { if(TDbEntity::IsClipMe(pEnt)) return true; if(pEnt->GetMe()->isKindOf(TDbColumn::desc())) return true; return false; } Acad::ErrorStatus TDbCrossStair::ExplodeOrDraw2d(XExplodeDraw &dc) const { if(m_nViewCtrl==2) return Acad::eOk; //二维被禁止 if (m_nStepNum<2) { return Acad::eOk; } assertReadEnabled(); CString s1=dc.Desc(),s2=XAcGiViewDraw::Descriptor(); if(_tcscmp(dc.Desc(), XAcGiViewDraw::Descriptor())==0 || g_bOsnapExpl) { XPushMemVar bExpl(g_bOsnapExpl, FALSE); XPushMemVar bFull(XExplodeStream::m_bFullExplode, TRUE); AcDbVoidPtrArray entSet; XExplodeStream dcExp(entSet); dcExp.SetPropertiesFrom(this); ExplodeOrDraw2d(dcExp); INT_PTR nQuickMarker=GetQuickMarker(); int nGsMarker=1; int nCount=entSet.length(); for(int i=0; i 0 && nSectStepNum_DIST_SNAP) { dLen=width*tan(m_dSectRotation); } else { return FALSE; } if((len+fabs(dLen)+m_nStepWidth/3.0 )>length ||(len-fabs(dLen)-m_nStepWidth/3.0 )<_DIST_SNAP) //剖断线转角过大，不能与梯段两边都相交 { double dist=(len_DIST_SNAP) { dLen=dist; } else { dLen=-dist; } } double nStairHeight1=GetStepNum()*GetStepHeight(); //梯高 lSectPos=(len-dLen)/length; rSectPos=(len+dLen)/length; XPointDir2d pt; cvLeft1.Polar(len-dLen, pt); ptLeft2d=pt; cvRight1.Polar(len+dLen, pt); ptRight2d=pt; XDirectionCurve cvLeft2,cvRight2; cvLeft2=stair2.GetSideCurve2d(0); cvRight2=stair2.GetSideCurve2d(1); cvLeft2.Polar(len-dLen, pt); ptLeft2d2=pt; cvRight2.Polar(len+dLen, pt); ptRight2d2=pt; return TRUE; } // 由平面二维点推算剖切步数 int TDbCrossStair::HitSectPosByPoint2d(XPoint ptHit2d) const { if (m_nStepNum<2) { return 0; } TDbLineStair stair1, stair2; TDbSlab slab,slab2; TDbHandRail rail, rail2; ExplodeTo(stair1, stair2, slab, slab2, rail, rail2); XDirectionCurve cvLeft1=stair1.GetSideCurve2d(0); XDirectionCurve cvRight1=stair1.GetSideCurve2d(1); XPoly2D poly1(1); poly1.AppendNode(cvLeft1.StartPoint()); poly1.AppendNode(cvRight1.StartPoint()); poly1.AppendNode(cvRight1.EndPoint()); poly1.AppendNode(cvLeft1.EndPoint()); ptHit2d.z=0; int nPosHit=-1; if((ptHit2d&poly1)!=PR_OUTSIDE) { if(!(m_nStairFlag==SF_TOP&&m_nSideFlag==2)) { XPoint ptPrj; cvLeft1.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft1.StartPoint())/m_nStepWidth); nPosHit += 1; } } else { XDirectionCurve cvLeft2=stair2.GetSideCurve2d(0); XDirectionCurve cvRight2=stair2.GetSideCurve2d(1); XPoly2D poly2(1); poly2.AppendNode(cvLeft2.StartPoint()); poly2.AppendNode(cvRight2.StartPoint()); poly2.AppendNode(cvRight2.EndPoint()); poly2.AppendNode(cvLeft2.EndPoint()); if((ptHit2d&poly2)!=PR_OUTSIDE) { if(!(m_nStairFlag==SF_TOP&&m_nSideFlag==1)) { XPoint ptPrj; cvLeft2.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft2.StartPoint())/m_nStepWidth); nPosHit += 1; } } } return nPosHit; } double TDbCrossStair::GetTextHeight()const { assertReadEnabled(); return m_dTextHeight; } void TDbCrossStair::SetTextHeight(double h) { assertWriteEnabled(); m_dTextHeight=h; } Adesk::UInt8 TDbCrossStair::GetStepNum() const { assertReadEnabled(); return m_nStepNum; } double TDbCrossStair::GetStepHeight() const { assertReadEnabled(); return m_nStepHeight; } void TDbCrossStair::SetStepNum(Adesk::UInt8 n) { assertWriteEnabled(); m_nStepNum=n; } double TDbCrossStair::GetSlabSize() const { assertReadEnabled(); return m_nSlabSize; } double TDbCrossStair::GetSlabSizeUR() const { assertReadEnabled(); return m_nSlabSizeUR; } double TDbCrossStair::GetSlabSizeLR() const { assertReadEnabled(); return m_nSlabSizeLR; } double TDbCrossStair::GetRailHeight() const { assertReadEnabled(); return m_nRailHeight; } double TDbCrossStair::GetRailWidth() const { assertReadEnabled(); return m_nRailWidth; } double TDbCrossStair::GetRailDistToSide() const { assertReadEnabled(); return m_nRailDistToSide; } double TDbCrossStair::GetRailDist() const { assertReadEnabled(); return m_nRailDist; } double TDbCrossStair::GetSpaceWidth() const { assertReadEnabled(); return m_nSpaceWidth; } double TDbCrossStair::GetStairWidth() const { assertReadEnabled(); return m_nStairWidth; } double TDbCrossStair::GetStepWidth() const { assertReadEnabled(); return m_nStepWidth; } Adesk::UInt8 TDbCrossStair::GetStairFlag() const { assertReadEnabled(); return m_nStairFlag; } int TDbCrossStair::GetSectStepNum()const { assertReadEnabled(); return m_nSectStepNum; } double TDbCrossStair::GetElevation() const { assertReadEnabled(); return m_ptLocation.z; } XPoint TDbCrossStair::GetLocation() const { assertReadEnabled(); return m_ptLocation; } double TDbCrossStair::GetRotation() const { assertReadEnabled(); return m_nRotation; } int TDbCrossStair::GetStartSide() const { assertReadEnabled(); return m_nStartSide; } int TDbCrossStair::GetSideFlag() const { assertReadEnabled(); return m_nSideFlag; } XPoint TDbCrossStair::GetUpRight2d() const { assertReadEnabled(); XPoint pt=GetUpLeft2d(); ads_polar(XPoint(pt), m_nRotation, m_nSpaceWidth, pt); return pt; } XPoint TDbCrossStair::GetUpLeft2d() const { assertReadEnabled(); XPoint pt=m_ptLocation; pt.z=0; return pt; } void TDbCrossStair::SetSlabSize(double s) { assertWriteEnabled(); m_nSlabSize=s; } void TDbCrossStair::SetSlabSizeUR(double s) { assertWriteEnabled(); m_nSlabSizeUR=s; } void TDbCrossStair::SetSlabSizeLR(double s) { assertWriteEnabled(); m_nSlabSizeLR=s; } void TDbCrossStair::SetRailHeight(double l) { assertWriteEnabled(); m_nRailHeight=l; } void TDbCrossStair::SetRailWidth(double w) { assertWriteEnabled(); m_nRailWidth=w; } void TDbCrossStair::SetRailDistToSide(double l) { assertWriteEnabled(); m_nRailDistToSide=l; } void TDbCrossStair::SetRailDist(double l) { assertWriteEnabled(); m_nRailDist=l; } void TDbCrossStair::SetStairFlag(Adesk::UInt8 flag) { assertWriteEnabled(); m_nStairFlag=flag; } void TDbCrossStair::SetSpaceWidth(double w) { assertWriteEnabled(); m_nSpaceWidth=w; } void TDbCrossStair::SetStepWidth(double w) { assertWriteEnabled(); m_nStepWidth=w; } void TDbCrossStair::SetStairWidth(double w) { assertWriteEnabled(); m_nStairWidth=w; } void TDbCrossStair::SetElevation(double elev) { assertWriteEnabled(); m_ptLocation.z = elev; } void TDbCrossStair::SetLocation(const XPoint &pt) { assertWriteEnabled(); m_ptLocation = pt; } void TDbCrossStair::SetRotation(double rot) { assertWriteEnabled(); m_nRotation=rot; } void TDbCrossStair::SetStartSide(int nSide) { assertWriteEnabled(); m_nStartSide=nSide; } void TDbCrossStair::SetSideFlag(Adesk::UInt8 flag) { assertWriteEnabled(); m_nSideFlag=flag; } void TDbCrossStair::SetStepHeight(double h) { assertWriteEnabled(); m_nStepHeight=h; } void TDbCrossStair::SetArrow(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx|=SFEX_ARROW; else m_nFlagEx&=~SFEX_ARROW; } BOOL TDbCrossStair::IsArrow() const { return ((m_nFlagEx&SFEX_ARROW)!=0); } BOOL TDbCrossStair::IsAutoOutRail() const { return ((m_nFlagEx&SFEX_AUTOOUTRAIL)!=0); } BOOL TDbCrossStair::IsAutoRail() const { return ((m_nFlagEx&SFEX_AUTORAIL)!=0); } BOOL TDbCrossStair::IsOutRail()const { return (m_nFlagEx&SFEX_OUTRAIL)!=0; } void TDbCrossStair::SetOutRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx|=SFEX_OUTRAIL; else m_nFlagEx&=~SFEX_OUTRAIL; } BOOL TDbCrossStair::IsInRail()const { return (m_nFlagEx&SFEX_INRAIL)!=0; } void TDbCrossStair::SetInRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx|=SFEX_INRAIL; else m_nFlagEx&=~SFEX_INRAIL; } BOOL TDbCrossStair::IsArcPlatform() const { return ((m_nFlagEx&SFEX_ARCPLAT)!=0); } BOOL TDbCrossStair::HasSideBeam(int nSide) const { int nBitFlag=nSide? SFEX_RBEAM : SFEX_LBEAM; return ((m_nFlagEx&nBitFlag)!=0); } BOOL TDbCrossStair::IsAscent() const { return ((m_nFlagEx&SFEX_ASCENT)!=0); } BOOL TDbCrossStair::IsOnGround() const { return ((m_nFlagEx&SFEX_GROUND)!=0); } BOOL TDbCrossStair::HasSlant() const { return ((m_nFlagEx&SFEX_SLANT)!=0); } void TDbCrossStair::SetAutoOutRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_AUTOOUTRAIL; else m_nFlagEx &= ~SFEX_AUTOOUTRAIL; } void TDbCrossStair::SetAutoRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_AUTORAIL; else m_nFlagEx &= ~SFEX_AUTORAIL; } void TDbCrossStair::SetAscent(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_ASCENT; else m_nFlagEx &= ~SFEX_ASCENT; } void TDbCrossStair::SetOnGround(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_GROUND; else m_nFlagEx &= ~SFEX_GROUND; } void TDbCrossStair::SetSlant(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_SLANT; else m_nFlagEx &= ~SFEX_SLANT; } void TDbCrossStair::SetArcPlatform(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_ARCPLAT; else m_nFlagEx &= ~SFEX_ARCPLAT; } void TDbCrossStair::SetSideBeam(int nSide, BOOL bTrue) { assertWriteEnabled(); int nBitFlag=nSide? SFEX_RBEAM : SFEX_LBEAM; if(bTrue) m_nFlagEx |= nBitFlag; else m_nFlagEx &= ~nBitFlag; } double TDbCrossStair::GetBeamHeight() const { return m_nBeamHeight; } double TDbCrossStair::GetBeamThick() const { return m_nBeamThick; } double TDbCrossStair::GetSlabThick() const { return m_nSlabThick; } AcDbObjectId TDbCrossStair::GetLayerBeam3d() const { return m_idLayerBeam3d; } AcDbObjectId TDbCrossStair::GetLayerStep3d() const { return m_idLayerStep3d; } AcDbObjectId TDbCrossStair::GetLayerHand3d() const { return m_idLayerHand3d; } AcDbObjectId TDbCrossStair::GetLayerRail3d() const { return m_idLayerRail3d; } AcDbObjectId TDbCrossStair::GetLayerText() const { return m_idLayerText; } AcDbObjectId TDbCrossStair::GetTextStyle() const { return m_idTextStyle; } AcDbObjectId TDbCrossStair::GetLayerArrow() const { return m_idLayerArrow; } void TDbCrossStair::SetBeamHeight(double val) { assertWriteEnabled(); m_nBeamHeight = val; } void TDbCrossStair::SetSlabThick(double val) { assertWriteEnabled(); m_nSlabThick=val; } void TDbCrossStair::SetBeamThick(double val) { assertWriteEnabled(); m_nBeamThick=val; } void TDbCrossStair::SetLayerBeam3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerBeam3d=idLayer; } void TDbCrossStair::SetLayerStep3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerStep3d=idLayer; } void TDbCrossStair::SetLayerHand3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerHand3d=idLayer; } void TDbCrossStair::SetLayerRail3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerRail3d=idLayer; } void TDbCrossStair::SetLayerText(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerText=idLayer; } void TDbCrossStair::SetTextStyle(AcDbObjectId idStyle) { assertWriteEnabled(); m_idTextStyle=idStyle; } void TDbCrossStair::SetLayerArrow(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerArrow=idLayer; } void TDbCrossStair::SetSectStepNum(int n) { assertWriteEnabled(); m_nSectStepNum=n; } double TDbCrossStair::GetSectRotation()const { return m_dSectRotation; } void TDbCrossStair::SetSectRotation(double r) { assertWriteEnabled(); m_dSectRotation=r; } //add by xlc 090426，箭头文字，动态数据 CString TDbCrossStair::GetTextUp() const { assertReadEnabled(); CString sVal(_T("上")); const TEntityFields &fd = GetFields(); fd.GFD(_T("上楼箭头文字"), sVal); return sVal; } void TDbCrossStair::SetTextUp(const TCHAR *sVal) { assertWriteEnabled(); TEntityFields &fd = Fields(); fd.SFD(_T("上楼箭头文字"), sVal); } CString TDbCrossStair::GetTextDown() const { assertReadEnabled(); CString sVal(_T("下")); const TEntityFields &fd = GetFields(); fd.GFD(_T("下楼箭头文字"), sVal); return sVal; } void TDbCrossStair::SetTextDown(const TCHAR *sVal) { assertWriteEnabled(); TEntityFields &fd = Fields(); fd.SFD(_T("下楼箭头文字"), sVal); } // sg add 101115，支持统一标高 bool TDbCrossStair::UnifyElevation(double dElevation) { assertWriteEnabled(); SetElevation(dElevation); return true; } // cet 2013.9.5 add CString TDbCrossStair::GetXml(const AcGeMatrix3d& mat) const { CString sXml; AcDbVoidPtrArray arrEnts; explode(arrEnts); int nSize = arrEnts.length(); for (int i = 0; i < nSize; ++i) { AcDbEntity *pEnt = (AcDbEntity*)arrEnts[i]; if (pEnt == NULL) { continue; } TDbLineStair *pLineStair = TDbLineStair::cast(pEnt); if (pLineStair != NULL) { sXml += pLineStair->GetXml(mat); continue; } TDbSlab *pSlab = TDbSlab::cast(pEnt); if (pSlab != NULL) { sXml += pSlab->GetXml(mat); } } ReleaseEntSet(arrEnts); return sXml; } ///////////////////////////////////////////////////////////////////////////// void InitDbCrossStair(BOOL bTrue) { if(bTrue) { TDbCrossStair::rxInit(); acrxBuildClassHierarchy(); TDbCrossStair::InitMatchProtocol(TRUE); } else { TDbCrossStair::InitMatchProtocol(FALSE); deleteAcRxClass(TDbCrossStair::desc()); } }