#ifndef _TEImpCabletry_H__
#define _TEImpCabletry_H__

#if _MSC_VER > 1000
#pragma once
#endif

#ifndef  _TDBIMPPIPEBASE_H__
#include "TDbImpPipeBase.h"
#endif

#include <vector>

class TDbPipeBase;
class TEImpCabletry : public TDbImpPipeBase  
{
public:
			 TEImpCabletry();
			 TEImpCabletry(TDbPipeBase* pOwner);
	virtual ~TEImpCabletry();

	// 接口更改通知
	virtual BOOL NotifyInterfaceToModify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);

	virtual TDb::Position ExplainGripIndex(int nIndex) const;
	
	virtual void UpdateNormal(const AcGePoint3d& ptOld,const AcGePoint3d& ptNew);

	virtual void GetTips(CMapStringToString& mapLable2Tip) const;

public:
	//{{AFX_ARX_METHODS(TDbPipeBase)
	virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &mode) const;
    virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &mode) const;
	virtual Acad::ErrorStatus transformBy(const AcGeMatrix3d& xform);
	virtual Acad::ErrorStatus moveGripPointsAt(const AcDbIntArray& indices,
	                                           const AcGeVector3d& offset);
	virtual Acad::ErrorStatus getGripPoints(AcGePoint3dArray& gripPoints,
	                                        AcDbIntArray& osnapModes,
	                                        AcDbIntArray& geomIds) const;
	virtual Acad::ErrorStatus getOsnapPoints(AcDb::OsnapMode osnapMode,
	                                     INT_PTR gsSelectionMark,
	                                     const AcGePoint3d& pickPoint,
	                                     const AcGePoint3d& lastPoint,
	                                     const AcGeMatrix3d& viewXform,
	                                     AcGePoint3dArray& snapPoints,
	                                     AcDbIntArray& geomIds) const;
	virtual Acad::ErrorStatus getClassID(CLSID* pClsid) const;
	virtual Acad::ErrorStatus intersectWith(const AcDbEntity* pEnt,
										AcDb::Intersect intType,
										const AcGePlane& projPlane,
										AcGePoint3dArray& points,
										INT_PTR thisGsMarker = 0,
										INT_PTR otherGsMarker = 0) const;
	virtual Acad::ErrorStatus intersectWith(const AcDbEntity* pEnt,
										AcDb::Intersect intType,
										AcGePoint3dArray& points,
										INT_PTR thisGsMarker = 0,
										INT_PTR otherGsMarker = 0) const;
	virtual void list() const;
	virtual CString GetXml() const;
	virtual CString GetXml(const AcGeMatrix3d& mat) const;

	// add by 2011.02.21 剖切功能 注意 GetSection内不应将std::vector<TObjSectionRecord>参数清空
	virtual bool GetSection(const AcDbFace &face, const AcGeVector3d &vtPlaneSecDir, 
		std::vector<TObjSectionRecord> &sectionRecord, AcDbVoidPtrArray& arFillPtrs) const;

	// 剖切用，返回Z坐标最高、最低点
	virtual Acad::ErrorStatus GetExtents(TADSGePoint3d &ptLow, TADSGePoint3d &ptUp) const;
	//}}AFX_ARX_METHODS
			
public:
	
	virtual BOOL MakeCurves(TComplexCurve& cplCurve) const;
	
	virtual BOOL GetCurvesInSide(TComplexCurve& compCurve) const;

	virtual AcDbPolyline* MakePolyCurve() const;
	
	virtual BOOL MakePolyCurveFaces(AcDbVoidPtrArray& arFaces);

	virtual BOOL NoneConectLineIfNeed(TComplexCurve& cplCurve) const;
	
	//获取三维的壳对象
	virtual int GetXBaseShell(TXShell& xShell);
	
	//获取体的范围方块
	virtual int GetBodyBox(AcDbExtents& ext);

	//获取弧形桥架在指定点上的隔板方向
	void GetClapDirByPt(const AcGePoint3d& pt,AcGeVector3d& vtDir);
	
	//add by axc 2013.6.28 封装剖切面辐射电缆显示函数
	void GetCirCenter(std::vector<double> &vecRadius,std::vector<AcGePoint3d> &vecCenter,double &dCableWidth) const;
	//add by axc 2013.7.15 增加敷设电缆拟合函数
	void TEImpCabletry::FittingCircle(std::vector<AcGePoint3d> &vecpt3d/*拟合圆的点*/,double &dRadius
		,AcGePoint3d &ptCenter/*投影点圆心 */) const;

private:

	BOOL OnTransformMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);

	BOOL OnMoveGripPointMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);

	BOOL MakeSeglineCurEls(AcGePoint3d& ptGe3,AcGePoint3d& ptGe2,AcGeVector3d& vtLine,TComplexCurve& cplCurve) const;

	BOOL MakeArcSegLineCurEls(AcGeCircArc3d& arcMid,const double& dWidth,TComplexCurve& cplCurve) const;
	
	BOOL GetIndexOfPointIsOn(TComplexCurve& cplCurv,const AcGePoint3d& ptOn,int& nIndex) const;

	CString GetCurrentTypeName() const;
	
	// 判断实体是否为桥架
	BOOL MakesureIsPipe(const AcDbObjectId& id) const;
	// 首尾标高不同添加线段
	void AddArrowLinesWhenDifEl(TComplexCurve& compCurve) const;
	// 绘制电缆沟
	BOOL MakeCurvesOfCableGouge(TComplexCurve& cplCurve) const;
	// 单边
	BOOL MakeCurvesOfCableGougeSide(TComplexCurve& cplCurve) const;
	// 双边对立
	BOOL MakeCurvesOfCableGougeOrder(TComplexCurve& cplCurve) const;
	// 双边交错
	BOOL MakeCurvesOfCableGougeInter(TComplexCurve& cplCurve) const;
	// tsj Add2009.7.14
	// 获取垂足点
	BOOL GetVerticalFootPoint(const AcGePoint3d& pickPoint,const AcGePoint3d& lastPoint,AcGePoint3d& ptVerFoot) const;
	// 获取最近点
	BOOL GetNearestPoint(const AcGePoint3d& pickPoint,AcGePoint3d& ptNear) const;
	// 获取中心线
	BOOL GetCableMidLine(TComplexCurve& compCurve) const;

	// 盘式桥架
	Acad::ErrorStatus ExplodeOrDraw3dOfP(XExplodeDraw &mode) const;
	
	// 槽式桥架
	Acad::ErrorStatus ExplodeOrDraw3dOfC(XExplodeDraw &mode) const;
	//槽式弧形桥架
	Acad::ErrorStatus ExplodeOrDrawArc3dOfC(XExplodeDraw &mode) const;
	
	// 梯式桥架
	Acad::ErrorStatus ExplodeOrDraw3dOfT(XExplodeDraw &mode) const;
	//梯式弧形桥架  lsd 2013-11-1
	Acad::ErrorStatus ExplodeOrDrawArc3dOfT(XExplodeDraw &mode) const;
	//梯式弧形桥架段
	Acad::ErrorStatus DrawArcSectT(XExplodeDraw &mode,const AcGePoint3d& ptS,const AcGePoint3d& ptE,const AcGePoint3d& ptCenter,const AcGeVector3d& vtNor,double dW,double dH,BOOL bCover) const;
	//绘制长方体
	void DrawCube(XExplodeDraw &mode,const AcGeVector3d &vtDir, const std::vector<AcGePoint3d> &pVerList, double dThick) const;
	Acad::ErrorStatus DrawArcSect(XExplodeDraw &mode,const AcGePoint3d& ptS,const AcGePoint3d& ptE,const AcGePoint3d& ptCenter,
					const AcGeVector3d& vtNor,double dW,double dH,BOOL bCover = FALSE) const;

	void ModyfyClapVector(const AcGeVector3d& vtOld,const AcGeVector3d& vtNew);

	//弧形桥架
	BOOL GetArcCurvesInSide(TComplexCurve& compCurve) const;
	BOOL MakeArcCurves(TComplexCurve& compCurve) const;
	
	
	//add by bsl 增加移动方向控制,如果 2端控件 主方向不平行，则返回false
	BOOL GetMoveDirect(AcGeVector3d& vtDir);

};

#endif //_TEImpCabletry_H__