#ifndef __TEImpCabReducer_H__
#define __TEImpCabReducer_H__

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

#include "TImpSpecFitting.h"

class TEImpCabReducer : public TImpSpecFitting
{
public:
	TEImpCabReducer();
	virtual ~TEImpCabReducer();
	
public:
	
	// 接口描述对象
	virtual BOOL GetInterface(int nIndex,TInterface& pipeInterface) const;	
	virtual BOOL GetInterface(const AcGePoint3d& ptCon,TInterface& pipeInterface) const;
	
	virtual BOOL HasInterface(const AcGePoint3d& ptCon,const AcGeVector3d& vtDir);
	virtual int	 GetInterfaceCount() const;
	
	// 建立接口关联关系
	virtual BOOL SetInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect);
	
	// 移除接口关联关系
	virtual BOOL RemoveInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect);
	
	// 接口更改通知
	virtual BOOL NotifyInterfaceToModify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	virtual TDb::Position ExplainGripIndex(int nIndex) const;

	virtual void GetKindName(CString& sName);

public:

	virtual BOOL GetCurvesInSide(TComplexCurve& compCurve) const;
	
	virtual BOOL MakePolyCurveFaces(AcDbVoidPtrArray& arFaces);

	virtual BOOL MakeCurves(TComplexCurve& cplCurve) const;

	BOOL NoneConectLineIfNeed(TComplexCurve& cplCurve) const;
	
	virtual AcDbPolyline* MakePolyCurve() const;
	
	virtual void GetTips(CMapStringToString& mapLable2Tip) const;
	
	//获取三维的壳对象
	virtual int GetXBaseShell(TXShell& xShell);
	
	//获取体的范围方块
	virtual int GetBodyBox(AcDbExtents& ext);

	virtual CString GetXml() const;
	virtual CString GetXml(const AcGeMatrix3d& mat) const;
	// add by 2011.02.21 剖切功能 注意 GetSection内不应将std::vector<TObjSectionRecord>参数清空
	virtual bool GetSection(const AcDbFace &face, const AcGeVector3d &vtPlaneSecDir, 
		std::vector<TObjSectionRecord> &sectionRecord, AcDbVoidPtrArray& arFillPtrs) const;

	// 剖切用，返回Z坐标最高、最低点
	virtual Acad::ErrorStatus GetExtents(TADSGePoint3d &ptLow, TADSGePoint3d &ptUp) const;
public:
	//{{AFX_ARX_METHODS(TEImpCabReducer)
	virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &mode) const;
    virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &mode) const;
	virtual Acad::ErrorStatus getGripPoints(AcGePoint3dArray& gripPoints,
											AcDbIntArray& osnapModes,
											AcDbIntArray& geomIds) const;
	virtual Acad::ErrorStatus moveGripPointsAt(const AcDbIntArray& indices,
												const AcGeVector3d& offset);
	virtual Acad::ErrorStatus transformBy(const AcGeMatrix3d& xform);
	virtual Acad::ErrorStatus getOsnapPoints(AcDb::OsnapMode osnapMode,
											INT_PTR gsSelectionMark,
											const AcGePoint3d& pickPoint,
											const AcGePoint3d& lastPoint,
											const AcGeMatrix3d& viewXform,
											AcGePoint3dArray& snapPoints,
											AcDbIntArray& geomIds) const;
	virtual void list() const;
	virtual Acad::ErrorStatus getClassID(CLSID* pClsid) const;
	//}}AFX_ARX_METHODS
		
protected:
	static void FreeBuffer(AcDbVoidPtrArray& arCurves);
	
	BOOL OnMoveGripPointMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	BOOL OnTransformByMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	BOOL OnSizeMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
private:
	// 槽式下平异径接头的夹点移动动作
	Acad::ErrorStatus OnBottomHorDifRMoveGripPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset);
	// 获取垂足点
	BOOL GetVerticalFootPoint(const AcGePoint3d& pickPoint,
							const AcGePoint3d& lastPoint,
							AcGePoint3d& ptVerFoot) const;
	//获取中心线
	BOOL GetReducerMidLine(TComplexCurve& compCurve) const;
	// 获取最近点
	BOOL GetNearestPoint(const AcGePoint3d& pickPoint,
						AcGePoint3d& ptNear) const;
	// 判断当前视口是否为3d
	BOOL EnsureCurViewPortIs3D(const AcGeVector3d& vtNormal) const;
	// 槽式下平异径3d
	BOOL ExplodeOrDraw3dDifR(XExplodeDraw &mode) const;
	// 槽式下平普通异径3d
	BOOL ExplodeOrDraw3dNorDifR(XExplodeDraw &mode) const;
	// 槽式下平偏移异径3d
	BOOL ExplodeOrDraw3dOffDifR(XExplodeDraw &mode) const;
	// 槽式下平异径2d
	void MakeCurvesOfHorDifR2D(TComplexCurve& cplCurve,int& nNum) const;
	// 槽式下平普通异径2d
	void MakeCurvesOfHorNorDifR2D(TComplexCurve& cplCurve,int& nNum) const;
	// 槽式下平偏移异径2d
	void MakeCurvesOfHorOffDifR2D(TComplexCurve& cplCurve,int& nNum) const;
	
	// makepolyface
	void MakePolyCurveFacesOfBHDifR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBHDifRZNor(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBHDifRNoZNor(AcDbVoidPtrArray& arFaces);
	
	void MakePolyCurveFacesOfNorDifR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfNorDifRZNor(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfNorDifRNoZNor(AcDbVoidPtrArray& arFaces);

	void MakePolyCurveFacesOfOffDifR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfOffDifRZNor(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfOffDifRNoZNor(AcDbVoidPtrArray& arFaces);

	//MakePolyCurve
	void MakePolyCurveOfBHDifR(AcDbPolyline*& pPl) const;
	void MakePolyCurveOfNorDifR(AcDbPolyline*& pPl) const;
	void MakePolyCurveOfOffDifR(AcDbPolyline*& pPl) const;

	void FormatPolyline(AcDbPolyline*& pPl,TComplexCurve& cplCurve,int nNum) const;
	AcDbFace* CreateAcDbFace(const AcGePoint3d& pt1,const AcGePoint3d& pt2,const AcGePoint3d& pt3,const AcGePoint3d& pt4);
	BOOL GetIndexOfPointIsOn(TComplexCurve& cplCurv,const AcGePoint3d& ptOn,int& nIndex) const;

	CString GetCurrentTypeName() const;

	//通过点得到最大范围
	int GetBoxExtendByPts(const AcGePoint3dArray &arPts,AcDbExtents& ext);
	//获取外壳
	int GetXBaseShellNorDifR(TXShell& xShell);
	int GetXBaseShellOffDifR(TXShell& xShell);

	//获取体的范围方块
	int GetBodyBoxNorDifR(AcDbExtents& ext);
	int GetBodyBoxOffDifR(AcDbExtents& ext);

	Acad::ErrorStatus ExplodeOrDraw3dOfC(XExplodeDraw &mode) const;
	
	Acad::ErrorStatus ExplodeOrDraw3dOfT(XExplodeDraw &mode) const;
	
	Acad::ErrorStatus ExplodeOrDraw3dOfP(XExplodeDraw &mode) const;
	
	BOOL ExplodeOrDraw3dOffDifROfT(XExplodeDraw &mode) const;
	
	BOOL ExplodeOrDraw3dNorDifROfT(XExplodeDraw &mode) const;
	
	void DrawCube(XExplodeDraw &mode,const AcGeVector3d &vtDir, const AcGePoint3dArray &ptArr, double dThick) const;
};
#endif // __TEImpCabReducer_H__