#ifndef _TEIMPCABOFFSET_H__ 
#define _TEIMPCABOFFSET_H__

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

#include "TImpSpecFitting.h"

class TEImpCabOffset : public TImpSpecFitting  
{
public:
			 TEImpCabOffset();
	virtual ~TEImpCabOffset();

public:
	
	// 接口描述对象
	virtual BOOL GetInterface(int nIndex,TInterface& pipeInterface) const;	
	virtual BOOL GetInterface(const AcGePoint3d& ptCon,TInterface& pipeInterface) const;
	
	virtual BOOL HasInterface(const AcGePoint3d& ptCon,const AcGeVector3d& vtDir);
	virtual int	 GetInterfaceCount() const;
	
	// 建立接口关联关系
	virtual BOOL SetInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect);
	
	// 移除接口关联关系
	virtual BOOL RemoveInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect);
	
	// 接口更改通知
	virtual BOOL NotifyInterfaceToModify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	virtual TDb::Position ExplainGripIndex(int nIndex) const;
	
	virtual void GetKindName(CString& sName);
	
public:
	virtual BOOL GetCurvesInSide(TComplexCurve& compCurve) const;
	
	virtual BOOL MakePolyCurveFaces(AcDbVoidPtrArray& arFaces);
	
	//连接线根据需要去掉
	virtual BOOL NoneConectLineIfNeed(TComplexCurve& cplCurve) const;
	
	virtual BOOL MakeCurves(TComplexCurve& cplCurve) const;
	
	virtual AcDbPolyline* MakePolyCurve() const;
	
	virtual void GetTips(CMapStringToString& mapLable2Tip) const;

	//获取三维的壳对象
	virtual int GetXBaseShell(TXShell& xShell);
	
	//获取体的范围方块
	virtual int GetBodyBox(AcDbExtents& ext);

	//左偏乙字弯
	int MakeHorLeftOffsetShell(TXShell& xShell) const;

	//右偏乙字弯
	int  MakeHorRightOffsetShell(TXShell& xShell) const;

	//垂直乙字弯
	int  MakeVerOffsetShell(TXShell& xShell) const;

	int GetBodyBoxHorLeftOffsetShell(AcDbExtents& ext);

	int GetBodyBoxHorRightOffsetShell(AcDbExtents& ext);

	int GetBodyBoxVerOffsetShell(AcDbExtents& ext);

	void AppendAcDbExtents(std::vector<AcGePoint3d>& vctpt,AcDbExtents& ext);
	// add by 2011.02.21 剖切功能 注意 GetSection内不应将std::vector<TObjSectionRecord>参数清空
	virtual bool GetSection(const AcDbFace &face, const AcGeVector3d &vtPlaneSecDir, 
		std::vector<TObjSectionRecord> &sectionRecord, AcDbVoidPtrArray& arFillPtrs) const;

	// 剖切用，返回Z坐标最高、最低点
	virtual Acad::ErrorStatus GetExtents(TADSGePoint3d &ptLow, TADSGePoint3d &ptUp) const;
	
public:
	//{{AFX_ARX_METHODS(TEImpCabElbow)
	virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &mode) const;
    virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &mode) const;
	virtual Acad::ErrorStatus transformBy(const AcGeMatrix3d& xform);
	virtual Acad::ErrorStatus moveStretchPointsAt(const AcDbIntArray& indices,
		const AcGeVector3d& offset);
	virtual Acad::ErrorStatus moveGripPointsAt(const AcDbIntArray& indices,
		const AcGeVector3d& offset);
	virtual Acad::ErrorStatus getStretchPoints(AcGePoint3dArray& stretchPoints) const;
	virtual Acad::ErrorStatus getGripPoints(AcGePoint3dArray& gripPoints,
		AcDbIntArray& osnapModes,
		AcDbIntArray& geomIds) const;
	virtual Acad::ErrorStatus getOsnapPoints(AcDb::OsnapMode osnapMode,
		INT_PTR gsSelectionMark,
		const AcGePoint3d& pickPoint,
		const AcGePoint3d& lastPoint,
		const AcGeMatrix3d& viewXform,
		AcGePoint3dArray& snapPoints,
		AcDbIntArray& geomIds) const;	
	virtual void list() const;
	virtual CString GetXml() const;
	virtual CString GetXml(const AcGeMatrix3d& mat) const;
	virtual Acad::ErrorStatus getClassID(CLSID* pClsid) const;
	//}}AFX_ARX_METHODS

private:
	//左偏乙字弯
	BOOL  MakeHorLeftOffsetCurves(TComplexCurve& cplCurve) const;
	//右偏乙字弯
	BOOL  MakeHorRightOffsetCurves(TComplexCurve& cplCurve) const;
	//垂直乙字弯
	BOOL  MakeVerOffsetCurves(TComplexCurve& cplCurve) const;

	//生成完整的CURVE
	BOOL  MakeBaseCurves(TComplexCurve& cplCurve) const;
	
	
	BOOL OnMoveGripPointMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	BOOL OnTransformByMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	BOOL OnSizeMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);

	CString GetCurrentTypeName() const;

	//获取中心线
	BOOL GetOffsetMidLine(TComplexCurve& compCurve) const;
	// 获取垂足点
	BOOL GetVerticalFootPoint(const AcGePoint3d& pickPoint,const AcGePoint3d& lastPoint,AcGePoint3d& ptVerFoot) const;
	// 获取最近点
	BOOL GetNearestPoint(const AcGePoint3d& pickPoint,
						AcGePoint3d& ptNear) const;
	//创建面
	AcDbFace* CreateAcDbFace(const AcGePoint3d& pt1,
		const AcGePoint3d& pt2,
		const AcGePoint3d& pt3,
		const AcGePoint3d& pt4);

	Acad::ErrorStatus ExplodeOrHorLeftDraw3d(XExplodeDraw &mode) const;
	Acad::ErrorStatus ExplodeOrHorRightDraw3d(XExplodeDraw &mode) const;
	Acad::ErrorStatus ExplodeOrVerDraw3d(XExplodeDraw &mode) const;

	// 判断实体是否为桥架
	BOOL MakesureIsPipe(const AcDbObjectId& id) const;
	BOOL GetIndexOfPointIsOn(TComplexCurve& cplCurv,const AcGePoint3d& ptOn,int& nIndex) const;
	AcDbFace* CreateAcDbFace(const AcGePoint3d& pt1,
		const AcGePoint3d& pt2,
		const AcGePoint3d& pt3,
		const AcGePoint3d& pt4) const;

	Acad::ErrorStatus ExplodeOrDraw3dOfC(XExplodeDraw &mode) const;
	
	Acad::ErrorStatus ExplodeOrDraw3dOfP(XExplodeDraw &mode) const;
	
	Acad::ErrorStatus ExplodeOrDraw3dOfT(XExplodeDraw &mode) const;
	
	Acad::ErrorStatus ExplodeOrHorLeftDraw3dOfT(XExplodeDraw &mode) const;
	
	Acad::ErrorStatus ExplodeOrHorRightDraw3dOfT(XExplodeDraw &mode) const;
	
	Acad::ErrorStatus ExplodeOrVerDraw3dOfT(XExplodeDraw &mode) const;
	
	void DrawCube(XExplodeDraw &mode,const AcGeVector3d &vtDir, const AcGePoint3dArray &ptArr, double dThick) const;
};

#endif // !defined(AFX_TEIMPCABOFFSET_H__ADEDE82D_77B4_4792_BC86_BB7887E42797__INCLUDED_)