#include "stdafx.h"
#include "crossstairdlg.h"
#include "resource.h"
#include "tchar.h"


//------------------------交叉楼梯-----------------------
//
int CCrossStairDlg::m_iSelectFloor=1;
int CCrossStairDlg::m_iSectStepNum=10;
CString CCrossStairDlg::m_strRailHeight=_T("900");
CString CCrossStairDlg::m_strRailWidth=_T("60");
CString CCrossStairDlg::m_strRailDistToSide=_T("0");
CString CCrossStairDlg::m_strStepWidth=_T("270");
CString CCrossStairDlg::m_strStairWidth=_T("1200");
CString CCrossStairDlg::m_strSpaceWidth=_T("2560");
CString CCrossStairDlg::m_strStairLength=_T("5400");
BOOL CCrossStairDlg::m_bRailOut=FALSE;
BOOL CCrossStairDlg::m_bHasCellar=FALSE;
BOOL CCrossStairDlg::m_bLeftDown=FALSE;
BOOL CCrossStairDlg::m_bHasOutRoof=FALSE;
BOOL CCrossStairDlg::m_bLeftUp=FALSE;
int CCrossStairDlg::m_iLRDown=0;
BOOL CCrossStairDlg::m_bAutoOutRail=FALSE;
BOOL CCrossStairDlg::m_bSelectUpDir=TRUE;//选择上楼的方向
CString CCrossStairDlg::m_strRailOutDis=_T("0");
BOOL CCrossStairDlg::m_bInsideRail=FALSE;
BOOL CCrossStairDlg::m_bHasInsideHandRail=TRUE;//有内侧扶手
//保留结果
int CCrossStairDlg::m_isaveStepNum=20;
CString CCrossStairDlg::m_strsaveStepHeight=_T("150");
CString CCrossStairDlg::m_strsaveStairHeight=_T("3000");
IMPLEMENT_DYNAMIC(CCrossStairDlg,CBaseStairDlg)
//所有的Radio,CheckButton的处理过程放在UpdateSel中完成
//更新UpdateImage操作
BEGIN_MESSAGE_MAP(CCrossStairDlg,CBaseStairDlg)
	ON_BN_CLICKED(IDC_BSPACE_WIDTH,OnClickSpaceWidth)
	ON_BN_CLICKED(IDC_BSTAIR_WIDTH,OnClickStairWidth)
	ON_BN_CLICKED(IDC_INSIDERAIL,UpdateSel)//内侧栏杆
	//对楼层选择的处理
	ON_CONTROL_RANGE(BN_CLICKED,IDC_RADIO_FIRST,IDC_RADIO_TOP,OnControlRange)
	ON_BN_CLICKED(IDC_HAS_CELLAR,OnClickHasCellar)
	ON_BN_CLICKED(IDC_LEFT_DOWN,OnClickHasCellar)
	ON_BN_CLICKED(IDC_RIGHT_DOWN,OnClickHasCellar)
	ON_BN_CLICKED(IDC_HAS_ROOF,OnClickHasRoof)
	ON_BN_CLICKED(IDC_LEFT_UP,OnClickHasRoof)
	ON_BN_CLICKED(IDC_RIGHT_UP,OnClickHasRoof)
	//选择上楼方向
	ON_BN_CLICKED(IDC_LEFT_UPDIR,UpdateSel)
	ON_BN_CLICKED(IDC_RIGHT_UPDIR,UpdateSel)
	ON_BN_CLICKED(IDC_HAS_ARROW,UpdateSel)
	//落地
	ON_BN_CLICKED(IDC_ON_GROUND,UpdateSel)
	//扶手
	ON_BN_CLICKED(IDC_RAIL_AUTO,UpdateSel)
	ON_BN_CLICKED(IDC_CHECK_HASINSIDERAIL,UpdateSel)//有内侧扶手
	ON_EN_CHANGE(IDC_RAIL_HEIGHT,OnChangeRailHeight)
	ON_EN_CHANGE(IDC_RAIL_WIDTH,OnChangeRailWidth)
	ON_EN_CHANGE(IDC_RAIL_DISTTOSIDE,OnChangeRailDistoSide)
	ON_EN_CHANGE(IDC_RAIL_OUTDIS,OnChangeRailOutDis)
	//坡道
	ON_BN_CLICKED(IDC_HAS_SLANT,UpdateSel)
	//边梁
	ON_BN_CLICKED(IDC_LEFT_BEAM,UpdateSel)
	ON_BN_CLICKED(IDC_RIGHT_BEAM,UpdateSel)
	//事件响应
	ON_EN_CHANGE(IDC_STAIR_HEIGHT,OnChangeStairHeight)
	ON_EN_CHANGE(IDC_STAIR_WIDTH,OnChangeStairWidth)
	ON_EN_CHANGE(IDC_SPACE_WIDTH,OnChangeSpaceWidth)

	ON_EN_CHANGE(IDC_STEP_WIDTH,OnChangeStepWidth)
	ON_EN_CHANGE(IDC_STEP_NUM,OnChangeStepNum)
	ON_EN_CHANGE(IDC_STEP_HEIGHT,OnChangeStepHeight)
	ON_EN_CHANGE(IDC_POUSTEP_NUM,OnChangePouNum)

	ON_CBN_SELCHANGE(IDC_STAIR_HEIGHTCOMBOX,OnSelChangeStairHeightComBox)
	ON_CBN_EDITCHANGE(IDC_STAIR_HEIGHTCOMBOX,OnChangeStairHeightComBox)
	ON_BN_CLICKED(IDC_OUTRAIL,OnClickRailOut)
	//楼层高度失去焦点的操作
	ON_CBN_KILLFOCUS(IDC_STAIR_HEIGHTCOMBOX,OnKFStairHeight)
	//踏步高度失去焦点
	ON_CBN_KILLFOCUS(IDC_STEP_NUM,OnKFStepNum)
	ON_EN_KILLFOCUS(IDC_SPACE_WIDTH,OnKFSpaceWidth)
	ON_EN_KILLFOCUS(IDC_STEP_HEIGHT,OnKFStepHeight)

	ON_EN_KILLFOCUS(IDC_RAIL_HEIGHT,OnKFRailHeight)
	ON_EN_KILLFOCUS(IDC_RAIL_WIDTH,OnKFRailWidth)
	ON_EN_KILLFOCUS(IDC_RAIL_DISTTOSIDE,OnKFRailDistoSide)
	ON_EN_KILLFOCUS(IDC_RAIL_OUTDIS,OnKFRailOutDis)
	ON_EN_KILLFOCUS(IDC_STAIR_WIDTH,OnKFStairWidth)
	ON_EN_KILLFOCUS(IDC_STEP_WIDTH,OnKFStepWidth)
	ON_EN_KILLFOCUS(IDC_POUSTEP_NUM,OnKFPouNum)

	ON_WM_CLOSE()
END_MESSAGE_MAP()
CCrossStairDlg::CCrossStairDlg(CWnd *pParent/* =NULL */):CBaseStairDlg(CCrossStairDlg::IDD, pParent),m_group1(0)
{	
	m_bHasArrow=TRUE;//标注
	m_bGroupStatus=FALSE;//组状态
	//平台长度的初始化
	m_dSlabLength=1200;
	m_dSlabLengthLR=1200;
	m_dSlabLengthUR=1200;
	Exchange(m_nStepNum,m_isaveStepNum);
	Exchange(m_strStepHeight,m_strsaveStepHeight);
	Exchange(m_strStairHeight,m_strsaveStairHeight);
	//初始话
	m_bEdit=FALSE;//处于非编辑状态
	m_pBakObj=NULL;//为空状态
}
CCrossStairDlg::CCrossStairDlg(UINT idd,CWnd *pParent/*=NULL*/):CBaseStairDlg(idd,pParent),m_group1(0)
{
	m_bHasArrow=TRUE;//标注
	m_bGroupStatus=FALSE;//组状态
	//平台长度的初始化
	m_dSlabLength=1200;
	m_dSlabLengthLR=1200;
	m_dSlabLengthUR=1200;
	Exchange(m_nStepNum,m_isaveStepNum);
	Exchange(m_strStepHeight,m_strsaveStepHeight);
	Exchange(m_strStairHeight,m_strsaveStairHeight);
	//初始话
	m_bEdit=FALSE;//处于非编辑状态
	m_pBakObj=NULL;//为空状态
	
}
CCrossStairDlg::~CCrossStairDlg()
{
	Exchange(m_nStepNum,m_isaveStepNum);
	Exchange(m_strStepHeight,m_strsaveStepHeight);
	Exchange(m_strStairHeight,m_strsaveStairHeight);
	delete m_pBakObj;
}
BOOL CCrossStairDlg::OnInitDialog()
{
	CBaseStairDlg::OnInitDialog();
	spin.SetRange(1,m_nStepNum);
	AddTip(IDC_NEED3D);
	AddTip(IDC_NEED2D);
	AddTip(IDC_STAIR_HEIGHT_STATIC,_T("楼梯高度始终等于所有踏步的高度总和，改变楼梯高度将使踏步数变化,同时可能微调踏步高度"));
	AddTip(IDC_STEP_NUM_STATIC,_T("改变踏步数将使踏步高度反向变化"));
	AddTip(IDC_STEP_HEIGHT_STATIC,_T("输入一个大概的近似踏步高度，系统将自动设置正确值；改变踏步高度将引起踏步数反向变化"));
	UpdateSel();
	return TRUE;
}
void CCrossStairDlg::DoDataExchange(CDataExchange* pDX)
{
	CBaseStairDlg::DoDataExchange(pDX);
	DDX_Text(pDX,IDC_POUSTEP_NUM,m_iSectStepNum);
	DDX_Text(pDX,IDC_STEP_WIDTH,m_strStepWidth);
	DDX_Text(pDX,IDC_STAIR_WIDTH,m_strStairWidth);
	DDX_Text(pDX,IDC_RAIL_WIDTH,m_strRailWidth);
	DDX_Text(pDX,IDC_RAIL_DISTTOSIDE,m_strRailDistToSide);
	DDX_Text(pDX,IDC_RAIL_HEIGHT,m_strRailHeight);
	DDX_Text(pDX,IDC_RAIL_OUTDIS,m_strRailOutDis);
	DDX_Text(pDX,IDC_STATIC_WELLWID,m_strStairWellWidth);//梯井宽度
	//楼层的设置
	//楼梯高度的设置
	DDX_CBString(pDX,IDC_STAIR_HEIGHTCOMBOX,m_strStairHeight);
	DDX_Control(pDX,IDC_STAIR_HEIGHTCOMBOX,m_ctrlStairHeight);
	DDX_Radio(pDX,IDC_RADIO_FIRST,m_iSelectFloor);
	DDX_Check(pDX,IDC_HAS_CELLAR,m_bHasCellar);
	DDX_Radio(pDX,IDC_LEFT_DOWN,m_bLeftDown);
	DDX_Check(pDX,IDC_HAS_ROOF,m_bHasOutRoof);
	DDX_Radio(pDX,IDC_LEFT_UP,m_bLeftUp);
	//上楼方向
	DDX_Radio(pDX,IDC_LEFT_UPDIR,m_bSelectUpDir);
	DDX_Check(pDX,IDC_HAS_ARROW,m_bHasArrow);
	//扶手
	DDX_Text(pDX,IDC_RAIL_HEIGHT,m_strRailHeight);
	DDX_Text(pDX,IDC_RAIL_WIDTH,m_strRailWidth);
	DDX_Text(pDX,IDC_RAIL_DISTTOSIDE,m_strRailDistToSide);

	DDX_Control(pDX,IDC_SPIN2,spin);
	DDX_Text(pDX,IDC_STAIR_WIDTH,m_strStairWidth);
	DDX_Text(pDX,IDC_SPACE_WIDTH,m_strSpaceWidth);
	DDX_Text(pDX,IDC_STAIR_LENGTH,m_strStairLength);
	DDX_Check(pDX,IDC_INSIDERAIL,m_bInsideRail);//内侧栏杆
	DDX_Check(pDX,IDC_CHECK_HASINSIDERAIL,m_bHasInsideHandRail);//has inside handrail

	//边梁
	DDX_Check(pDX,IDC_LEFT_BEAM,m_bLeftBeam);
	DDX_Check(pDX,IDC_RIGHT_BEAM,m_bRightBeam);

	DDX_Check(pDX,IDC_OUTRAIL,m_bRailOut);
	DDX_Check(pDX,IDC_RAIL_AUTO,m_bAutoOutRail);//是否自动生成扶手

	DDX_Control(pDX,IDC_GROUP1,m_group1);
	DDX_GroupStatus(pDX,IDC_GROUP1,m_bGroupStatus);

	//是否有剖断
}
void CCrossStairDlg::OnClickSpaceWidth()
{//获取梯间宽的函数
	double dDist=::_tstof(m_strSpaceWidth);
	BeginEditorCommand();
	int nRet=GetDist(_T("\n楼梯间宽度"), dDist, RSG_NOZERO|RSG_NONEG|RSG_2D);
	CompleteEditorCommand();
	if (nRet==RTNORM)
	{
		if (dDist<2.0*_MIN_STAIRWIDTH)
		{
			::AfxMessageBox(_T("梯间宽度不正确"));
			return;
		}
		m_strSpaceWidth.Format(_T("%.2f"),dDist);
		if (dDist<::_tstof(m_strStairWidth)*2)
		{
			m_strStairWidth.Format(_T("%.2f"),_tstof(m_strSpaceWidth)/2);
		}
		m_strStairWellWidth=Dist2Str(::_tstof(m_strSpaceWidth)-2.0*::_tstof(m_strStairWidth));
		UpdateData(FALSE);
		UpdateImage();
	}
	return;
}
void CCrossStairDlg::OnClickStairWidth()
{//获取梯段宽
	double dDist=::_tstof(m_strStairWidth);
	BeginEditorCommand();
	int nRet=GetDist(_T("\n梯段宽度"), dDist, RSG_NOZERO|RSG_NONEG|RSG_2D);
	CompleteEditorCommand();
	if (nRet==RTNORM)
	{
		if (dDist>_tstof(m_strSpaceWidth)*0.5)
		{
			::AfxMessageBox(_T("梯段宽度不正确"));
			return;
		}
		m_strStairWidth.Format(_T("%.2f"),dDist);
		m_strStairWellWidth=Dist2Str(::_tstof(m_strSpaceWidth)-2.0*::_tstof(m_strStairWidth));
		UpdateData(FALSE);
		UpdateImage();
	}
	return;
}
void CCrossStairDlg::Obj2Dlg(const TDbEntity *pStep)
{
	TDbCrossStair *pStair=TDbCrossStair::cast(pStep);
	//  [8/14/2008 nsh]
	//--------------------------------
	m_bEdit=TRUE;
	m_pBakObj=(TDbCrossStair*)(pStair->clone());//专递值
	//--------------------------------
	//VERIFY(pStair);
	//踏步操作
	m_strStepHeight.Format(_T("%.2f"),pStair->GetStepHeight());
	m_strStepWidth=Dist2Str(pStair->GetStepWidth());
	m_nStepNum=pStair->GetStepNum();
	m_strStairWidth=Dist2Str(pStair->GetStairWidth());
	m_strStairHeight=Dist2Str(pStair->GetStairHeight());
	m_strRailDistToSide=Dist2Str(pStair->GetRailDistToSide());
	m_strRailOutDis=Dist2Str(pStair->GetRailDist());
	int iFloor=pStair->GetStairFlag();
	int iSide=pStair->GetSideFlag();
	switch(iFloor)
	{
	case 0:
		{
			m_iSelectFloor=0;
			if (iSide==1){m_bHasCellar=TRUE,m_bLeftDown=FALSE;}
			else if (iSide==2){m_bHasCellar=TRUE,m_bLeftDown=TRUE;}
		}
		break;
	case 1:
		{
			m_iSelectFloor=1;
		}
		break;
	case 2:
		{
			m_iSelectFloor=2;
			if (iSide==1){m_bHasOutRoof=TRUE,m_bLeftUp=FALSE;}
			else if (iSide==2){m_bHasOutRoof=TRUE,m_bLeftUp=TRUE;}
		}
		break;
	default:
		break;
	}
	m_strSpaceWidth=Dist2Str(pStair->GetSpaceWidth());
	m_iSectStepNum=pStair->GetSectStepNum();
	m_bAutoOutRail=pStair->IsAutoOutRail();
	/*m_bLeftBeam=pStair->HasSideBeam(0);
	m_bRightBeam=pStair->HasSideBeam(1);*/
	m_bLeftBeam=pStair->IsInSideBeam();
	m_bRightBeam=pStair->IsOutSideBeam();

	m_bSelectUpDir=pStair->GetStartSide();
	m_bRailOut=pStair->IsOutRail();
	m_bAsAscent=pStair->IsAscent();
	m_bOnGround=pStair->IsOnGround();
	m_bSelectUpDir=pStair->GetStartSide();
	m_bHasArrow=pStair->IsArrow();//标注
	m_bInsideRail=pStair->IsAutoRail();
	m_bHasInsideHandRail=pStair->IsInRail();//内侧扶手
	m_strRailWidth=Dist2Str(pStair->GetRailWidth());
	m_strRailHeight=Dist2Str(pStair->GetRailHeight());
	//读取平台长度
	m_dSlabLength=pStair->GetSlabSize();
	m_dSlabLengthUR=pStair->GetSlabSizeUR();
	m_dSlabLengthLR=pStair->GetSlabSizeLR();
	//梯井宽度
	m_strStairWellWidth=Dist2Str(::_tstof(m_strSpaceWidth)-2.0*::_tstof(m_strStairWidth));
	return;
}
void CCrossStairDlg::Dlg2Obj(AcDbEntity *pStep)
{
	TDbCrossStair *pStair=TDbCrossStair::cast(pStep);
	//VERIFY(pStair);
	pStair->SetStepHeight(::_tstof(m_strStepHeight));
	pStair->SetStepWidth(::_tstof(m_strStepWidth));
	pStair->SetStepNum(m_nStepNum);
	pStair->SetStairWidth(::_tstof(m_strStairWidth));
	pStair->SetRailWidth(::_tstof(m_strRailWidth));
	pStair->SetRailHeight(::_tstof(m_strRailHeight));
	pStair->SetRailDistToSide(::_tstof(m_strRailDistToSide));
	pStair->SetRailDist(::_tstof(m_strRailOutDis));
	pStair->SetStairFlag(m_iSelectFloor);
	pStair->SetSpaceWidth(::_tstof(m_strSpaceWidth));
	pStair->SetOutRail(m_bRailOut);
	pStair->SetSideFlag(m_iLRDown);
	pStair->SetSectStepNum(m_iSectStepNum);//剖切的读取可能会出现问题
	pStair->SetStartSide(m_bSelectUpDir);
	pStair->SetAscent(m_bAsAscent);
	pStair->SetSlant(m_bHasSlant);//是否加防滑线
	pStair->SetAutoOutRail(m_bRailOut?m_bAutoOutRail:FALSE);//是否自动生成栏杆
	pStair->SetOnGround(m_bOnGround);
	/*pStair->SetSideBeam(0,m_bLeftBeam);
	pStair->SetSideBeam(1,m_bRightBeam);*/
	pStair->SetInSideBeam(m_bLeftBeam);
	pStair->SetOutSideBeam(m_bRightBeam);
	pStair->SetViewCtrl(m_iViewCtrl);
	//pStair->SetAutoRail(m_bInsideRail);
	pStair->SetArrow(m_bHasArrow);
	pStair->SetAutoRail(m_bHasInsideHandRail?m_bInsideRail:FALSE);//测试，内测栏杆
	pStair->SetInRail(m_bHasInsideHandRail);//内侧扶手
	//写入平台长度
	pStair->SetSlabSize(m_dSlabLength);
	pStair->SetSlabSizeUR(m_dSlabLengthUR);
	pStair->SetSlabSizeLR(m_dSlabLengthLR);
	//  [8/14/2008 nsh]
	//------------------------
	if (m_bEdit)
	{
		delete m_pBakObj;
		m_pBakObj=(TDbCrossStair*)(pStair->clone());
	}

	//------------------------
	return;
}
AcDbEntity* CCrossStairDlg::NewObject()
{
	TDbCrossStair *pEnt;
	if (m_pBakObj==NULL)
	{
		pEnt=new TDbCrossStair;
		pEnt->setLayer(InitLayer(LAY_STAIR));
		pEnt->SetLayerHand3d(InitLayer(LAY_HANDRAIL));
		pEnt->SetLayerRail3d(InitLayer(LAY_RAIL));
		pEnt->SetLayerText(InitLayer(LAY_TEXT));
		pEnt->SetTextStyle(InitTextStyle(TS_DIM));
		pEnt->SetLayerArrow(InitLayer(LAY_OTHER_DIM));

		//add by xlc on 090205 解决用户坐标系下预览文字倾斜的问题
		pEnt->SetLayoutRotation(0);

		return pEnt;
	}
	else
	{
		return (AcDbEntity*)(m_pBakObj->clone());
	}
	
}
bool CCrossStairDlg::UpdateEdit(UINT ctrlID,bool bReportError/* =false */)
{//应用于Change事件
	CWnd *pImageBox=GetDlgItem(IDC_PREVIEW);
	if (!pImageBox)
		return false;
	if (GetSafeHwnd()==NULL)
		return false;

	CEdit *pEdit=(CEdit*)GetDlgItem(ctrlID);
	if (pEdit==NULL)
		return false;

	static bool bUpdating=false;
	if (bUpdating)
		return false;
	bUpdating=true;

	CDataExchange dxOut(this,false);
	CString temp;
	pEdit->GetWindowText(temp);
	switch(ctrlID)
	{//以下分布的处理ID
	case IDC_STAIR_WIDTH:
		{//梯段宽
			if (2*::_tstof(temp)<::_tstof(m_strSpaceWidth) && temp!=_T("") && ::_tstof(temp)>_DIST_SNAP)
			{
				m_strStairWidth=temp;
				DDX_Text(&dxOut,IDC_STAIR_WIDTH,m_strStairWidth);
				//梯井宽度
				m_strStairWellWidth=Dist2Str(::_tstof(m_strSpaceWidth)-2.0*::_tstof(m_strStairWidth));
				DDX_Text(&dxOut,IDC_STATIC_WELLWID,m_strStairWellWidth);
			}
			
			else 
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("梯段宽不正确！"));
					DDX_Text(&dxOut,IDC_STAIR_WIDTH,m_strStairWidth);
					pEdit->SetFocus();
				}
				bUpdating=FALSE;
				return false;
			}
		}
		break;
	case IDC_SPACE_WIDTH:
		{//梯间宽
			if (::_tstof(temp)>=2.0*_MIN_STAIRWIDTH)
			{
				m_strSpaceWidth=temp;
				DDX_Text(&dxOut,IDC_SPACE_WIDTH,m_strSpaceWidth);
				if (_tstof(m_strSpaceWidth)<_tstof(m_strStairWidth)*2)
				{
					m_strStairWidth.Format(_T("%.2f"),_tstof(m_strSpaceWidth)/2);
					DDX_Text(&dxOut,IDC_STAIR_WIDTH,m_strStairWidth);
				}
				//梯井宽度
				m_strStairWellWidth=Dist2Str(::_tstof(m_strSpaceWidth)-2.0*::_tstof(m_strStairWidth));
				DDX_Text(&dxOut,IDC_STATIC_WELLWID,m_strStairWellWidth);
			}
			
			else 
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("梯间宽不正确！"));
					DDX_Text(&dxOut,IDC_SPACE_WIDTH,m_strSpaceWidth);
					pEdit->SetFocus();
				}

				bUpdating=FALSE;
				return false;
			}
		}
		break;
	case IDC_STEP_HEIGHT:
		{//踏步高
			if (::_tstof(temp)<_DIST_SNAP|| (int)(::_tstof(m_strStairHeight)/::_tstof(temp))<2 ||temp==_T(""))
			{
				bUpdating=FALSE;
				if (bReportError)
				{
					::AfxMessageBox(_T("踏步高不正确！"));
					DDX_Text(&dxOut,IDC_STEP_HEIGHT,m_strStepHeight);
					pEdit->SetFocus();
				}
				return false;
			}
			int num=(int)(_tstof(m_strStairHeight)/_tstof(temp)+0.5);
			if (_tstof(temp)>0&&num>1)	{
				m_nStepNum=num;
				m_strStepHeight.Format(_T("%.2f"),_tstof(m_strStairHeight)/m_nStepNum);
				DDX_Text(&dxOut,IDC_STEP_NUM,m_nStepNum);
				if (bReportError)
					DDX_Text(&dxOut,IDC_STEP_HEIGHT,m_strStepHeight);//自动调整			
				UpdateImage();
			}
			if (bReportError){}
		}
		break;
	case IDC_STEP_WIDTH:
		{//踏步宽度
			if (::_tstof(temp)>_DIST_SNAP && temp!=_T(""))
			{
				m_strStepWidth=temp;
				DDX_Text(&dxOut,IDC_STEP_WIDTH,m_strStepWidth);
				m_strStairLength=Dist2Str(_tstof(temp)*(m_bAsAscent? m_nStepNum : m_nStepNum-1));
				DDX_Text(&dxOut,IDC_STAIR_LENGTH,m_strStairLength);
			}
			
			else 
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("踏步宽度不正确！"));
					DDX_Text(&dxOut,IDC_STEP_WIDTH,m_strStepWidth);
					pEdit->SetFocus();
				}

				bUpdating=FALSE;
				return false;
			}
		}
		break;
	case IDC_STEP_NUM:
		{//踏步数目
			if (::_ttoi(temp)<2)
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("踏步数目不正确！"));
					DDX_Text(&dxOut,IDC_STEP_NUM,m_nStepNum);
					pEdit->SetFocus();
				}

				bUpdating=FALSE;
				return false;
			}
			//对剖切步数的控制
			m_nStepNum=::_ttoi(temp);
			m_strStepHeight.Format(_T("%.2f"),_tstof(m_strStairHeight)/m_nStepNum);
			DDX_Text(&dxOut,IDC_STEP_HEIGHT,m_strStepHeight);
			m_iSectStepNum=m_nStepNum/2;
			DDX_Text(&dxOut,IDC_POUSTEP_NUM,m_iSectStepNum);
			if (m_iSectStepNum>m_nStepNum)
			{
				m_iSectStepNum=m_nStepNum/2 +1;
				DDX_Text(&dxOut,IDC_POUSTEP_NUM,m_iSectStepNum);
			}
			DDX_Text(&dxOut,IDC_STEP_NUM,m_nStepNum);
			spin.SetRange(1,m_nStepNum);
			if (bReportError){}
		}
		break;
	case IDC_RAIL_OUTDIS:
		{//扶手伸出距离
			if (::_tstof(temp)*2<-(::_tstof(m_strStepWidth))*m_nStepNum)
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("扶手伸出距离不正确！"));
					DDX_Text(&dxOut,IDC_RAIL_OUTDIS,m_strRailOutDis);
					pEdit->SetFocus();
				}

				bUpdating=FALSE;
				return false;
			}
				
			m_strRailOutDis=temp;
			/*if (CheckENChange(IDC_RAIL_OUTDIS,temp))
				return false;*/
			DDX_Text(&dxOut,IDC_RAIL_OUTDIS,m_strRailOutDis);
			if (bReportError){}
		}
		break;
	case IDC_RAIL_HEIGHT:
		{//扶手高度
			if (::_tstof(temp)<_DIST_SNAP)
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("扶手高度不正确！"));
					DDX_Text(&dxOut,IDC_RAIL_HEIGHT,m_strRailHeight);
					pEdit->SetFocus();
				}

				bUpdating=FALSE;
				return false;
			}
			m_strRailHeight=temp;	
			DDX_Text(&dxOut,IDC_RAIL_HEIGHT,m_strRailHeight);
			if (bReportError){}
		}
		break;
	case IDC_RAIL_WIDTH:
		{//扶手宽度
			if (::_tstof(temp)<_DIST_SNAP||::_tstof(temp)*2>::_tstof(m_strStairWidth))
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("扶手宽度不正确！"));
					DDX_Text(&dxOut,IDC_RAIL_WIDTH,m_strRailWidth);
					pEdit->SetFocus();
				}

				bUpdating=FALSE;
				return false;
			}
			m_strRailWidth=temp;
			DDX_Text(&dxOut,IDC_RAIL_WIDTH,m_strRailWidth);
			if (bReportError){}
		}
		break;
	case IDC_RAIL_DISTTOSIDE:
		{//扶手距边
			if ((-::_tstof(temp)*2>::_tstof(m_strSpaceWidth)-2.0*::_tstof(m_strStairWidth)
				||::_tstof(temp)*2>::_tstof(m_strStairWidth)))
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("扶手距边不正确！"));
					DDX_Text(&dxOut,IDC_RAIL_DISTTOSIDE,m_strRailDistToSide);
					pEdit->SetFocus();
				}

				bUpdating=FALSE;
				return false;
			}
			m_strRailDistToSide=temp;
			DDX_Text(&dxOut,IDC_RAIL_DISTTOSIDE,m_strRailDistToSide);
			if (bReportError){}
		}
		break;
	case IDC_POUSTEP_NUM:
		{//剖切步数
			if (::_tstof(temp)<1||::_tstof(temp)>m_nStepNum)
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("剖切步数不正确"));
					DDX_Text(&dxOut,IDC_POUSTEP_NUM,m_iSectStepNum);
					pEdit->SetFocus();
				}

				bUpdating=FALSE;
				return false;
			}
			spin.SetRange(1,m_nStepNum);
			m_iSectStepNum =::_ttoi(temp);
			DDX_Text(&dxOut,IDC_POUSTEP_NUM,m_iSectStepNum);
			if (bReportError){}
		}
		break;
	case IDC_STAIR_HEIGHTCOMBOX:
		{
// 			static CString strTemp;
// 			strTemp=m_strStairHeight;
// 			CDataExchange dxIn(this,TRUE);
// 			DDX_CBString(&dxIn,IDC_STAIR_HEIGHTCOMBOX,m_strStairHeight);
// 			m_ctrlStairHeight.GetLBText(m_ctrlStairHeight.GetCurSel(),temp);
// 			if (::_tstof(temp)<0 || temp=="")
// 			{
// 				if (bReportError)
// 				{
// 					::AfxMessageBox(_T("楼梯高度不正确"));
// 					m_strStairHeight.Format(_T("%.2f"),_tstof(m_strStepHeight)*m_nStepNum);
// 					DDX_Text(&dxOut,IDC_STAIR_HEIGHTCOMBOX,m_strStairHeight);
// 					pEdit->SetFocus();
// 				}
// 				
// 				bUpdating=FALSE;
// 				return false;
// 			}
// 			
// 			m_strStairHeight=temp;
// 			DDX_Text(&dxOut,IDC_STAIR_HEIGHTCOMBOX,m_strStairHeight);
// 			m_nStepNum=(int)(_tstof(m_strStairHeight)/_tstof(m_strStepHeight)+0.5);
// 			DDX_Text(&dxOut,IDC_STEP_NUM,m_nStepNum);
// 			m_iSectStepNum=m_nStepNum/2;
// 			DDX_Text(&dxOut,IDC_POUSTEP_NUM,m_iSectStepNum);
// 			m_strStepHeight.Format(_T("%.2f"),::_tstof(m_strStairHeight)/m_nStepNum);
// 			DDX_Text(&dxOut,IDC_STEP_HEIGHT,m_strStepHeight);
			if (_tstof(temp)>=2.0*_tstof(m_strStepHeight)-_DIST_SNAP && ::_tstof(temp)<=10000)	{//最少当前2踏步高
				m_strStairHeight=temp;
				DDX_Text(&dxOut,IDC_STAIR_HEIGHTCOMBOX,m_strStairHeight);
				m_nStepNum=(int)(_tstof(m_strStairHeight)/_tstof(m_strStepHeight)+0.5);
				DDX_Text(&dxOut,IDC_STEP_NUM,m_nStepNum);
				m_strStepHeight.Format(_T("%.2f"),(_tstof(m_strStairHeight)/m_nStepNum));
				DDX_Text(&dxOut,IDC_STEP_HEIGHT,m_strStepHeight);
				if (m_iSectStepNum>m_nStepNum)
				{
					m_iSectStepNum = int(m_nStepNum/2);
					DDX_Text(&dxOut,IDC_POUSTEP_NUM,m_iSectStepNum);
				}
				UpdateImage();
			}
			else
			{
				if (bReportError)
				{
					::AfxMessageBox(_T("楼梯高度不正确"));
					m_strStairHeight.Format(_T("%.2f"),_tstof(m_strStepHeight)*m_nStepNum);
					DDX_CBString(&dxOut,IDC_STAIR_HEIGHTCOMBOX,m_strStairHeight);
					pEdit->SetFocus();
				}
				bUpdating=false;
				return false;
			}
		}
		break;
	default:
		break;
	}
	bUpdating=FALSE;
	UpdateImage();
	return false;
}
void CCrossStairDlg::OnControlRange(UINT ctrlID)
{
	UpdateSel();
}
void CCrossStairDlg::UpdateSel()
{
	//楼层处理
	CBaseStairDlg::UpdateSel();
	UpdateData();
	switch(m_iSelectFloor)
	{
	case 0:
		{
			this->GetDlgItem(IDC_HAS_CELLAR)->EnableWindow(TRUE);
			this->GetDlgItem(IDC_HAS_ROOF)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_LEFT_UP)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_RIGHT_UP)->EnableWindow(FALSE);
			if (m_bHasCellar)
			{
				this->GetDlgItem(IDC_LEFT_DOWN)->EnableWindow(TRUE);
				this->GetDlgItem(IDC_RIGHT_DOWN)->EnableWindow(TRUE);
				m_iLRDown=(m_bLeftDown==FALSE)?1:2;
			}
			else
			{
				this->GetDlgItem(IDC_LEFT_DOWN)->EnableWindow(FALSE);
				this->GetDlgItem(IDC_RIGHT_DOWN)->EnableWindow(FALSE);
				m_iLRDown=0;
			}
		}
		break;
	case 1:
		{
			this->GetDlgItem(IDC_HAS_CELLAR)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_LEFT_DOWN)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_RIGHT_DOWN)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_HAS_ROOF)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_LEFT_UP)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_RIGHT_UP)->EnableWindow(FALSE);
			m_iLRDown=0;
			m_iLRUp=0;
		}
		break;
	case 2:
		{
			this->GetDlgItem(IDC_HAS_CELLAR)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_LEFT_DOWN)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_RIGHT_DOWN)->EnableWindow(FALSE);
			this->GetDlgItem(IDC_HAS_ROOF)->EnableWindow(TRUE);
			if (m_bHasOutRoof)
			{
				this->GetDlgItem(IDC_LEFT_UP)->EnableWindow(TRUE);
				this->GetDlgItem(IDC_RIGHT_UP)->EnableWindow(TRUE);
				m_iLRUp=(m_bLeftUp==FALSE)?1:2;
				m_iLRDown=m_iLRUp;
			}
			else
			{
				this->GetDlgItem(IDC_LEFT_UP)->EnableWindow(FALSE);
				this->GetDlgItem(IDC_RIGHT_UP)->EnableWindow(FALSE);
				m_iLRUp=0;
				m_iLRDown=0;
			}			
		}
		break;
	default:
		break;
	}
	//以下控制外侧扶手和自动生成栏杆的操作
	this->GetDlgItem(IDC_RAIL_AUTO)->EnableWindow(m_bRailOut);
	//以下对2D or 3D的显示
	if (m_bNeed2D && m_bNeed3D) m_iViewCtrl=0;
	else if (!m_bNeed2D && m_bNeed3D) m_iViewCtrl=2;
	else if (m_bNeed2D && !m_bNeed3D) m_iViewCtrl=1;
	else m_iViewCtrl=0;
	this->GetDlgItem(IDC_INSIDERAIL)->EnableWindow(m_bHasInsideHandRail);

	// 修改描述:各种楼梯对话框中的“标注上楼方向”一项
	// 应在“需要2D”一项勾选后才变成可选择状态。（2097）
	// 修改人,修改时间:Zyu modify on 100325
	GetDlgItem(IDC_HAS_ARROW)->EnableWindow(m_bNeed2D);

	//梯井宽度计算
	m_strStairWellWidth=Dist2Str(::_tstof(m_strSpaceWidth)-2*::_tstof(m_strStairWidth));

	UpdateData(FALSE);
	UpdateImage();
	return;
}
//事件处理函数
void CCrossStairDlg::OnChangeStairHeight()
{
	CString temp;
	this->GetDlgItem(IDC_STAIR_HEIGHT)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_STAIR_HEIGHT);
	}
}
void CCrossStairDlg::OnChangeStairWidth()
{
	CString temp;
	this->GetDlgItem(IDC_STAIR_WIDTH)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_STAIR_WIDTH);
	}
}
void CCrossStairDlg ::OnChangeSpaceWidth()
{
	CString temp;
	this->GetDlgItem(IDC_SPACE_WIDTH)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_SPACE_WIDTH,false);
	}
}

void CCrossStairDlg::OnChangeStepWidth()
{
	CString temp;
	this->GetDlgItem(IDC_STEP_WIDTH)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_STEP_WIDTH);
	}
}
void CCrossStairDlg::OnChangeStepNum()
{
	CString temp;
	this->GetDlgItem(IDC_STEP_NUM)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_STEP_NUM);
	}
}
void CCrossStairDlg::OnKFStepNum()
{
	//modiby by xlc on 090317
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		CString strText;
		GetDlgItem(IDC_STEP_NUM)->GetWindowText(strText);
		if (fabs(_tstof(strText)-m_nStepNum)<_DIST_SNAP)
			return;

		UpdateEdit(IDC_STEP_NUM,true);
	}
}
void CCrossStairDlg::OnChangeStepHeight()
{
//	UpdateEdit(IDC_STEP_HEIGHT,false);
}
void CCrossStairDlg::OnKFStepHeight()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_STEP_HEIGHT)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strStepHeight))<_DIST_SNAP)
			return;

		UpdateEdit(IDC_STEP_HEIGHT,true);
	}
}
void CCrossStairDlg ::OnChangePouNum()
{
	CString temp;
	this->GetDlgItem(IDC_POUSTEP_NUM)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_POUSTEP_NUM);
	}
}
void CCrossStairDlg::OnChangeRailDistoSide()
{
	CString temp;
	this->GetDlgItem(IDC_RAIL_DISTTOSIDE)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_RAIL_DISTTOSIDE);
	}
}
void CCrossStairDlg::OnChangeRailHeight()
{
	CString temp;
	this->GetDlgItem(IDC_RAIL_HEIGHT)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_RAIL_HEIGHT);
	}
}
void CCrossStairDlg::OnChangeRailOutDis()
{
	CString temp;
	this->GetDlgItem(IDC_RAIL_OUTDIS)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_RAIL_OUTDIS);
	}
}
void CCrossStairDlg::OnChangeRailWidth()
{
	CString temp;
	this->GetDlgItem(IDC_RAIL_WIDTH)->GetWindowText(temp);
	if (temp!=_T(""))
	{
		UpdateEdit(IDC_RAIL_WIDTH);
	}
}
void CCrossStairDlg::OnClickRailOut()
{
	UpdateData(TRUE);
	this->GetDlgItem(IDC_RAIL_AUTO)->EnableWindow(m_bRailOut);
	UpdateImage();
}
//楼梯高度的ComBox的处理
void CCrossStairDlg::OnSelChangeStairHeightComBox()
{
	UpdateEdit(IDC_STAIR_HEIGHTCOMBOX);
}
void CCrossStairDlg::OnChangeStairHeightComBox()
{
// 	CString temp;
// 	this->GetDlgItem(IDC_STAIR_HEIGHTCOMBOX)->GetWindowText(temp);
// 	if (temp!=_T(""))
// 	{
// 		UpdateEdit(IDC_STAIR_HEIGHTCOMBOX);
// 	}
}
void CCrossStairDlg::OnKFStairHeight()
{//楼层高度失去焦点的操作
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		CString strText;
		GetDlgItem(IDC_STAIR_HEIGHTCOMBOX)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strStairHeight))<_DIST_SNAP)
			return;
		UpdateEdit(IDC_STAIR_HEIGHTCOMBOX,true);
	}
}
void CCrossStairDlg::OnClickHasCellar()
{//有地下室
	UpdateData(TRUE);
	if (m_bHasCellar)
	{
		this->GetDlgItem(IDC_LEFT_DOWN)->EnableWindow(TRUE);
		this->GetDlgItem(IDC_RIGHT_DOWN)->EnableWindow(TRUE);
		m_iLRDown=(m_bLeftDown==FALSE)?1:2;
	}
	else
	{
		this->GetDlgItem(IDC_LEFT_DOWN)->EnableWindow(FALSE);
		this->GetDlgItem(IDC_RIGHT_DOWN)->EnableWindow(FALSE);
		m_iLRDown=0;
	}
	UpdateImage();
}
void CCrossStairDlg::OnClickHasRoof()
{//有出屋顶
	UpdateData(TRUE);
	if (m_bHasOutRoof)
	{
		this->GetDlgItem(IDC_LEFT_UP)->EnableWindow(TRUE);
		this->GetDlgItem(IDC_RIGHT_UP)->EnableWindow(TRUE);
		m_iLRUp=(m_bLeftUp==FALSE)?1:2;
		m_iLRDown=m_iLRUp;
	}
	else
	{
		this->GetDlgItem(IDC_LEFT_UP)->EnableWindow(FALSE);
		this->GetDlgItem(IDC_RIGHT_UP)->EnableWindow(FALSE);
		m_iLRUp=0;
		m_iLRDown=0;
	}	
	UpdateImage();
}
BOOL CCrossStairDlg::CheckENChange(UINT ctrlID,const CString pStr)
{
	CString temp;
	this->GetDlgItemText(ctrlID,temp);
	if (temp==pStr)
	{
		return FALSE;
	}

	return TRUE;
}
void CCrossStairDlg::OnClose() 
{
	GetDlgItem(IDCANCEL)->SetFocus();
	CBaseStairDlg::OnClose();
}


void CCrossStairDlg::OnKFStairWidth()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_STAIR_WIDTH)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strStairWidth))<_DIST_SNAP)
			return;

		UpdateEdit(IDC_STAIR_WIDTH,true);
	}
}
void CCrossStairDlg ::OnKFSpaceWidth()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_SPACE_WIDTH)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strSpaceWidth))<_DIST_SNAP)
			return;

		UpdateEdit(IDC_SPACE_WIDTH,true);
	}
}

void CCrossStairDlg::OnKFStepWidth()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_STEP_WIDTH)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strStepWidth))<_DIST_SNAP)
			return;

		UpdateEdit(IDC_STEP_WIDTH,true);
	}
}
void CCrossStairDlg ::OnKFPouNum()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_POUSTEP_NUM)->GetWindowText(strText);
		if (fabs(_tstof(strText)-m_iSectStepNum)<_DIST_SNAP)
			return;

		UpdateEdit(IDC_POUSTEP_NUM,true);
	}
}
void CCrossStairDlg::OnKFRailDistoSide()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_RAIL_DISTTOSIDE)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strRailDistToSide))<_DIST_SNAP)
			return;

		UpdateEdit(IDC_RAIL_DISTTOSIDE,true);
	}
}
void CCrossStairDlg::OnKFRailHeight()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_RAIL_HEIGHT)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strRailHeight))<_DIST_SNAP)
			return;

		UpdateEdit(IDC_RAIL_HEIGHT,true);
	}
}
void CCrossStairDlg::OnKFRailOutDis()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_RAIL_OUTDIS)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strRailOutDis))<_DIST_SNAP)
			return;

		UpdateEdit(IDC_RAIL_OUTDIS,true);
	}
}
void CCrossStairDlg::OnKFRailWidth()
{
	if (GetFocus()!=GetDlgItem(IDCANCEL))
	{
		//modiby by xlc on 090317
		CString strText;
		GetDlgItem(IDC_RAIL_WIDTH)->GetWindowText(strText);
		if (fabs(_tstof(strText)-_tstof(m_strRailWidth))<_DIST_SNAP)
			return;

		UpdateEdit(IDC_RAIL_WIDTH,true);
	}
}