// DbDoubleLinePipe.h: interface for the TDbDoubleLinePipe class.
//
//////////////////////////////////////////////////////////////////////

#if !defined(AFX_DBDOUBLELINEPIPE_H__33485C04_82F0_4304_ADF9_A82CEC1A599C__INCLUDED_)
#define AFX_DBDOUBLELINEPIPE_H__33485C04_82F0_4304_ADF9_A82CEC1A599C__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

/*============================================================================*
* Copyright(c), 1994-2007, Beijing Tangent Engineering Software Co.Ltd.
* 作    者:   沈睿
* 创建时间:   大约在冬季
* 描    述:   双线水管
* 归属项目:   给排水
* 历史记录:   2008－6－26 补头文件注释
=============================================================================*/

#include "DbPipe.h"
#include "TGripData.h"

#define GRIP_MAXNUM_DBPIPE_DBPIPE 10  // 夹点最大值

class PS_EXP TDbDoubleLinePipe : public TDbPipe  
{
    DECLARE_TENTBASE();
    ACRX_DECLARE_MEMBERS(TDbDoubleLinePipe);   
private:
    static const Adesk::UInt8 g_nVersion;
public:
	TDbDoubleLinePipe();
	virtual ~TDbDoubleLinePipe();
protected:
    Adesk::UInt16 m_iFlange;// 连接类型 0：法兰 1：焊接
    double	m_nWidth;		// 宽度 如果是圆风管，这里是直径
    double  m_nRate;        // 弯头 曲率
    double  m_nFlangeDn;    // 法兰直径
    double  m_nFlangeThick; // 法兰厚度
    double  m_nSpare;       // 备用
    AcDbHardPointerId m_idDoteLayer;
	static TWT_GRIPAPPDATA s_gripAppData[GRIP_MAXNUM_DBPIPE_DBPIPE]; // cet  2012.11.6 add 保存夹点数据
    
public:
    int GetFlange() const {
        return (int)m_iFlange;
    }
    void SetFlange(int iFlange) {
        assertWriteEnabled();
        m_iFlange=(Adesk::UInt16)iFlange;
    }
    double GetWidth() const {
        return m_nWidth;
    }
    void SetWidth(double nWidth) {
        assertWriteEnabled();
        m_nWidth = nWidth;
    }
    double GetFlangeDn() const {
        return m_nFlangeDn;
    }
    void SetFlangeDn(double nFlangeDn) {
        assertWriteEnabled();
        m_nFlangeDn = nFlangeDn;
    }
    double GetFlangeThick() const {
        return m_nFlangeThick;
    }
    void SetFlangeThick(double nFlangeThick) {
        assertWriteEnabled();
        m_nFlangeThick = nFlangeThick;
    }
    double GetRate() const {
        return m_nRate;
    }
    void SetRate(double nRate) {
        assertWriteEnabled();
        m_nRate = nRate;
    }
    double GetSpare() const {
        return m_nSpare;
    }
    void SetSpare(double nSpare) {
        assertWriteEnabled();
        m_nSpare = nSpare;
    }
    void SetDoteLayer(const AcDbObjectId& id) {
        assertWriteEnabled();
        m_idDoteLayer=id;
    }
    AcDbObjectId GetDoteLayer() const {
        return m_idDoteLayer;
    }
	// cet 2018.7.10 add 中心线线型
	void SetMidLinetype(const AcDbObjectId &idLinetype);
	void SetMidLinetype(const CString &sLinetypeName);
	AcDbObjectId MidLinetypeId(bool bLayerWhenNotFound = true) const;
	CString MidLinetype() const;
	// cet 2018.6.20 add 双线水管系统名
	virtual CString GetPipeSystemName() const;
	// cet 2012.11.2 add 双线水管连接fitting时，水管一点是否需要连接变径
	// 起点 nSide = 0;  终点 nSide = 1; dDn 表示变径另一端大小
	bool IsLinkReducing(int nSide) const;
	// cet 2012.11.2 add 双线水管端点是否连接变径
	void SetLinkReducing(int nSide, bool bLink);  
    
    void GetBrokenCurves(const XCurveSegment &cv,DList<XCurveSegment> &lstRes) const;
	// 根据夹点索引获得，该索引类型和夹点提示 cet 2012.11.6 add
	void ExplainGripIndex(int nIndex, bool &bCmd, CString &sTip) const;
    
public: // Override TDbEntity
    virtual void CopyPropertiesFrom(AcDbEntity *pSrc, unsigned gMatchFlag);
    virtual Acad::ErrorStatus subGetClassID(CLSID* pClsid) const;
    virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &dc) const;
    virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &dc) const;
    virtual void GetTips(DList<TObjInfoUnit> &info) const; //取动态属性显示数据
    virtual Acad::ErrorStatus GetGripText(int i, CString &cs) const;
    virtual int GetFirstVersion()const{return 7;}
public: // Override AcDbEntity
    Acad::ErrorStatus         subGetOsnapPoints(AcDb::OsnapMode osnapMode, INT_PTR gsSelectionMark, const AcGePoint3d&	ptPick, const AcGePoint3d&	lastPoint, const AcGeMatrix3d&	viewXform, AcGePoint3dArray& snapPoints, AcDbIntArray& geomIds) const;
    virtual Acad::ErrorStatus subGetGripPoints(AcGePoint3dArray& gripPoints, AcDbIntArray&  osnapModes, AcDbIntArray&  geomIds) const;
	// cet 2012.11.6 add 支持夹点启动绘制命令 
	#if ADS > 15
		virtual Acad::ErrorStatus subGetGripPoints(AcDbGripDataPtrArray&	grips, 
													const double			curViewUnitSize, 
													const int				gripSize,
													const AcGeVector3d&		curViewDir, 
													const int				bitflags) const;
		
		virtual Acad::ErrorStatus subMoveGripPointsAt(const AcDbVoidPtrArray& appData,
														const AcGeVector3d& offset,
														const int bitflags);
	#endif
	virtual Acad::ErrorStatus dwgInFields (AcDbDwgFiler*);
    virtual Acad::ErrorStatus dwgOutFields(AcDbDwgFiler*) const;
    virtual Acad::ErrorStatus dxfInFields (AcDbDxfFiler*);
    virtual Acad::ErrorStatus dxfOutFields(AcDbDxfFiler*) const;
    virtual Acad::ErrorStatus subClose();
	virtual  Acad::ErrorStatus subMoveGripPointsAt(const AcDbIntArray& indices,
		const AcGeVector3d& offset);
	
public:// Override TDbPipePrototype	
    // 派生类可以加入其他的判断条件（如管径等）
    // 自动增加节点到当前数据库，ids－该节点自动连接的管线，派生类应当重载
    virtual AcDbObjectId AddAutoNodeToDb(const XPoint &ptAt,const DList<AcDbObjectId> &ids) const;
    virtual void ResetDrawSpeed();//重新设置显示加速数据
    // 考虑遮挡的当前曲线,二维
    void GetHideCurve(XCurveSegment& cvHide) const;
    Acad::ErrorStatus DrawVerPipe2d(XExplodeDraw &dc) const;

protected:
	virtual void DisposeBreak(const XCurveSegment &cv,
		AcGePoint3dArray &arPoint,const XPoint &ptLoc,double dWidth,
		double dDistance,const AcGeVector3d &vtDir, DList<XCurveSegment> &lstBreakCurve) const;
private:
	Acad::ErrorStatus MoveGSPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset,BOOL bGrip);
};

#endif // !defined(AFX_DBDOUBLELINEPIPE_H__33485C04_82F0_4304_ADF9_A82CEC1A599C__INCLUDED_)