#include "StdAfx.h"
#include "AcGiExplodeDraw.h"
#include "AecISODrawMake.h"
#include "KTModelLayoutXData.h"
#include "AecDbEwPipeDim.h"
#include "WPipeDimConfigDlg.h"
#include "AecDbEwPipe.h"
#include "AecDbEwfitting.h"
#include "AecDbHvacFitting.h"
#include "AecDbHvacDuct.h"
#include "AecDbEwequipment.h"
#include "AecDbPipeHanger.h"
#include "KTSetting.h"
#include "KTCadUtility.h"
#include "PipelineTools.h"                                                                                                                                     
#include "AecDbECableTray.h"
#include "AecDbEcFitting.h"
#include "dbtable.h"
#include "coretools.h"

#pragma region brep-include
#include "acutads.h"
#include "acedads.h"
#include "string.h"
#include "adscodes.h"
#include "brent.h"
#include "brbrep.h"
#include "dbmain.h"
#include "geextc3d.h"
#include "brface.h"
#include "brvtx.h"
#include "dbents.h"
#include "geassign.h"
#include "geextc2d.h"
#include "gexbndsf.h"
#include "aced.h"
#include "acestext.h"
#include "actrans.h"
#include "adeskabb.h"
#include "brbctrav.h"
#include "brbvtrav.h"
#include "bredge.h"
#include "brfltrav.h"
#include "brgbl.h"
#include "brletrav.h"
#include "brlvtrav.h"
#include "dbsol3d.h"
#include "dbsymtb.h"
#include "gelnsg3d.h"
#include "gemat3d.h"
#include "genurb3d.h"
#include "genurbsf.h"
#include "geray3d.h"
#include "ol_errno.h"
#include "adesk.h"
#include "adslib.h"
#include "brbetrav.h"
#include "brbftrav.h"
#include "brbstrav.h"
#include "brcstrav.h"
#include "brelem2d.h"
#include "breltrav.h"
#include "brentrav.h"
#include "brhit.h"
#include "brloop.h"
#include "brmetrav.h"
#include "brprops.h"
#pragma endregion


extern AcGePoint3d MidPoint(const AcGePoint3d& pt1, const AcGePoint3d& pt2);
static const Adesk::UInt16 kColorByLayer = 256;
AecISODrawMake::AecISODrawMake(void)
{
	m_dArrowL = 1.0;
	m_dArrowW = 0.33;
	m_dScale = 50.0;
	m_dDimoffset = 10.0;
	//西南默认
	m_xform.Set(AcGePoint3d::kOrigin,PI / 6.0);
	m_dISOAngle = PI / 6.0;
	m_bDimTxtIso = TRUE;
	m_bDimPipeEl = FALSE;
	m_dRefEl = 0.0;
	m_bWasDone = FALSE;
	m_dTxtH = 2.0;
	m_dGastGap = 5;
	m_idDimSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);
	m_idDimlay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
	m_nDimIndex = 0;
	m_planeLookDir.set(AcGePoint3d::kOrigin, AcGeVector3d(-1,-1,1));
	m_bODxtDim = FALSE;
	m_bFitFGHide = FALSE;
	m_bElStyle = FALSE;
	KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, m_xInitDataMap);

	CString sDocScale = "";
	m_xInitDataMap.GetAt(_T("Scale"), sDocScale);
	int nIndex = sDocScale.Find(':', 0);
	if (nIndex != -1)
	{
		m_dScale = _ttof(sDocScale.Mid(nIndex + 1)) / _ttof(sDocScale.Mid(0, nIndex));
	}

	m_dWFact = 0.7;
	m_xInitDataMap.GetAt(DOC_DIMTXTF, m_dWFact);
}

AecISODrawMake::AecISODrawMake(int nType,double dAngle, BOOL b45NoIso)
{
	AcGeVector3d vtNorm;
	m_nDimIndex = 0;
	switch(nType)
	{
	case 0: //西南 30,120
		{
			m_dISOAngle = dAngle;//PI / 6.0;
			m_xform.Set(AcGePoint3d::kOrigin,m_dISOAngle,nType,b45NoIso);

			vtNorm.set(-1, -1, 1);
			m_planeLookDir.set(AcGePoint3d::kOrigin, vtNorm);
			break;
		}
	case 1://东南 -30,30
		{
			m_dISOAngle = dAngle;//PI / 6.0;
			m_xform.Set(AcGePoint3d::kOrigin,-m_dISOAngle,nType,b45NoIso);

			vtNorm.set(1, -1, 1);
			m_planeLookDir.set(AcGePoint3d::kOrigin, vtNorm);

			break;
		}
	case 2://东北 -150,-30
		{
			m_dISOAngle = dAngle - PI;//-5.0 * PI / 6.0;
			m_xform.Set(AcGePoint3d::kOrigin,m_dISOAngle,nType,b45NoIso);

			vtNorm.set(1, 1, 1);
			m_planeLookDir.set(AcGePoint3d::kOrigin, vtNorm);

			break;
		}
	case 3://西北 150,-150
		{
			m_dISOAngle = PI - dAngle;//5.0 * PI / 6.0;
			m_xform.Set(AcGePoint3d::kOrigin,m_dISOAngle,nType,b45NoIso);

			vtNorm.set(-1, 1, 1);
			m_planeLookDir.set(AcGePoint3d::kOrigin, vtNorm);
			break;
		}
	default:
		break;
	}

	m_dDimoffset = 10.0;
	m_dArrowL = 1.0;
	m_dArrowW = 0.33;
	m_dScale = 50.0;
	m_bDimTxtIso = TRUE;
	m_bDimPipeEl = FALSE;
	m_dRefEl = 0.0;
	m_dTxtH = 2.0;
	m_dGastGap = 5;
	m_bFitFGHide = FALSE;
	m_bWasDone = FALSE;
	m_bElStyle = FALSE;
	m_idDimSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);
	m_idDimlay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
	KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, m_xInitDataMap);

	CString sDocScale = "";
	m_xInitDataMap.GetAt(_T("Scale"), sDocScale);
	int nIndex = sDocScale.Find(':', 0);
	if (nIndex != -1)
	{
		m_dScale = _ttof(sDocScale.Mid(nIndex + 1)) / _ttof(sDocScale.Mid(0, nIndex));
	}
	m_dWFact = 0.7;
	m_xInitDataMap.GetAt(DOC_DIMTXTF, m_dWFact);
}

AecISODrawMake::AecISODrawMake(double dAngle)
{
	m_xform.Set(AcGePoint3d::kOrigin,dAngle);
	m_dISOAngle = dAngle;
	m_dDimoffset = 10.0;
	m_dArrowL = 1.0;
	m_dArrowW = 0.33;
	m_dScale = 50.0;
	m_bDimTxtIso = TRUE;
	m_bDimPipeEl = FALSE;
	m_dRefEl = 0.0;
	m_nDimIndex = 0;
	m_dTxtH = 2.0;
	m_dGastGap = 5;
	m_bWasDone = FALSE;
	m_bFitFGHide = FALSE;
	m_bElStyle = FALSE;
	m_idDimSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);
	m_idDimlay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);

	m_planeLookDir.set(AcGePoint3d::kOrigin, AcGeVector3d(-1, -1, 1));
	KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, m_xInitDataMap);

	CString sDocScale = "";
	m_xInitDataMap.GetAt(_T("Scale"), sDocScale);
	int nIndex = sDocScale.Find(':', 0);
	if (nIndex != -1)
	{
		m_dScale = _ttof(sDocScale.Mid(nIndex + 1)) / _ttof(sDocScale.Mid(0, nIndex));
	}
	m_dWFact = 0.7;
	m_xInitDataMap.GetAt(DOC_DIMTXTF, m_dWFact);
}

AecISODrawMake::~AecISODrawMake(void)
{
}

typedef struct PIPElDimEd
{
	AcGePoint3d ptPos;
	AcGeVector3d vtDir;
}PIPELDIMED;

static bool PipElDimed(std::vector<PIPElDimEd>& pipeldimed, AcGePoint3d& ptPos, AcGeVector3d& vtDir)
{
	AcGeLine3d ln3d(ptPos,vtDir);
	
	for (int i = 0;i < pipeldimed.size();i++)
	{
		PIPElDimEd &pipeldim = pipeldimed.at(i);
		AcGeLine3d ln3d2(pipeldim.ptPos, pipeldim.vtDir);
		if ( ln3d.isColinearTo(ln3d2) )
		{
			return true;
		}
	}
	PIPElDimEd pipeldm;
	pipeldm.ptPos = ptPos;
	pipeldm.vtDir = vtDir;
	pipeldimed.push_back(pipeldm);
	return false;
}

void AecISODrawMake::MakeISOPipeline(AcDbObjectIdArray& arPipeIds,double dPlotPipeW,int nPipeDim,int nPipeDim2,int bDNDim,BOOL bDimTxtIso,BOOL bVlvISOV)
{
	AcGePoint3d ptGe[6],ptPos;
	AcDbObjectId idCen,id;
	AcGeVector3d vtV;
	AecInterface inf0,inf1;
	AcDbEntity* pEnt = NULL;
	TCHAR szHD[33];
	double dGask = 0.0, dLen = 0;
	AcDbPolyline *pPl = NULL;
	AcDbVoidPtrArray arPipePls;
	int nConnectType = 0;//焊接0 承插1 螺纹2 法兰管3
	std::vector<PIPElDimEd> pipeldimed;
	std::vector<PIPElDimEd> pipeodimed;

	for (int i = 0;i < arPipeIds.length();i++)
	{
		id = arPipeIds.at(i);
		id.handle().getIntoAsciiBuffer(szHD);

		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id,AcDb::kForRead))
		{
			AecDbEwPipe* pPipe = AecDbEwPipe::cast(pEnt);
			if (pPipe != NULL)
			{
				AecDbObjXDataMap* pXDataMap = pPipe->GetSpecialtyData(AcDb::kForRead);

				int nColor = kColorByLayer;
				if (pXDataMap != NULL && pXDataMap->GetAt(_T("COLOR"),nColor) )
				{
					//临时
					pXDataMap->SetAt(_T("HD"), szHD);
				}
				
				dGask = pPipe->GetGasketThick();
				pPipe->GetInterface(0, inf0);
				pPipe->GetInterface(1, inf1);
				inf0.vtDir.normalize(); inf1.vtDir.normalize();

				if (dGask > 1.e-3)
				{
					inf0.ptPos -= inf0.vtDir * 0.5 * m_dGastGap * m_dScale;
					inf1.ptPos -= inf1.vtDir * 0.5 * m_dGastGap * m_dScale;;
				}
				else
				{
					nConnectType = 0;//焊接0 承插1 螺纹2 法兰管3
					pXDataMap->GetAt(PIPE_CONNECT, nConnectType);
					if (nConnectType == 3 || nConnectType == 4)
					{
						inf0.ptPos -= inf0.vtDir * 0.5 * m_dGastGap * m_dScale;
						inf1.ptPos -= inf1.vtDir * 0.5 * m_dGastGap * m_dScale;;
					}
				}
				
				pPl = MakePoly(inf0.ptPos, inf1.ptPos,pPipe->layerId(),dPlotPipeW * m_dScale,nColor,pXDataMap);
				arPipePls.append(pPl);

				if (nPipeDim > 0)
				{
					//长度尺寸标注
					dLen = pPipe->GetLength();
					MakeDim(inf0.ptPos, inf1.ptPos,dLen);
				}

				if (nPipeDim2 > 0)
				{	
					//市政标注方法
					MakeDim2(pXDataMap, inf0.ptPos, inf1.ptPos,pPipe->layer(),dPlotPipeW * m_dScale);
				}

				if (bDNDim > 0 || m_bODxtDim > 0)
				{
					if (!PipElDimed(pipeodimed, inf0.ptPos, inf0.vtDir))
					{
						MakeDim3(pXDataMap, inf0.ptPos, inf1.ptPos,pPipe->layer(),dPlotPipeW * m_dScale,bDimTxtIso);
					}
				}

				//水平管的标高标注
			
				AcGeLine3d ln(inf0.ptPos, inf0.vtDir);
				if (ln.isParallelTo(AcGePlane::kXYPlane))
				{
					if (!PipElDimed(pipeldimed,inf0.ptPos, inf0.vtDir))
					{
						MakeDim4(inf0.ptPos, inf0.vtDir, m_dRefEl, pPipe->layerId());
					}
				}

				int nConnectType = 0;//焊接0 承插1 螺纹2 法兰管3
				pXDataMap->GetAt(PIPE_CONNECT, nConnectType);

				if ( nConnectType == 3)
				{
					ptGe[0] = inf0.ptPos;
					ptGe[1] = inf1.ptPos;
					AcGeVector3d vtDir = ptGe[1] - ptGe[0];

					vtV = vtDir;
					if (vtDir.isParallelTo(AcGeVector3d::kZAxis))
					{
						if (fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
							vtV = AcGeVector3d::kYAxis;//45度为 y
						else
							vtV = AcGeVector3d::kXAxis;//45度为 y
					}
					else
					{
						AcGeLine3d ln(ptGe[0], vtDir);
						if (ln.isParallelTo(AcGePlane::kXYPlane))
						{
							vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
						}
						else
						{
							vtV = vtDir.perpVector();
						}
					}
					vtV.normalize();

					if (bVlvISOV && vtDir.isPerpendicularTo(AcGeVector3d::kZAxis))
					{
						vtV = AcGeVector3d::kZAxis;
					}

					double dWD = 0.0;
					pXDataMap->GetAt(PIPE_INTERFACED, dWD);

					//标注法兰
					double dDN = 0.0, dPress = 0.0;
					pXDataMap->GetAt(PIPE_DN, dDN);
					pXDataMap->GetAt(PID_PIPE_DPRESS, dPress);

					//三者其一
					CString sStd, sEndF, sDimtext, sLevel, sMater, sRem, sSpec;
					pXDataMap->GetAt(PIPE_STDNO, sStd);
					pXDataMap->GetAt(PIPE_FLANGF, sEndF);
					pXDataMap->GetAt(PIPE_FLANGF1, sEndF);
					pXDataMap->GetAt(PIPE_FLANGF2, sEndF);

					pXDataMap->GetAt(PIPE_LEVEL, sLevel);
					pXDataMap->GetAt(PIPE_STDNO, sStd);
					pXDataMap->GetAt(PIPE_MATERIALFT, sMater);
					pXDataMap->GetAt(PID_PIPE_DPRESS, dPress);
					pXDataMap->GetAt(PIPE_MATERIALFT, sMater);
					pXDataMap->GetAt(PIPE_DESCR, sRem);

					//法兰 DN100-PN1.6 RF GB/T9116.1-2000
					sDimtext.Format(_T("法兰 DN%d-PN%.1f %s %s"), (int)(dDN + 0.5), dPress, sEndF, sStd);
					sSpec.Format(_T("DN%d-PN%.1f"), (int)(dDN + 0.5), dPress);

					int nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);

					ptGe[0] += vtV * 0.5 * dWD;
					ptGe[2] = ptGe[0] - vtV * dWD;

					ptPos = MidPoint(ptGe[0], ptGe[2]);

					if (!m_bFitFGHide)
						MakePoly(ptGe[0], ptGe[2], pPipe->layerId(), dPlotPipeW * m_dScale, nColor, pXDataMap);

					DimIndex(nIndex, ptPos, vtV, id);

					ptGe[1] += vtV * 0.5 * dWD;
					ptGe[3] = ptGe[1] - vtV * dWD;

					ptPos = MidPoint(ptGe[1], ptGe[3]);

					if (!m_bFitFGHide)
						MakePoly(ptGe[1], ptGe[3], pPipe->layerId(), dPlotPipeW * m_dScale, nColor, pXDataMap);

					DimIndex(nIndex, ptPos, vtV, id);
				}
			}

			AecDbHvacDuct* pDuct = AecDbHvacDuct::cast(pEnt);
			if (pDuct != NULL)
			{
				AecDbObjXDataMap* pXDataMap = pDuct->GetSpecialtyData(AcDb::kForRead);

				int nColor = kColorByLayer;
				if (pXDataMap != NULL && pXDataMap->GetAt(_T("COLOR"),nColor) )
				{
					//临时
					pXDataMap->SetAt(_T("HD"), szHD);
				}
				pPl = MakePoly(pDuct->StartPoint(),pDuct->EndPoint(),pDuct->GetSingleLayer(),dPlotPipeW * m_dScale,nColor,pXDataMap);
				arPipePls.append(pPl);

				if (nPipeDim > 0)
				{
					//尺寸标注
					double dLen, dEndP;
					pDuct->getEndParam(dEndP);
					pDuct->getDistAtParam(dEndP, dLen);
					MakeDim(pDuct->StartPoint(),pDuct->EndPoint(),dLen);
				}

				if (nPipeDim2 > 0)
				{	
					//暖通wxh
					MakeHDim2(pXDataMap,pDuct->StartPoint(),pDuct->EndPoint(),pDuct->layer(),dPlotPipeW * m_dScale);
				}

				if (bDNDim > 0 || m_bODxtDim > 0)
				{
					MakeHDim3(pXDataMap, pDuct->StartPoint(), pDuct->EndPoint(),pDuct->layer(), dPlotPipeW *m_dScale);
				}

				//水平管的标高标注
				pDuct->GetInterface(0, inf0);
				AcGeLine3d ln(inf0.ptPos, inf0.vtDir);
				if (ln.isParallelTo(AcGePlane::kXYPlane))
				{
					MakeDim4(inf0.ptPos, inf0.vtDir, m_dRefEl, pDuct->layerId());
				}
			}

			AecDbECableTray *pTray = AecDbECableTray::cast(pEnt);
			if (pTray != NULL)
			{
				AecDbObjXDataMap *pXDataMap = pTray->GetSpecialtyData(AcDb::kForRead);

				int nColor = kColorByLayer;
				if (pXDataMap != NULL && pXDataMap->GetAt(_T("COLOR"), nColor))
				{
					//临时
					pXDataMap->SetAt(_T("HD"), szHD);
				}
				pPl = MakePoly(pTray->StartPoint(), pTray->EndPoint(), pTray->GetSingleLayer(), dPlotPipeW * m_dScale, nColor, pXDataMap);
				arPipePls.append(pPl);

				if (nPipeDim > 0)
				{
					//尺寸标注
					double dLen, dEndP;
					pTray->getEndParam(dEndP);
					pTray->getDistAtParam(dEndP, dLen);
					MakeDim(pTray->StartPoint(), pTray->EndPoint(), dLen);
				}

				if (nPipeDim2 > 0)
				{
					//桥架wxh
					MakeEDim2(pXDataMap, pTray->StartPoint(), pTray->EndPoint(), pTray->layer(), dPlotPipeW * m_dScale);
				}

				if (bDNDim > 0 || m_bODxtDim > 0)
				{
					MakeEDim3(pXDataMap, pTray->StartPoint(), pTray->EndPoint(), pTray->layer(), dPlotPipeW * m_dScale);
				}

				//水平管的标高标注
				pTray->GetInterface(0, inf0);
				AcGeLine3d ln(inf0.ptPos, inf0.vtDir);
				if (ln.isParallelTo(AcGePlane::kXYPlane))
				{
					MakeDim4(inf0.ptPos, inf0.vtDir, m_dRefEl, pTray->layerId());
				}
			}

			pEnt->close();
		}
	}

	//遮挡
	LookatandBreak();
}

void AecISODrawMake::MakeISOAxis(AcDbObjectIdArray& arAxis)
{
	AcDbObjectId id;
	AcDbEntity *pEnt = NULL;

	for (int i = 0;i < arAxis.length();i++)
	{
		id = arAxis.at(i);
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
		{
			AcDbLine *pLn = AcDbLine::cast(pEnt);
			if (pLn != NULL)
			{
				AcGePoint3d pt1(pLn->startPoint()), pt2(pLn->endPoint());
				MakeLine(pt1, pt2, pLn->layerId());
			}

			AcDbBlockReference *pRef = AcDbBlockReference::cast(pEnt);
			if (pRef != NULL)
			{
				MakeRef(pRef);
			}

			pEnt->close();
		}
	}
}

void AecISODrawMake::GetPtIsoTransform(AcGePoint3d &pt)
{
	m_xform.GetTransformByThis(pt);
}

AcDbPolyline * AecISODrawMake::MakePoly(AcGePoint3d ptSta,AcGePoint3d ptEnd,const AcDbObjectId& idLay,double dPlotPipeW,int nCr/* = 256*/,AecDbObjXDataMap* pXDataMap)
{
	double dEl = (ptSta.z + ptEnd.z) / 2.0 - m_dRefEl;

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptSta);
		m_xform.GetTransformByThis(ptEnd);
	}

	AcDbPolyline* pPoly = new AcDbPolyline;
	pPoly->addVertexAt(0,ptSta.convert2d(AcGePlane::kXYPlane));
	pPoly->addVertexAt(1,ptEnd.convert2d(AcGePlane::kXYPlane));
	pPoly->setConstantWidth(dPlotPipeW);
	pPoly->setLayer(idLay);
	pPoly->setLinetype(KTSetting::InitLineStyle(_T("Continuous")));
	pPoly->setColorIndex(nCr);
	pPoly->setNormal(AcGeVector3d::kZAxis);

	if (pXDataMap != NULL)
	{
		pXDataMap->SetAt(PIPE_EL,dEl);
		pXDataMap->Write(pPoly,BIMDATA_APP);

		AecDbObjXDataMap xDataMap;

		ptSta.z = ptSta.z = 0.0;
		AcGeLineSeg3d ln3d(ptSta,ptEnd);
		AcGePoint3d ptS, ptE, ptInt;
		AcDbEntity *pEnt = NULL;
		IntsctWith intsct;
		AcGeVector3d vtLn3d = ptEnd - ptSta;
		AcGeVector3d vtThat;

		for (int i = 0;i < m_arISOEntPtrs.length();i++)
		{
			pEnt = (AcDbEntity *)m_arISOEntPtrs.at(i);

			AcDbPolyline *pPl = AcDbPolyline::cast(pEnt);
			if (pPl != NULL)
			{
				if (xDataMap.Read(pPl, BIMDATA_APP))
				{
					pPl->getStartPoint(ptS);
					pPl->getEndPoint(ptE);
					vtThat = ptE - ptS;
					if (vtLn3d.isParallelTo(vtThat))
						continue;

					ptS.z = ptE.z = 0.0;
					AcGeLineSeg3d ln3d2(ptS,ptE);

					if (ln3d.intersectWith(ln3d2, ptInt))
					{
						if (ptInt.distanceTo(ptS) > 5.0 &&
							ptInt.distanceTo(ptE) > 5.0 &&
							ptInt.distanceTo(ptSta) > 5.0 &&
							ptInt.distanceTo(ptEnd) > 5.0)
						{
							//记录交点和 id1,id2
							intsct.pPl1 = pPoly;
							intsct.pPl2 = pPl;
							intsct.ptInt = ptInt;

							m_arIntsctWith.append(intsct);
						}
					}
				}
			}
		}
	}

	AddISOEnt(pPoly);

	return pPoly;
}

AcDbLine *AecISODrawMake::MakeLine(AcGePoint3d &ptSta, AcGePoint3d &ptEnd, const AcDbObjectId &idLay)
{
	double dEl = (ptSta.z + ptEnd.z) / 2.0 - m_dRefEl;

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptSta);
		m_xform.GetTransformByThis(ptEnd);
	}
	
	AcDbLine *pLn = new AcDbLine(ptSta, ptEnd);
	pLn->setLayer(idLay);

	AddISOEnt(pLn);
	return pLn;
}

void AecISODrawMake::MakeRef(AcDbBlockReference* pRef)
{
	AcGePoint3d pt2 = pRef->position();
	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(pt2);
	}
	AcGeVector3d vt = pt2 - pRef->position();
	AcGeMatrix3d xm;
	xm.setToTranslation(vt);

	AcDbBlockReference *pRefCln = (AcDbBlockReference *)pRef->clone();
	pRefCln->transformBy(xm);

	AddISOEnt(pRefCln);
}

bool AecISODrawMake::GetProjSrcPointAtParam(LPCTSTR sHd1, double dPa1, AcGePoint3d& pt1)
{
	bool bGetOk = false;
	AcDbHandle hd(sHd1);

	AcDbObjectId id;
	if (Acad::eOk == acdbCurDwg()->getAcDbObjectId(id, false, hd))
	{
		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
		{
			AecDbEwPipeBase *pPipe = AecDbEwPipeBase::cast(pEnt);
			if (pPipe != NULL)
			{
				AcDbLine ln(pPipe->StartPoint(), pPipe->EndPoint());

				if (Acad::eOk == ln.getPointAtParam(dPa1, pt1))
					bGetOk = true;
			}
			pEnt->close();
		}
	}
	return bGetOk;
}

static void BreakPolyline(AcDbPolyline* pPly, const AcGePoint3d& pt2, double dBreak, AcDbPolyline*& pPly1, AcDbPolyline*& pPly2)
{
	AcGePoint3d ptS, ptE,ptS1,ptE1;
	pPly->getStartPoint(ptS);
	pPly->getEndPoint(ptE);

	AcGeVector3d vt = ptE - ptS;
	vt.normalize();
	vt *= 0.5 * dBreak;

	ptE1 = pt2 - vt;
	ptS1 = pt2 + vt;

	double dPlotPipeW = 0.0;
	pPly->getConstantWidth(dPlotPipeW);

	pPly1 = new AcDbPolyline;
	pPly1->addVertexAt(0, ptS.convert2d(AcGePlane::kXYPlane));
	pPly1->addVertexAt(1, ptE1.convert2d(AcGePlane::kXYPlane));
	pPly1->setConstantWidth(dPlotPipeW);
	pPly1->setLayer(pPly->layerId());
	pPly1->setLinetype(pPly->linetypeId());
	pPly1->setColorIndex(pPly->colorIndex());
	pPly1->setNormal(AcGeVector3d::kZAxis);

	AecDbObjXDataMap xData1;
	if (xData1.Read(pPly, BIMDATA_APP))
	{
		xData1.Write(pPly1, BIMDATA_APP);
	}

	pPly2 = new AcDbPolyline;
	pPly2->addVertexAt(0, ptS1.convert2d(AcGePlane::kXYPlane));
	pPly2->addVertexAt(1, ptE.convert2d(AcGePlane::kXYPlane));
	pPly2->setConstantWidth(dPlotPipeW);
	pPly2->setLayer(pPly->layerId());
	pPly2->setLinetype(pPly->linetypeId());
	pPly2->setColorIndex(pPly->colorIndex());
	pPly2->setNormal(AcGeVector3d::kZAxis);
	xData1.Write(pPly2, BIMDATA_APP);
}

static void AddPolyBreak(AcDbPolyline* pPoly,const AcGePoint3d& ptInt, AcArray< PolyBreaks > &arPolyBreaks)
{
	bool bFind = false;

	for (int i = 0; i < arPolyBreaks.length();i++)
	{
		PolyBreaks &plbks1 = arPolyBreaks.at(i);

		if (plbks1.pPoly == pPoly)
		{
			plbks1.arBreaks.append(ptInt);
			bFind = true;
			break;
		}
	}

	if (!bFind)
	{
		PolyBreaks plbrks;
		plbrks.pPoly = pPoly;
		plbrks.arBreaks.append(ptInt);
		arPolyBreaks.append(plbrks);
	}
}

extern void SortPoints(AcGePoint3dArray &points, AcDbCurve *pLine);
void AecISODrawMake::DoPolyBreak(PolyBreaks &plBrks, double dBreak)
{
	AcGePoint3d ptS, ptE;
	plBrks.pPoly->getStartPoint(ptS);
	plBrks.pPoly->getEndPoint(ptE);

	AecDbObjXDataMap xData;
	xData.Read(plBrks.pPoly, BIMDATA_APP);

	double dCnW = 0.0;
	plBrks.pPoly->getConstantWidth(dCnW);
	dBreak += dCnW;

	AcDbLine ln(ptS, ptE);
	SortPoints(plBrks.arBreaks, &ln);

	plBrks.arBreaks.insertAt(0, ptS);
	plBrks.arBreaks.append(ptE);

	AcDbPolyline *pPly2 = NULL;

	AcGeVector3d vt;
	for (int i = 0;i < plBrks.arBreaks.length() - 1;i++)
	{
		ptS = plBrks.arBreaks.at(i);
		ptE = plBrks.arBreaks.at(i + 1);

		vt = ptE - ptS;
		vt.normalize();

		if (i == 0)
		{
			ptE -= vt * 0.5 * dBreak;

			pPly2 = new AcDbPolyline;
			pPly2->addVertexAt(0, ptS.convert2d(AcGePlane::kXYPlane));
			pPly2->addVertexAt(1, ptE.convert2d(AcGePlane::kXYPlane));
			pPly2->setConstantWidth(dCnW);
			pPly2->setLayer(plBrks.pPoly->layerId());
			pPly2->setLinetype(plBrks.pPoly->linetypeId());
			pPly2->setColorIndex(plBrks.pPoly->colorIndex());
			pPly2->setNormal(AcGeVector3d::kZAxis);
			xData.Write(pPly2, BIMDATA_APP);

			AddISOEnt(pPly2);
		}
		else if (i == plBrks.arBreaks.length() - 2)
		{
			ptS += vt * 0.5 * dBreak;

			pPly2 = new AcDbPolyline;
			pPly2->addVertexAt(0, ptS.convert2d(AcGePlane::kXYPlane));
			pPly2->addVertexAt(1, ptE.convert2d(AcGePlane::kXYPlane));
			pPly2->setConstantWidth(dCnW);
			pPly2->setLayer(plBrks.pPoly->layerId());
			pPly2->setLinetype(plBrks.pPoly->linetypeId());
			pPly2->setColorIndex(plBrks.pPoly->colorIndex());
			pPly2->setNormal(AcGeVector3d::kZAxis);
			xData.Write(pPly2, BIMDATA_APP);

			AddISOEnt(pPly2);
		}
		else
		{
			ptS += vt * 0.5 * dBreak;

			pPly2 = new AcDbPolyline;
			pPly2->addVertexAt(0, ptS.convert2d(AcGePlane::kXYPlane));
			pPly2->addVertexAt(1, ptE.convert2d(AcGePlane::kXYPlane));
			pPly2->setConstantWidth(dCnW);
			pPly2->setLayer(plBrks.pPoly->layerId());
			pPly2->setLinetype(plBrks.pPoly->linetypeId());
			pPly2->setColorIndex(plBrks.pPoly->colorIndex());
			pPly2->setNormal(AcGeVector3d::kZAxis);
			xData.Write(pPly2, BIMDATA_APP);

			AddISOEnt(pPly2);
		}
	}
}

bool AecISODrawMake::LookatandBreak()
{
#ifdef _DEBUG
	acutPrintf(_T("\nIntsctWith count=%d"), m_arIntsctWith.length());
#endif

	AcArray< PolyBreaks > arPolyBreaks;

	double dBreak = 2.0;
	m_xInitDataMap.GetAt(DOC_BREAKSPACE, dBreak);
	dBreak *= m_dScale;

	AecDbObjXDataMap xData1;
	AecDbObjXDataMap xData2;

	AcGeVector3d vtDir;
	AcGeVector3d vtLook = m_planeLookDir.normal();

	CString sHd1, sHd2;
	AcDbLine ln1, ln2;
	AcGePoint3d ptS, ptE,pt1,pt2;
	double dPa1 = 0, dPa2 = 0;

	for (int i = 0; i < m_arIntsctWith.length(); i++)
	{
		IntsctWith &ints = m_arIntsctWith.at(i);

		xData1.Read(ints.pPl1, BIMDATA_APP);
		xData2.Read(ints.pPl2, BIMDATA_APP);

		xData1.GetAt(_T("HD"), sHd1);
		xData2.GetAt(_T("HD"), sHd2);

		ints.pPl1->getStartPoint(ptS);
		ints.pPl1->getEndPoint(ptE);
		ln1.setStartPoint(ptS);
		ln1.setEndPoint(ptE);

		ints.pPl2->getStartPoint(ptS);
		ints.pPl2->getEndPoint(ptE);
		ln2.setStartPoint(ptS);
		ln2.setEndPoint(ptE);

		ln1.getParamAtPoint(ints.ptInt, dPa1);
		ln2.getParamAtPoint(ints.ptInt, dPa2);

		//获取交点 来自 三维方向的管道位置点 pt1,pt2 投影
		if (GetProjSrcPointAtParam(sHd1, dPa1, pt1) &&
			GetProjSrcPointAtParam(sHd2, dPa2, pt2))
		{
			vtDir = pt1 - pt2;
			if (vtDir.dotProduct(vtLook) > 1.e-10)
			{
				//ints.pPl1 打断 ints.pPl2
				AddPolyBreak(ints.pPl2, ints.ptInt, arPolyBreaks);
			}
			else
			{
				//ints.pPl2 打断 ints.pPl1
				AddPolyBreak(ints.pPl1, ints.ptInt, arPolyBreaks);
			}
		}
	}

	for (int i = 0;i < arPolyBreaks.length();i++)
	{
		PolyBreaks &plBrks = arPolyBreaks.at(i);

		for (int k = 0;k < m_arISOEntPtrs.length();k++)
		{
			if (plBrks.pPoly == m_arISOEntPtrs.at(k))
			{
				m_arISOEntPtrs.removeAt(k);
				break;
			}
		}
		DoPolyBreak(plBrks, dBreak);

		if (!plBrks.arNewPolys.isEmpty())
		{
			m_arISOEntPtrs.append(plBrks.arNewPolys);
		}
	}
	return true;
}

void AecISODrawMake::MakeDim(AcGePoint3d ptSta,AcGePoint3d ptEnd,double dLen)
{
	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptSta);
		m_xform.GetTransformByThis(ptEnd);
	}

	AcGePoint3d ptTemp;
	AcGeVector3d vt = ptEnd - ptSta;
	vt.normalize();

	//Z向的变换不标注尺寸
	if (vt.isParallelTo(AcGeVector3d::kYAxis))
		return;

	if ( fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
	{
		vt.rotateBy(m_dISOAngle,AcGeVector3d::kZAxis);
	}
	else
	{
		vt.rotateBy(PI - 2 * m_dISOAngle,AcGeVector3d::kZAxis);
	}
	vt *= m_dDimoffset * m_dScale;

	AcGePoint3d ptSta1 = ptSta;
	AcGePoint3d ptEnd1 = ptEnd;

	ptSta += vt;
	ptEnd += vt;

	vt = ptEnd - ptSta;
	vt.normalize();

	CPoint pt;
	pt.x = m_arISOEntPtrs.length();

	//标注线<----->
	AcDbPolyline* pPl = new AcDbPolyline;
	pPl->addVertexAt(0,ptSta.convert2d(AcGePlane::kXYPlane),0,0,m_dArrowW * m_dScale);
	ptTemp = ptSta + m_dArrowL * m_dScale * vt;
	pPl->addVertexAt(1,ptTemp.convert2d(AcGePlane::kXYPlane),0,0,0);
	ptTemp = ptEnd - m_dArrowL * m_dScale * vt;
	pPl->addVertexAt(2,ptTemp.convert2d(AcGePlane::kXYPlane),0,m_dArrowW * m_dScale,0);
	pPl->addVertexAt(3,ptEnd.convert2d(AcGePlane::kXYPlane),0,0,0);
	pPl->setLayer(m_idDimlay);

	int nFr = AddISOEnt(pPl);

	AcGePoint3d ptTemp2;
	//标注端线
	if ( fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
	{
		if (vt.isParallelTo(AcGeVector3d::kYAxis))
		{
			vt.rotateBy(-m_dISOAngle,AcGeVector3d::kZAxis);
		}
		else
		{
			vt.rotateBy(m_dISOAngle,AcGeVector3d::kZAxis);
		}
	}
	else
	{
		vt.rotateBy(PI - 2 * m_dISOAngle,AcGeVector3d::kZAxis);
	}

	vt.normalize();
	vt *= m_dArrowL * m_dScale; //端线的一半=箭头长

	ptTemp = ptSta + vt;
	ptTemp2 = ptSta1;// ptSta - vt;

	AcDbLine* pLine = new AcDbLine(ptTemp,ptTemp2);
	pLine->setLayer(m_idDimlay);
	AddISOEnt(pLine);

	ptTemp = ptEnd + vt;
	ptTemp2 = ptEnd1;// ptEnd - vt;
	pLine = new AcDbLine(ptTemp,ptTemp2);
	pLine->setLayer(m_idDimlay);
	AddISOEnt(pLine);

	CString sText;
	sText.Format(_T("%d"),(int)(dLen + 0.5)); //四舍五入

	AcDbText* pText = MakeDimText(ptSta,ptEnd,m_dTxtH,m_idDimSty,sText);
	AddISOEnt(pText);

	pt.y = m_arISOEntPtrs.length() - 1;
	if (pt.y > pt.x)
	{
		m_arGrpIdx.Add(pt);
	}
}

void AecISODrawMake::MakeDim(AcGePoint3d ptSta, AcGePoint3d ptEnd, AcGePoint3d ptTxt, CString &sDimTxt, bool bDimTxtIso)
{
	AcGePoint3d ptTemp;
	AcGeVector3d vt = ptEnd - ptSta;
	vt.normalize();

	if (fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
	{
		vt.rotateBy(m_dISOAngle, AcGeVector3d::kZAxis);
	}
	else
	{
		vt.rotateBy(PI - 2 * m_dISOAngle, AcGeVector3d::kZAxis);
	}
	vt *= m_dDimoffset * m_dScale;

	AcDbLine ln(ptSta, ptEnd);
	AcGePoint3d ptTxt1;
	ln.getClosestPointTo(ptTxt, vt, ptTxt1,Adesk::kTrue);

	vt = ptTxt - ptTxt1;
	ptSta += vt;
	ptEnd += vt;

	vt = ptEnd - ptSta;
	vt.normalize();

	CPoint pt;
	pt.x = m_arISOEntPtrs.length();

	//标注线<----->
	AcDbPolyline *pPl = new AcDbPolyline;
	pPl->addVertexAt(0, ptSta.convert2d(AcGePlane::kXYPlane), 0, 0, m_dArrowW * m_dScale);
	ptTemp = ptSta + m_dArrowL * m_dScale * vt;
	pPl->addVertexAt(1, ptTemp.convert2d(AcGePlane::kXYPlane), 0, 0, 0);
	ptTemp = ptEnd - m_dArrowL * m_dScale * vt;
	pPl->addVertexAt(2, ptTemp.convert2d(AcGePlane::kXYPlane), 0, m_dArrowW * m_dScale, 0);
	pPl->addVertexAt(3, ptEnd.convert2d(AcGePlane::kXYPlane), 0, 0, 0);
	pPl->setLayer(m_idDimlay);

	int nFr = AddISOEnt(pPl);

	AcGePoint3d ptTemp2;
	//标注端线
	if (fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
	{
		if (vt.isParallelTo(AcGeVector3d::kYAxis))
		{
			vt.rotateBy(-m_dISOAngle, AcGeVector3d::kZAxis);
		}
		else
		{
			vt.rotateBy(m_dISOAngle, AcGeVector3d::kZAxis);
		}
	}
	else
	{
		vt.rotateBy(PI - 2 * m_dISOAngle, AcGeVector3d::kZAxis);
	}

	vt.normalize();
	vt *= m_dArrowL * m_dScale; //端线的一半=箭头长

	ptTemp = ptSta + vt;
	ptTemp2 = ptSta - vt;

	AcDbLine *pLine = new AcDbLine(ptTemp, ptTemp2);
	pLine->setLayer(m_idDimlay);
	AddISOEnt(pLine);

	ptTemp = ptEnd + vt;
	ptTemp2 = ptEnd - vt;
	pLine = new AcDbLine(ptTemp, ptTemp2);
	pLine->setLayer(m_idDimlay);
	AddISOEnt(pLine);

	ptTemp = ptSta;
	ptTemp2 = ptEnd;

	if (!m_bWasDone)
	{
		m_xform.GetInvrtTransformByThis(ptTemp);
		m_xform.GetInvrtTransformByThis(ptTemp2);
	}

	double dH = m_dTxtH;
	AcGeVector3d vt1 = ptTemp2 - ptTemp;
	if (vt1.isParallelTo(AcGeVector3d::kXAxis))//X
	{
		ptTxt.y += (dH * m_dScale);//半个字高间隙
	}
	else if (vt1.isParallelTo(AcGeVector3d::kYAxis))//Y
	{
		ptTxt.x -= (dH * m_dScale);//半个字高间隙
	}
	else
	{
		if (vt1.x > 1.e-10 && vt1.y > 1.e-10) //I
		{
			vt1.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
			vt1.normalize();
			ptTxt += (dH * m_dScale * vt1);
		}

		if (vt1.x < 1.e-10 && vt1.y > 1.e-10) //II
		{
			vt1.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
			vt1.normalize();
			ptTxt += (dH * m_dScale * vt1);
		}

		if (vt1.x < 1.e-10 && vt1.y < 1.e-10) //III==I
		{
			vt1.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
			vt1.normalize();
			ptTxt += (dH * m_dScale * vt1);
		}

		if (vt1.x > 1.e-10 && vt1.y < 1.e-10) //IV==II
		{
			vt1.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
			vt1.normalize();
			ptTxt += (dH * m_dScale * vt1);
		}
	}

	CString sText = sDimTxt;
	AcDbText *pText = MakeDimText(ptSta, ptEnd, ptTxt,m_idDimSty,m_dTxtH,sText);
	AddISOEnt(pText);

	pt.y = m_arISOEntPtrs.length() - 1;
	if (pt.y > pt.x)
	{
		m_arGrpIdx.Add(pt);
	}
}

void AecISODrawMake::MakeDim2(AecDbObjXDataMap* pXDataMap,AcGePoint3d ptSta,AcGePoint3d ptEnd,TCHAR* pszLay,double dPipeWD)
{
	int nUnit = 1;
	bool bDimPipeEl = false;
	double dEl = 0.0;
	dEl = (ptSta.z - 0.0) / nUnit - m_dRefEl / nUnit;
	AcGeVector3d vtDir = ptEnd - ptSta;
	AcGeLine3d ln3d;
	ln3d.set(ptSta, ptEnd);
	if (AcGePlane::kXYPlane.isParallelTo(ln3d) && m_bDimPipeEl)
	{
		bDimPipeEl = true;
	}

	int nUnitDrw = 1;//默认毫米
	struct resbuf rb;
	acedGetVar(_T("INSUNITS"), &rb);
	if (rb.resval.rint == AcDb::kUnitsMeters)
	{
		nUnitDrw = 1000;
	}

	int nApp = 0;
	pXDataMap->GetAt(PIPE_EAPP, nApp);
	WPipe::EApp eApp = (WPipe::EApp)nApp;

	if ( (eApp >= WPipe::eButtweld && eApp <= WPipe::eFlange) || eApp == WPipe::eGroove )
	{
		if (!CoreTools::hasCSSZ(true)) return;

		CUIISQLiteServer Db;
		if (!PipelineTools::getSqliteDB(_T("Plumbing.db"), Db))
		{
			AfxMessageBox(_T("未找到数据库文件Plumbing.db,请重新安装！"));
			return;
		}

		AecDbObjXDataMap xDataMap;
		if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap)) return;

		CString sDimUp, sDimDwn;
		if (PipelineTools::FormatDimText(&Db, xDataMap, pXDataMap, sDimUp, sDimDwn, dEl, pszLay, nUnit))
		{
			int nTrade = 0;
			xDataMap.GetAt(DOC_TRADE, nTrade);
			if (nTrade == WPipe::eCivial)
			{
				sDimDwn = _T("");//市政只要上标
			}

			if (!m_bWasDone)
			{
				m_xform.GetTransformByThis(ptSta);
				m_xform.GetTransformByThis(ptEnd);
			}

			AcGePoint3d ptGeOn = ptSta;
			Midpoint(ptSta, ptEnd, ptGeOn);

			double dDn = 0.0;
			pXDataMap->GetAt(PIPE_DN, dDn);

			vtDir.normalize();

			if (vtDir.isParallelTo(AcGeVector3d::kYAxis))
			{
				vtDir = AcGeVector3d::kYAxis;
			}

			if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
			{
				vtDir = AcGeVector3d::kXAxis;
			}

			AcGeVector3d vtV = vtDir;
			if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)//第2象限
			{
				vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
				vtDir *= -1.0;//转到第4象限
			}
			else if (vtDir.x < -1.e-10 && vtDir.y < -1.e-10)//第3象限
			{
				vtDir.negate();//转道第1象限
				vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
			}
			else
			{
				vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
			}

			ptGeOn += vtV * dPipeWD * 2.0; //

			AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
			AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);

			AecDbEwPipeDim *pDim = new AecDbEwPipeDim;
			//pDim->AddAecDbWEntity(id1);
			pDim->SetDimStyle(1);
			pDim->SetDimDir(0);
			pDim->SetDimTextUporDownFlag(1);
			pDim->SetTextStyleId(idTSty);
			pDim->SetTextLayerId(idDimLay);
			pDim->setLayer(idDimLay);
			sDimUp.TrimLeft();
			sDimDwn.TrimLeft();
			if (sDimUp.IsEmpty() && sDimDwn.IsEmpty())
			{
				delete pDim;
				return;
			}

			pDim->AddDimText(sDimUp, sDimDwn);

			double dTxtH = m_dTxtH, dTxWS = 1.0;
			//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
			xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

			CString sDimupScr, sDimupScrTrue;
			xDataMap.GetAt(DOC_SCRIPTT, sDimupScr);
			CWPipeDimConfigDlg::PipeScript2Detail(sDimupScr, sDimupScrTrue);
			pDim->SetDimupScript(sDimupScrTrue);

			CString sDimdwScr, sDimdwScrTrue;
			xDataMap.GetAt(DOC_SCRIPTB, sDimdwScr);
			CWPipeDimConfigDlg::PipeScript2Detail(sDimdwScr, sDimdwScrTrue);
			pDim->SetDimdownScript(sDimdwScrTrue);

			pDim->SetPScale(m_dScale);
			pDim->SetTextHeight(dTxtH);
			pDim->SetTextWidthScale(dTxWS);

			vtDir = ptEnd - ptSta;
			vtDir /= 10.0;
			ptSta += vtDir;

			pDim->AppendPoint(ptSta);
			pDim->AppendPoint(ptEnd);

			pDim->SetDimupdownSpace(dDn);
			pDim->SetTextLayerId(idDimLay);

			AcDbVoidPtrArray arSubPtrs;
			pDim->explode(arSubPtrs);
			delete pDim;

			if (arSubPtrs.length() == 1)
			{
				AcDbText *pText = (AcDbText *)arSubPtrs.first();
				double dOb = m_xform.GetISOOblique(vtDir);
				pText->setLayer(m_idDimlay);
				pText->setTextStyle(m_idDimSty);

				if (m_bDimTxtIso)
				{
					pText->setOblique(dOb);
				}

				AddISOEnt(pText);
			}
		}
	}
}

void AecISODrawMake::MakeEDim2(AecDbObjXDataMap *pXDataMap, AcGePoint3d ptSta, AcGePoint3d ptEnd, TCHAR *pszLay, double dPipeWD)
{
	int nUnit = 1;
	bool bDimPipeEl = false;
	double dEl = 0.0;
	dEl = (ptSta.z - 0.0) / nUnit - m_dRefEl / nUnit;
	AcGeVector3d vtDir = ptEnd - ptSta;
	AcGeLine3d ln3d;
	ln3d.set(ptSta, ptEnd);
	if (AcGePlane::kXYPlane.isParallelTo(ln3d) && m_bDimPipeEl)
	{
		bDimPipeEl = true;
	}

	int nUnitDrw = 1;//默认毫米
	struct resbuf rb;
	acedGetVar(_T("INSUNITS"), &rb);
	if (rb.resval.rint == AcDb::kUnitsMeters)
	{
		nUnitDrw = 1000;
	}

	int nApp = 0;
	pXDataMap->GetAt(KEY_APP, nApp);
	WPipe::EApp eApp = (WPipe::EApp)nApp;
	if (eApp == WPipe::eBridge)
	{
		CString sDimUp, sDimDwn, sNo, sType;

		int nType = 0;
		pXDataMap->GetAt(KEY_SECSHAPE, nType);
		ESection eType = (ESection)nType;

		AecHvac::DuctParam data;
		memset(&data, 0, sizeof(AecHvac::DuctParam));

		switch (eType)
		{
		case eRect:
		{
			sType = _T("");
			pXDataMap->GetAt(KEY_TYPE, sType);

			sNo = _T("");
			pXDataMap->GetAt(KEY_TYPE, sNo);

			pXDataMap->GetAt(KEY_SIZE1, data.dSize[0]); //L
			pXDataMap->GetAt(KEY_SIZE2, data.dSize[1]); //w

			if (bDimPipeEl)
			{
				double dBomEl = ptSta.z;
				dBomEl -= 0.5 * data.dSize[1];
				dBomEl /= nUnitDrw;//米单位

				sDimUp.Format(_T("%s-%s %dx%d底%.3fm"), sType, sNo, (int)(data.dSize[0] + 0.5), (int)(data.dSize[1] + 0.5), dBomEl);
			}
			else
			{
				sDimUp.Format(_T("%s-%s %dx%d"), sType, sNo, (int)(data.dSize[0] + 0.5), (int)(data.dSize[1] + 0.5));
			}
		}
		case eCircle:
		{
			double dBomEl = ptSta.z;
			dBomEl /= nUnitDrw;

			pXDataMap->GetAt(KEY_SIZE1, data.dSize[0]); //D

			if (bDimPipeEl)
			{
				sDimUp.Format(_T("%s-%s D%d中%.3fm"), sType, sNo, (int)(data.dSize[0] + 0.5), dBomEl);
			}
			else
			{
				sDimUp.Format(_T("%s-%s D%d"), sType, sNo, (int)(data.dSize[0] + 0.5));
			}
		}
		default:
			break;
		}

		if (!m_bWasDone)
		{
			m_xform.GetTransformByThis(ptSta);
			m_xform.GetTransformByThis(ptEnd);
		}

		AecDbObjXDataMap xDataMap;
		if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap)) return;

		AcGePoint3d ptGeOn = ptSta;
		Midpoint(ptSta, ptEnd, ptGeOn);

		double dDn = 0.0;
		pXDataMap->GetAt(PIPE_DN, dDn);

		vtDir.normalize();

		if (vtDir.isParallelTo(AcGeVector3d::kYAxis))
		{
			vtDir = AcGeVector3d::kYAxis;
		}

		if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
		{
			vtDir = AcGeVector3d::kXAxis;
		}

		AcGeVector3d vtV = vtDir;
		if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)//第2象限
		{
			vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
			vtDir *= -1.0;//转到第4象限
		}
		else if (vtDir.x < -1.e-10 && vtDir.y < -1.e-10)//第3象限
		{
			vtDir.negate();//转道第1象限
			vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
		}
		else
		{
			vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
		}

		ptGeOn += vtV * dPipeWD * 2.0; //

		AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
		AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);

		AecDbEwPipeDim *pDim = new AecDbEwPipeDim;
		pDim->SetDimStyle(1);
		pDim->SetDimDir(0);
		pDim->SetDimTextUporDownFlag(1);
		pDim->SetTextStyleId(idTSty);
		pDim->SetTextLayerId(idDimLay);
		pDim->setLayer(idDimLay);
		sDimUp.TrimLeft();
		sDimDwn.TrimLeft();
		if (sDimUp.IsEmpty() && sDimDwn.IsEmpty())
		{
			delete pDim;
			return;
		}

		pDim->AddDimText(sDimUp, sDimDwn);

		double dTxtH = m_dTxtH, dTxWS = 1.0;
		//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
		xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

		pDim->SetPScale(m_dScale);
		pDim->SetTextHeight(dTxtH);
		pDim->SetTextWidthScale(dTxWS);

		vtDir = ptEnd - ptSta;
		vtDir /= 10.0;
		ptSta += vtDir;

		pDim->AppendPoint(ptSta);
		pDim->AppendPoint(ptEnd);

		pDim->SetDimupdownSpace(dDn);
		pDim->SetTextLayerId(idDimLay);

		AcDbVoidPtrArray arSubPtrs;
		pDim->explode(arSubPtrs);
		delete pDim;

		if (arSubPtrs.length() == 1)
		{
			AcDbText *pText = (AcDbText *)arSubPtrs.first();
			double dOb = m_xform.GetISOOblique(vtDir);
			pText->setLayer(m_idDimlay);
			pText->setTextStyle(m_idDimSty);
			if (m_bDimTxtIso)
			{
				pText->setOblique(dOb);
			}
			AddISOEnt(pText);
		}
	}
	else if (eApp == WPipe::eTrench)
	{
		CString sDimUp, sDimDwn, sNo, sType, sKey;

		AecHvac::DuctParam data;
		memset(&data, 0, sizeof(AecHvac::DuctParam));

		pXDataMap->GetAt(KEY_WELLW, data.dSize[4]);

		sKey.Format(_T("%s_%d"), KEY_SIZE, 5);
		pXDataMap->GetAt(sKey, data.dSize[5]);

		sType = _T("");
		pXDataMap->GetAt(KEY_TYPE, sType);

		sNo = _T("");
		pXDataMap->GetAt(KEY_TYPE, sNo);

		if (bDimPipeEl)
		{
			double dTopEl = ptSta.z;
			dTopEl += 0.5 * data.dSize[1];
			dTopEl /= nUnitDrw;

			sDimUp.Format(_T("%s-%s %dx%d顶%.3fm"), sType, sNo, (int)(data.dSize[4] + 0.5), (int)(data.dSize[5] + 0.5), dTopEl);
		}
		else
		{
			sDimUp.Format(_T("%s-%s %dx%d"), sType, sNo, (int)(data.dSize[4] + 0.5), (int)(data.dSize[5] + 0.5));
		}

		if (!m_bWasDone)
		{
			m_xform.GetTransformByThis(ptSta);
			m_xform.GetTransformByThis(ptEnd);
		}

		AecDbObjXDataMap xDataMap;
		if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap)) return;

		AcGePoint3d ptGeOn = ptSta;
		Midpoint(ptSta, ptEnd, ptGeOn);

		double dDn = 0.0;
		pXDataMap->GetAt(PIPE_DN, dDn);

		vtDir.normalize();

		if (vtDir.isParallelTo(AcGeVector3d::kYAxis))
		{
			vtDir = AcGeVector3d::kYAxis;
		}

		if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
		{
			vtDir = AcGeVector3d::kXAxis;
		}

		AcGeVector3d vtV = vtDir;
		if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)//第2象限
		{
			vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
			vtDir *= -1.0;//转到第4象限
		}
		else if (vtDir.x < -1.e-10 && vtDir.y < -1.e-10)//第3象限
		{
			vtDir.negate();//转道第1象限
			vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
		}
		else
		{
			vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
		}

		ptGeOn += vtV * dPipeWD * 2.0; //

		AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
		AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);

		AecDbEwPipeDim *pDim = new AecDbEwPipeDim;
		pDim->SetDimStyle(1);
		pDim->SetDimDir(0);
		pDim->SetDimTextUporDownFlag(1);
		pDim->SetTextStyleId(idTSty);
		pDim->SetTextLayerId(idDimLay);
		pDim->setLayer(idDimLay);
		sDimUp.TrimLeft();
		sDimDwn.TrimLeft();
		if (sDimUp.IsEmpty() && sDimDwn.IsEmpty())
		{
			delete pDim;
			return;
		}

		pDim->AddDimText(sDimUp, sDimDwn);

		double dTxtH = m_dTxtH, dTxWS = 1.0;
		//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
		xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

		pDim->SetPScale(m_dScale);
		pDim->SetTextHeight(dTxtH);
		pDim->SetTextWidthScale(dTxWS);

		vtDir = ptEnd - ptSta;
		vtDir /= 10.0;
		ptSta += vtDir;

		pDim->AppendPoint(ptSta);
		pDim->AppendPoint(ptEnd);

		pDim->SetDimupdownSpace(dDn);
		pDim->SetTextLayerId(idDimLay);

		AcDbVoidPtrArray arSubPtrs;
		pDim->explode(arSubPtrs);
		delete pDim;

		if (arSubPtrs.length() == 1)
		{
			AcDbText *pText = (AcDbText *)arSubPtrs.first();
			double dOb = m_xform.GetISOOblique(vtDir);
			pText->setLayer(m_idDimlay);
			pText->setTextStyle(m_idDimSty);
			if (m_bDimTxtIso)
			{
				pText->setOblique(dOb);
			}
			AddISOEnt(pText);
		}
	}
}
void AecISODrawMake::MakeEDim3(AecDbObjXDataMap *pXDataMap, AcGePoint3d ptSta, AcGePoint3d ptEnd, TCHAR *pszLay, double dPipeWD)
{
	int nUnit = 1;
	bool bDimPipeEl = false;
	double dEl = 0.0;
	dEl = (ptSta.z - 0.0) / nUnit - m_dRefEl / nUnit;
	AcGeVector3d vtDir = ptEnd - ptSta;
	AcGeLine3d ln3d;
	ln3d.set(ptSta, ptEnd);
	if (AcGePlane::kXYPlane.isParallelTo(ln3d) && m_bDimPipeEl)
	{
		bDimPipeEl = true;
	}

	int nUnitDrw = 1;//默认毫米
	struct resbuf rb;
	acedGetVar(_T("INSUNITS"), &rb);
	if (rb.resval.rint == AcDb::kUnitsMeters)
	{
		nUnitDrw = 1000;
	}

	int nApp = 0;
	pXDataMap->GetAt(KEY_APP, nApp);
	WPipe::EApp eApp = (WPipe::EApp)nApp;
	if (eApp == WPipe::eBridge)
	{
		CString sDimUp, sDimDwn, sNo, sType;

		int nType = 0;
		pXDataMap->GetAt(KEY_SECSHAPE, nType);
		ESection eType = (ESection)nType;

		AecHvac::DuctParam data;
		memset(&data, 0, sizeof(AecHvac::DuctParam));

		switch (eType)
		{
		case eRect:
		{
			sType = _T("");
			pXDataMap->GetAt(KEY_TYPE, sType);

			sNo = _T("");
			pXDataMap->GetAt(KEY_TYPE, sNo);

			pXDataMap->GetAt(KEY_SIZE1, data.dSize[0]); //L
			pXDataMap->GetAt(KEY_SIZE2, data.dSize[1]); //w

			if (bDimPipeEl)
			{
				double dBomEl = ptSta.z;
				dBomEl -= 0.5 * data.dSize[1];
				dBomEl /= nUnitDrw;//米单位

				sDimUp.Format(_T("%dx%d"), (int)(data.dSize[0] + 0.5), (int)(data.dSize[1] + 0.5));
			}
			else
			{
				sDimUp.Format(_T("%%dx%d"),(int)(data.dSize[0] + 0.5), (int)(data.dSize[1] + 0.5));
			}
		}
		case eCircle:
		{
			double dBomEl = ptSta.z;
			dBomEl /= nUnitDrw;

			pXDataMap->GetAt(KEY_SIZE1, data.dSize[0]); //D

			if (bDimPipeEl)
			{
				sDimUp.Format(_T("D%d"), (int)(data.dSize[0] + 0.5));
			}
			else
			{
				sDimUp.Format(_T("D%d"),(int)(data.dSize[0] + 0.5));
			}
		}
		default:
			break;
		}

		if (!m_bWasDone)
		{
			m_xform.GetTransformByThis(ptSta);
			m_xform.GetTransformByThis(ptEnd);
		}

		AecDbObjXDataMap xDataMap;
		if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap)) return;

		AcGePoint3d ptGeOn = ptSta;
		Midpoint(ptSta, ptEnd, ptGeOn);

		double dDn = 0.0;
		pXDataMap->GetAt(PIPE_DN, dDn);

		vtDir.normalize();

		if (vtDir.isParallelTo(AcGeVector3d::kYAxis))
		{
			vtDir = AcGeVector3d::kYAxis;
		}

		if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
		{
			vtDir = AcGeVector3d::kXAxis;
		}

		AcGeVector3d vtV = vtDir;
		if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)//第2象限
		{
			vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
			vtDir *= -1.0;//转到第4象限
		}
		else if (vtDir.x < -1.e-10 && vtDir.y < -1.e-10)//第3象限
		{
			vtDir.negate();//转道第1象限
			vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
		}
		else
		{
			vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
		}

		ptGeOn += vtV * dPipeWD * 2.0; //

		AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
		AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);

		AecDbEwPipeDim *pDim = new AecDbEwPipeDim;
		pDim->SetDimStyle(1);
		pDim->SetDimDir(0);
		pDim->SetDimTextUporDownFlag(1);
		pDim->SetTextStyleId(idTSty);
		pDim->SetTextLayerId(idDimLay);
		pDim->setLayer(idDimLay);
		sDimUp.TrimLeft();
		sDimDwn.TrimLeft();
		if (sDimUp.IsEmpty() && sDimDwn.IsEmpty())
		{
			delete pDim;
			return;
		}

		pDim->AddDimText(sDimUp, sDimDwn);

		double dTxtH = m_dTxtH, dTxWS = 1.0;
		//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
		xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

		pDim->SetPScale(m_dScale);
		pDim->SetTextHeight(dTxtH);
		pDim->SetTextWidthScale(dTxWS);

		vtDir = ptEnd - ptSta;
		vtDir /= 10.0;
		ptSta += vtDir;

		pDim->AppendPoint(ptSta);
		pDim->AppendPoint(ptEnd);

		pDim->SetDimupdownSpace(dDn);
		pDim->SetTextLayerId(idDimLay);

		AcDbVoidPtrArray arSubPtrs;
		pDim->explode(arSubPtrs);
		delete pDim;

		if (arSubPtrs.length() == 1)
		{
			AcDbText *pText = (AcDbText *)arSubPtrs.first();
			double dOb = m_xform.GetISOOblique(vtDir);
			pText->setLayer(m_idDimlay);
			pText->setTextStyle(m_idDimSty);

			if (m_bDimTxtIso)
			{
				pText->setOblique(dOb);
			}
			AddISOEnt(pText);
		}
	}
	else if (eApp == WPipe::eTrench)
	{
		CString sDimUp, sDimDwn, sNo, sType, sKey;

		AecHvac::DuctParam data;
		memset(&data, 0, sizeof(AecHvac::DuctParam));

		pXDataMap->GetAt(KEY_WELLW, data.dSize[4]);

		sKey.Format(_T("%s_%d"), KEY_SIZE, 5);
		pXDataMap->GetAt(sKey, data.dSize[5]);

		sType = _T("");
		pXDataMap->GetAt(KEY_TYPE, sType);

		sNo = _T("");
		pXDataMap->GetAt(KEY_TYPE, sNo);

		if (bDimPipeEl)
		{
			double dTopEl = ptSta.z;
			dTopEl += 0.5 * data.dSize[1];
			dTopEl /= nUnitDrw;

			sDimUp.Format(_T("%s-%s %dx%d顶%.3fm"), sType, sNo, (int)(data.dSize[4] + 0.5), (int)(data.dSize[5] + 0.5), dTopEl);
		}
		else
		{
			sDimUp.Format(_T("%s-%s %dx%d"), sType, sNo, (int)(data.dSize[4] + 0.5), (int)(data.dSize[5] + 0.5));
		}

		if (!m_bWasDone)
		{
			m_xform.GetTransformByThis(ptSta);
			m_xform.GetTransformByThis(ptEnd);
		}

		AecDbObjXDataMap xDataMap;
		if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap)) return;

		AcGePoint3d ptGeOn = ptSta;
		Midpoint(ptSta, ptEnd, ptGeOn);

		double dDn = 0.0;
		pXDataMap->GetAt(PIPE_DN, dDn);

		vtDir.normalize();

		if (vtDir.isParallelTo(AcGeVector3d::kYAxis))
		{
			vtDir = AcGeVector3d::kYAxis;
		}

		if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
		{
			vtDir = AcGeVector3d::kXAxis;
		}

		AcGeVector3d vtV = vtDir;
		if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)//第2象限
		{
			vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
			vtDir *= -1.0;//转到第4象限
		}
		else if (vtDir.x < -1.e-10 && vtDir.y < -1.e-10)//第3象限
		{
			vtDir.negate();//转道第1象限
			vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
		}
		else
		{
			vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
		}

		ptGeOn += vtV * dPipeWD * 2.0; //

		AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
		AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);

		AecDbEwPipeDim *pDim = new AecDbEwPipeDim;
		pDim->SetDimStyle(1);
		pDim->SetDimDir(0);
		pDim->SetDimTextUporDownFlag(1);
		pDim->SetTextStyleId(idTSty);
		pDim->SetTextLayerId(idDimLay);
		pDim->setLayer(idDimLay);
		sDimUp.TrimLeft();
		sDimDwn.TrimLeft();
		if (sDimUp.IsEmpty() && sDimDwn.IsEmpty())
		{
			delete pDim;
			return;
		}

		pDim->AddDimText(sDimUp, sDimDwn);

		double dTxtH = m_dTxtH, dTxWS = 1.0;
		//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
		xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

		pDim->SetPScale(m_dScale);
		pDim->SetTextHeight(dTxtH);
		pDim->SetTextWidthScale(dTxWS);

		vtDir = ptEnd - ptSta;
		vtDir /= 10.0;
		ptSta += vtDir;

		pDim->AppendPoint(ptSta);
		pDim->AppendPoint(ptEnd);

		pDim->SetDimupdownSpace(dDn);
		pDim->SetTextLayerId(idDimLay);

		AcDbVoidPtrArray arSubPtrs;
		pDim->explode(arSubPtrs);
		delete pDim;

		if (arSubPtrs.length() == 1)
		{
			AcDbText *pText = (AcDbText *)arSubPtrs.first();
			double dOb = m_xform.GetISOOblique(vtDir);
			pText->setLayer(m_idDimlay);
			pText->setTextStyle(m_idDimSty);

			if (m_bDimTxtIso)
			{
				pText->setOblique(dOb);
			}
			AddISOEnt(pText);
		}
	}
}

void AecISODrawMake::MakeHDim2(AecDbObjXDataMap* pXDataMap,AcGePoint3d ptSta,AcGePoint3d ptEnd,TCHAR* pszLay,double dPipeWD)
{
	int nUnit = 1;
	bool bDimPipeEl = false;
	double dEl = 0.0;
	dEl = (ptSta.z - 0.0) / nUnit - m_dRefEl / nUnit;
	AcGeVector3d vtDir = ptEnd - ptSta;
	AcGeLine3d ln3d;
	ln3d.set(ptSta, ptEnd);
	if (AcGePlane::kXYPlane.isParallelTo(ln3d) && m_bDimPipeEl)
	{
		bDimPipeEl = true;
	}

	int nUnitDrw = 1;//默认毫米
	struct resbuf rb;
	acedGetVar(_T("INSUNITS"), &rb);
	if (rb.resval.rint == AcDb::kUnitsMeters)
	{
		nUnitDrw = 1000;
	}

	AecDbObjXDataMap xDataMap;
	if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT,xDataMap)) return;

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptSta);
		m_xform.GetTransformByThis(ptEnd);
	}

	AcGePoint3d ptGeOn;
	Midpoint(ptSta, ptEnd, ptGeOn);

	if (vtDir.isParallelTo(AcGeVector3d::kYAxis))
		vtDir = AcGeVector3d::kYAxis;

	if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
		vtDir = AcGeVector3d::kXAxis;

	AcGeVector3d vtV = vtDir;
	if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)//第2象限
	{
		vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
		vtDir *= -1.0;//转到第4象限
	}
	else if (vtDir.x < -1.e-10 && vtDir.y < -1.e-10)//第3象限
	{
		vtDir.negate();//转道第1象限
		vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
	}
	else
	{
		vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
	}

	ptGeOn += vtV * dPipeWD * 2.0; //

	int nType = 0;
	pXDataMap->GetAt(KEY_SECSHAPE,nType);

	AecHvac::DuctParam data;
	memset(&data,0,sizeof(AecHvac::DuctParam));

	CString sDimUp,sDimDwn, sType,sNo;

	sType = _T("");
	pXDataMap->GetAt(KEY_TYPE, sType);

	sNo = _T("");
	pXDataMap->GetAt(KEY_TYPE, sNo);

	ESection eType = (ESection)nType;
	switch(eType)
	{
	case eRect:
		{
			pXDataMap->GetAt(KEY_SIZE1,data.dSize[0]); //L
			pXDataMap->GetAt(KEY_SIZE2,data.dSize[1]); //w
			pXDataMap->GetAt(PIPE_THICK,data.dSize[2]);//t

			if (bDimPipeEl)
			{
				double dBomEl = ptSta.z;
				dBomEl -= 0.5 * data.dSize[1];
				dBomEl /= nUnitDrw;//米单位

				sDimUp.Format(_T("风管%s-%s %dx%dt=%.1f底%.3fm"), sType, sNo, (int)(data.dSize[0] + 0.5), (int)(data.dSize[1] + 0.5), data.dSize[2], dBomEl);
			}
			else
			{
				sDimUp.Format(_T("风管%s-%s %dx%dt=%.1f"), sType, sNo, (int)(data.dSize[0] + 0.5), (int)(data.dSize[1] + 0.5), data.dSize[2]);
			}
			break;
		}
	case eCircle:
		{
			pXDataMap->GetAt(KEY_SIZE1,data.dSize[0]); //D
			data.dSize[1] = 0.0;
			pXDataMap->GetAt(PIPE_THICK,data.dSize[2]);//t

			double dBomEl = ptSta.z;
			dBomEl /= nUnitDrw;

			if (bDimPipeEl)
			{
				sDimUp.Format(_T("风管%s-%s D%dt=%.1f中%.3fm"), sType, sNo, (int)(data.dSize[0] + 0.5), data.dSize[2], dBomEl);
			}
			else
			{
				sDimUp.Format(_T("风管%s-%s D%dt=%.1f"), sType, sNo, (int)(data.dSize[0] + 0.5), data.dSize[2]);
			}

			break;
		}
	case eOblate:
		{
			break;
		}
	default:
		break;
	}

	AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
	AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);

	AecDbEwPipeDim* pDim = new AecDbEwPipeDim;
	pDim->SetDimStyle(1);
	pDim->SetDimDir(0);
	pDim->SetDimTextUporDownFlag(0);
	pDim->SetTextStyleId(idTSty);
	pDim->SetTextLayerId(idDimLay);
	pDim->setLayer(idDimLay);
	sDimUp.TrimLeft();
	sDimDwn.TrimLeft();
	pDim->AddDimText(sDimUp, sDimDwn);

	double dTxtH = m_dTxtH, dTxWS = 1.0;
	//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
	xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

	pDim->SetPScale(m_dScale);
	pDim->SetTextHeight(dTxtH);
	pDim->SetTextWidthScale(dTxWS);

	vtDir = ptEnd - ptSta;
	vtDir /= 10.0;
	ptSta += vtDir;

	pDim->AppendPoint(ptSta);
	pDim->AppendPoint(ptEnd);

	pDim->SetDimupdownSpace(data.dSize[0]);
	pDim->SetTextLayerId(idDimLay);

	AcDbVoidPtrArray arSubPtrs;
	pDim->explode(arSubPtrs);
	delete pDim;

	if (arSubPtrs.length() == 1)
	{
		AcDbText* pText = (AcDbText*)arSubPtrs.first();
		double dOb = m_xform.GetISOOblique(vtDir);
		pText->setTextStyle(m_idDimSty);
		pText->setLayer(m_idDimlay);

		if (m_bDimTxtIso)
			pText->setOblique(dOb);

		AddISOEnt(pText);
	}
}

void AecISODrawMake::MakeHDim3(AecDbObjXDataMap *pXDataMap, AcGePoint3d ptSta, AcGePoint3d ptEnd, TCHAR *pszLay, double dPipeWD)
{
	int nUnit = 1;
	bool bDimPipeEl = false;
	double dEl = 0.0;
	dEl = (ptSta.z - 0.0) / nUnit - m_dRefEl / nUnit;
	AcGeVector3d vtDir = ptEnd - ptSta;
	AcGeLine3d ln3d;
	ln3d.set(ptSta, ptEnd);
	if (AcGePlane::kXYPlane.isParallelTo(ln3d) && m_bDimPipeEl)
	{
		bDimPipeEl = true;
	}

	int nUnitDrw = 1;//默认毫米
	struct resbuf rb;
	acedGetVar(_T("INSUNITS"), &rb);
	if (rb.resval.rint == AcDb::kUnitsMeters)
	{
		nUnitDrw = 1000;
	}

	AecDbObjXDataMap xDataMap;
	if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap)) return;

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptSta);
		m_xform.GetTransformByThis(ptEnd);
	}

	AcGePoint3d ptGeOn;
	Midpoint(ptSta, ptEnd, ptGeOn);

	if (vtDir.isParallelTo(AcGeVector3d::kYAxis))
		vtDir = AcGeVector3d::kYAxis;

	if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
		vtDir = AcGeVector3d::kXAxis;

	AcGeVector3d vtV = vtDir;
	if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)//第2象限
	{
		vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
		vtDir *= -1.0;//转到第4象限
	}
	else if (vtDir.x < -1.e-10 && vtDir.y < -1.e-10)//第3象限
	{
		vtDir.negate();//转道第1象限
		vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
	}
	else
	{
		vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
	}

	ptGeOn += vtV * dPipeWD * 2.0; //

	int nType = 0;
	pXDataMap->GetAt(KEY_SECSHAPE, nType);

	AecHvac::DuctParam data;
	memset(&data, 0, sizeof(AecHvac::DuctParam));

	CString sDimUp, sDimDwn, sType, sNo;

	sType = _T("");
	pXDataMap->GetAt(KEY_TYPE, sType);

	sNo = _T("");
	pXDataMap->GetAt(KEY_TYPE, sNo);

	ESection eType = (ESection)nType;
	switch (eType)
	{
	case eRect:
	{
		pXDataMap->GetAt(KEY_SIZE1, data.dSize[0]); //L
		pXDataMap->GetAt(KEY_SIZE2, data.dSize[1]); //w
		pXDataMap->GetAt(PIPE_THICK, data.dSize[2]);//t

		if (bDimPipeEl)
		{
			double dBomEl = ptSta.z;
			dBomEl -= 0.5 * data.dSize[1];
			dBomEl /= nUnitDrw;//米单位

			sDimUp.Format(_T("风管%dx%d"), (int)(data.dSize[0] + 0.5), (int)(data.dSize[1] + 0.5));
		}
		else
		{
			sDimUp.Format(_T("风管%dx%d"),(int)(data.dSize[0] + 0.5), (int)(data.dSize[1] + 0.5));
		}
		break;
	}
	case eCircle:
	{
		pXDataMap->GetAt(KEY_SIZE1, data.dSize[0]); //D
		data.dSize[1] = 0.0;
		pXDataMap->GetAt(PIPE_THICK, data.dSize[2]);//t

		double dBomEl = ptSta.z;
		dBomEl /= nUnitDrw;

		if (bDimPipeEl)
		{
			sDimUp.Format(_T("风管D%d"), (int)(data.dSize[0] + 0.5));
		}
		else
		{
			sDimUp.Format(_T("风管D%d"), (int)(data.dSize[0] + 0.5));
		}

		break;
	}
	case eOblate:
	{
		break;
	}
	default:
		break;
	}

	AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
	AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(PipelineTools::gTextStyle_Pipe_Dim);

	AecDbEwPipeDim *pDim = new AecDbEwPipeDim;
	pDim->SetDimStyle(1);
	pDim->SetDimDir(0);
	pDim->SetDimTextUporDownFlag(0);
	pDim->SetTextStyleId(idTSty);
	pDim->SetTextLayerId(idDimLay);
	pDim->setLayer(idDimLay);
	sDimUp.TrimLeft();
	sDimDwn.TrimLeft();
	pDim->AddDimText(sDimUp, sDimDwn);

	double dTxtH = m_dTxtH, dTxWS = 1.0;
	//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
	xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

	pDim->SetPScale(m_dScale);
	pDim->SetTextHeight(dTxtH);
	pDim->SetTextWidthScale(dTxWS);

	vtDir = ptEnd - ptSta;
	vtDir /= 10.0;
	ptSta += vtDir;

	pDim->AppendPoint(ptSta);
	pDim->AppendPoint(ptEnd);

	pDim->SetDimupdownSpace(data.dSize[0]);
	pDim->SetTextLayerId(idDimLay);

	AcDbVoidPtrArray arSubPtrs;
	pDim->explode(arSubPtrs);
	delete pDim;

	if (arSubPtrs.length() == 1)
	{
		AcDbText *pText = (AcDbText *)arSubPtrs.first();
		double dOb = m_xform.GetISOOblique(vtDir);
		pText->setTextStyle(m_idDimSty);
		pText->setLayer(m_idDimlay);
		if (m_bDimTxtIso)
			pText->setOblique(dOb);

		AddISOEnt(pText);
	}
}

void AecISODrawMake::MakeDim3(AecDbObjXDataMap* pXDataMap,AcGePoint3d ptSta,AcGePoint3d ptEnd,TCHAR* pszLay,double dPipeWD,BOOL bTextISO)
{
	if (!CoreTools::hasCSSZ(true)) return;
	CUIISQLiteServer Db;
	if (!PipelineTools::getSqliteDB(_T("Plumbing.db"), Db))
	{
		AfxMessageBox(_T("未找到数据库文件Plumbing.db,请重新安装！"));
		return;
	}

	AecDbObjXDataMap xDataMap;
	if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT,xDataMap))
		return;

	double dDn = 0.0,dOD = 0.0, dt = 0.0;
	CString sDimUp,sDimDwn = _T("");
	if (!pXDataMap->GetAt(PIPE_DN, dDn))
	{
		pXDataMap->GetAt(KEY_NAME, sDimUp);
	}
	else
	{
		sDimUp.Format(_T("DN%d"),(int)(dDn + 0.5));
	}

	//OD
	if (this->m_bODxtDim)
	{
		if (!pXDataMap->GetAt(PIPE_OD, dDn))
		{
			pXDataMap->GetAt(KEY_NAME, sDimUp);
		}
		else
		{
			pXDataMap->GetAt(PIPE_THICK, dt);
			sDimUp.Format(_T("%dx%.1f"), (int)(dDn + 0.5), dt);
		}
	}

	sDimDwn = _T("");//上

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptSta);
		m_xform.GetTransformByThis(ptEnd);
	}

	AcGePoint3d ptGeOn = ptEnd;
	//Midpoint(ptSta, ptEnd, ptGeOn);

	AcGeVector3d vtDir = ptEnd - ptSta;
	vtDir.normalize();

	double dLen = ptEnd.distanceTo(ptSta);
	//ptGeOn -= vtDir * dLen * 0.25;//1/4
	ptGeOn = MidPoint(ptSta, ptEnd);

	if (vtDir.isParallelTo(AcGeVector3d::kYAxis))
		vtDir = AcGeVector3d::kYAxis;

	if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
		vtDir = AcGeVector3d::kXAxis;

	bool bNegate = false;
	AcGeVector3d vtV = vtDir;
	if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)//第2象限
	{
		vtV.rotateBy(-PI / 2.0, AcGeVector3d::kZAxis);
		vtDir *= -1.0;//转到第4象限
	}
	else if (vtDir.x < -1.e-10 && vtDir.y < -1.e-10)//第3象限
	{
		vtDir.negate();//转道第1象限
		vtV = vtDir;
		vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
		bNegate = true;
	}
	else//I IV 第1,4象限
	{
		vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
	}

	ptGeOn += vtV * dPipeWD * 2.0; //

	AecDbEwPipeDim* pDim = new AecDbEwPipeDim;
	//pDim->AddAecDbWEntity(id1);
	pDim->SetDimStyle(1);
	pDim->SetDimDir(0);
	pDim->SetDimTextUporDownFlag(1);
	pDim->SetTextStyleId(m_idDimSty);
	pDim->setLayer(m_idDimlay);

	sDimUp.TrimLeft();
	sDimDwn.TrimLeft();
	if (sDimUp.IsEmpty() && sDimDwn.IsEmpty())
	{
		delete pDim;
		return;
	}

	pDim->AddDimText(sDimUp, sDimDwn);

	double dTxtH = m_dTxtH, dTxWS = 1.0;
	//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
	xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

	CString sDimupScr, sDimupScrTrue;
	xDataMap.GetAt(DOC_SCRIPTT, sDimupScr);
	CWPipeDimConfigDlg::PipeScript2Detail(sDimupScr, sDimupScrTrue);
	pDim->SetDimupScript(sDimupScrTrue);

	CString sDimdwScr, sDimdwScrTrue;
	xDataMap.GetAt(DOC_SCRIPTB, sDimdwScr);
	CWPipeDimConfigDlg::PipeScript2Detail(sDimdwScr, sDimdwScrTrue);
	pDim->SetDimdownScript(sDimdwScrTrue);

	pDim->SetPScale(m_dScale);
	pDim->SetTextHeight(dTxtH);
	pDim->SetTextWidthScale(dTxWS);

	AcGePoint3d ptTmp;
	if (bNegate)
	{
		ptTmp = ptEnd;
		ptEnd = ptSta;
		ptSta = ptTmp;
	}

	vtDir = ptEnd - ptSta;
	if (vtDir.isParallelTo(AcGeVector3d::kXAxis))
	{
		if (!vtDir.isCodirectionalTo(AcGeVector3d::kXAxis))
		{
			ptTmp = ptEnd;
			ptEnd = ptSta;
			ptSta = ptTmp;
			vtDir.negate();
		}
	}

	if (vtDir.x < -1.e-10 && vtDir.y > 1.e-10)
	{
		ptTmp = ptEnd;
		ptEnd = ptSta;
		ptSta = ptTmp;
		vtDir.negate();
	}

	vtDir /= 3.0;
	ptSta += vtDir;

	pDim->AppendPoint(ptSta);
	pDim->AppendPoint(ptEnd);
	
	pDim->SetDimupdownSpace(dDn);
	pDim->SetTextLayerId(m_idDimSty);

	AcDbVoidPtrArray arSubPtrs;
	pDim->explode(arSubPtrs);
	delete pDim;

	if (arSubPtrs.length() == 1)
	{
		AcDbText* pText = (AcDbText*)arSubPtrs.first();
		if (bTextISO)
		{
			double dOb = m_xform.GetISOOblique(vtDir);
			pText->setOblique(dOb);
		}
		pText->setTextStyle(m_idDimSty);
		pText->setLayer(m_idDimlay);
		AddISOEnt(pText);
	}
}

double AecISODrawMake::UnderLineLength(LPCTSTR pszDimup ) const
{
	AcGiTextStyle giTxtStyle;
	fromAcDbTextStyle(giTxtStyle, m_idDimSty);

	giTxtStyle.setTextSize(m_dTxtH * m_dScale);
	giTxtStyle.setXScale(m_dWFact);

	CString sDimup = pszDimup;
	int nLen = sDimup.GetLength();
	AcGePoint2d pt2d = giTxtStyle.extents(sDimup, Adesk::kFalse, nLen, Adesk::kTrue);

	return pt2d.x;
}

void AecISODrawMake::MakeDim4(AcGePoint3d ptPos, AcGeVector3d vtDir, double dRefEl,const AcDbObjectId& idLay)
{
	AcGeVector3d vtOff = vtDir;
	vtOff.normalize();
	vtOff *= m_dDimoffset * m_dScale;

	double dEl = ptPos.z - dRefEl;
	//标高按米单位
	dEl /= 1000.0;

	CString sDimTxt;
	sDimTxt.Format(_T("%.3f"), dEl);
	double dTxtLen = UnderLineLength(sDimTxt);

	AcGeVector3d vtOffEl = 1.1 * vtOff;
	if (m_bElStyle > 0)
	{
		vtOffEl.normalize();
		vtOffEl *= (dTxtLen + 1.1 * vtOff.length());
	}

	AcGePoint3d ptGe[5];
	ptGe[4] = ptPos + vtOffEl;

	//标高标注
	vtOff.normalize();
	vtOff *= 2.0 * m_dDimoffset * m_dScale;

	ptGe[0] = ptPos + vtOff;
	ptGe[1] = ptGe[0] + vtOff;

	AecDbObjXDataMap xDataMap;
	KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap);

	double dTxtH = m_dTxtH, dTxWS = 1.0;
	//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
	xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptGe[0]);
		m_xform.GetTransformByThis(ptGe[1]);
	}

	ptGe[2] = MidPoint(ptGe[0], ptGe[1]);	
	AcGeVector3d vtIso = ptGe[1] - ptGe[0];
	vtIso.normalize();

	AcGeVector3d vtIsoV = vtIso;
	vtIsoV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
	vtIsoV.normalize();

	if (vtIsoV.y < -1.e-10)
		vtIsoV.negate();

	double dL = 1.732 * m_dTxtH * m_dScale;

	ptGe[1] = ptGe[2] + vtIsoV * m_dTxtH * m_dScale;
	ptGe[1] -= vtIso * 0.5 * dL;
	ptGe[3] = ptGe[1] + vtIso * dL;

	ptGe[0] = ptGe[1] + vtIso * (dTxtLen + dL);
	ptGe[0] = ptGe[3];
	ptGe[3] += vtIsoV * 0.2 * m_dTxtH * m_dScale;

	double dRo = m_xform.GetISORotation(vtIso);
	AcDbText *pText = NULL;
	
	if (m_bElStyle == 0)
	{
		pText = new AcDbText;
		pText->setPosition(ptGe[3]);

		pText->setRotation(dRo);

		pText->setHeight(m_dTxtH * m_dScale);
		pText->setWidthFactor(m_dWFact);
		pText->setNormal(AcGeVector3d::kZAxis);
		pText->setHorizontalMode(AcDb::kTextLeft);
		pText->setVerticalMode(AcDb::kTextBottom);
		pText->setAlignmentPoint(ptGe[3]);
		sDimTxt.TrimRight(_T('0'));
		if (sDimTxt.CompareNoCase(_T("0.")) == 0)
			sDimTxt = _T("0");
		pText->setTextString(sDimTxt);
		pText->setTextStyle(m_idDimSty);
		pText->setLayer(m_idDimlay);

		AddISOEnt(pText);
	}

	//有尾标高符号线
	vtIso = AcGeVector3d::kXAxis;
	vtIso.rotateBy(dRo, AcGeVector3d::kZAxis);

	ptGe[1] = ptGe[0] + vtIso * (dTxtLen + dL);
	ptGe[2] = ptGe[1] - vtIso * 0.5 * dL;
	ptGe[2] -= vtIsoV * m_dTxtH * m_dScale;
	ptGe[3] = ptGe[1] - vtIso *dL;

	if (m_bElStyle)
		ptGe[0] = ptGe[3];

	AcDbPolyline *pPoly = NULL;
	if (m_bElStyle == 0)
	{
		pPoly = new AcDbPolyline;
		for (int i = 0; i < 4; i++)
		{
			pPoly->addVertexAt(i, ptGe[i].convert2d(AcGePlane::kXYPlane));
		}

		pPoly->setConstantWidth(0);
		pPoly->setLayer(m_idDimlay);
		pPoly->setLinetype(KTSetting::InitLineStyle(_T("Continuous")));
		pPoly->setNormal(AcGeVector3d::kZAxis);

		AddISOEnt(pPoly);
	}
	
	//底线
	AcGePoint3dArray arLn;
	ptGe[2] -= vtIso * dL;
	arLn.append(ptGe[2]);

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptGe[4]);
		arLn.append(ptGe[4]);
	}

	AcGeVector3d vt = ptGe[2] - ptGe[4];
	if (vt.isCodirectionalTo(vtIso))
	{
		ptGe[2] = ptGe[1] - vtIsoV * m_dTxtH * m_dScale;
		arLn.append(ptGe[2]);
	}
	AcDbLine lnUnder(ptGe[2],ptGe[4]);

	if (m_bElStyle == 1)
	{
		ptGe[2] += vtIsoV * 0.2 * m_dTxtH * m_dScale;
		pText = new AcDbText;
		pText->setPosition(ptGe[2]);

		pText->setRotation(dRo);

		pText->setHeight(m_dTxtH * m_dScale);
		pText->setWidthFactor(m_dWFact);
		pText->setNormal(AcGeVector3d::kZAxis);
		pText->setHorizontalMode(AcDb::kTextLeft);
		pText->setVerticalMode(AcDb::kTextBottom);
		pText->setAlignmentPoint(ptGe[2]);
		sDimTxt.TrimRight(_T('0'));
		if (sDimTxt.CompareNoCase(_T("0.")) == 0)
			sDimTxt = _T("0");
		pText->setTextString(sDimTxt);
		pText->setTextStyle(m_idDimSty);
		pText->setLayer(m_idDimlay);

		AddISOEnt(pText);

		ptGe[0] = ptGe[2] - 0.2 * m_dTxtH * m_dScale * vtIso;
		ptGe[0] -= 0.5 * dL * vtIso;

		ptGe[1] = ptGe[0] + vtIsoV * m_dTxtH * m_dScale;
		ptGe[1] -= 0.5 * dL * vtIso;

		ptGe[2] = ptGe[1] + dL * vtIso;
		ptGe[3] = ptGe[0];

		pPoly = new AcDbPolyline;
		for (int i = 0; i < 4; i++)
		{
			pPoly->addVertexAt(i, ptGe[i].convert2d(AcGePlane::kXYPlane));
		}

		pPoly->setConstantWidth(0);
		pPoly->setLayer(m_idDimlay);
		pPoly->setLinetype(KTSetting::InitLineStyle(_T("Continuous")));
		pPoly->setNormal(AcGeVector3d::kZAxis);

		AddISOEnt(pPoly);

		ptGe[1] -= vtIsoV * 1.2 * m_dTxtH * m_dScale;
		arLn.append(ptGe[1]);

		ptGe[2] -= vtIsoV * 1.2 * m_dTxtH * m_dScale;
		arLn.append(ptGe[2]);
	}

	//底线
	SortPoints(arLn, &lnUnder);

	pPoly = new AcDbPolyline;
	pPoly->addVertexAt(0, arLn.first().convert2d(AcGePlane::kXYPlane));
	pPoly->addVertexAt(1, arLn.last().convert2d(AcGePlane::kXYPlane));
	pPoly->setConstantWidth(0);
	pPoly->setLayer(m_idDimlay);
	pPoly->setLinetype(KTSetting::InitLineStyle(_T("Continuous")));
	pPoly->setNormal(AcGeVector3d::kZAxis);
	AddISOEnt(pPoly);
}

int AecISODrawMake::AddISOEnt(AcDbEntity* pEnt)
{
	int nIndex = m_arISOEntPtrs.append(pEnt);
	return nIndex;
}

AcDbText *AecISODrawMake::MakeDimText(AcGePoint3d ptSta, AcGePoint3d ptEnd, AcGePoint3d ptMid, AcDbObjectId &idSty, double dH,CString &sText)
{
	AcGeVector3d vt1 = ptEnd - ptSta;
	double dRo = m_xform.GetISORotation(vt1);
	double dOb = m_xform.GetISOOblique(vt1);

	if (sText.IsEmpty())
	{
		sText.Format(_T("%d"), (int)ptSta.distanceTo(ptEnd));
	}

	AcDbText *pText = new AcDbText;
	pText->setPosition(ptMid);
	pText->setRotation(dRo);

	if (m_bDimTxtIso)
		pText->setOblique(dOb);

	pText->setHeight(dH * m_dScale);
	pText->setWidthFactor(m_dWFact);
	pText->setNormal(AcGeVector3d::kZAxis);
	pText->setHorizontalMode(AcDb::kTextMid);
	pText->setVerticalMode(AcDb::kTextVertMid);
	pText->setTextString(sText);
	pText->setAlignmentPoint(ptMid);
	pText->setTextStyle(m_idDimSty);
	pText->setLayer(m_idDimlay);
	return pText;
}

AcDbText* AecISODrawMake::MakeDimText(AcGePoint3d ptSta,AcGePoint3d ptEnd,double dH,AcDbObjectId& idSty,CString& sText)
{
	AcGeVector3d vt1 = ptEnd - ptSta;
	double dRo = m_xform.GetISORotation(vt1);
	double dOb = m_xform.GetISOOblique(vt1);

	if (sText.IsEmpty())
	{
		sText.Format(_T("%d"),(int)ptSta.distanceTo(ptEnd));
	}

	AcGePoint3d ptMid;
	Midpoint(ptSta,ptEnd,ptMid);

	if (vt1.isParallelTo(AcGeVector3d::kXAxis))//X
	{
		ptMid.y += (dH * m_dScale);//半个字高间隙
	}
	else if (vt1.isParallelTo(AcGeVector3d::kYAxis))//Y
	{
		ptMid.x -= (dH * m_dScale);//半个字高间隙
	}
	else
	{
		if (vt1.x > 1.e-10 && vt1.y > 1.e-10) //I
		{
			vt1.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vt1.normalize();
			ptMid += (dH * m_dScale * vt1);
		}

		if (vt1.x < 1.e-10 && vt1.y > 1.e-10) //II
		{
			vt1.rotateBy(-PI / 2.0,AcGeVector3d::kZAxis);
			vt1.normalize();
			ptMid += (dH * m_dScale * vt1);
		}

		if (vt1.x < 1.e-10 && vt1.y < 1.e-10) //III==I
		{
			vt1.rotateBy(-PI / 2.0,AcGeVector3d::kZAxis);
			vt1.normalize();
			ptMid += (dH * m_dScale * vt1);
		}

		if (vt1.x > 1.e-10 && vt1.y < 1.e-10) //IV==II
		{
			vt1.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vt1.normalize();
			ptMid += (dH * m_dScale * vt1);
		}
	}


	AcDbText* pText = new AcDbText;
	pText->setPosition(ptMid);
	pText->setRotation(dRo);

	if (m_bDimTxtIso)
		pText->setOblique(dOb);

	pText->setHeight(dH * m_dScale);
	pText->setWidthFactor(m_dWFact);
	pText->setNormal(AcGeVector3d::kZAxis);
	pText->setHorizontalMode(AcDb::kTextMid);
	pText->setVerticalMode(AcDb::kTextVertMid);
	pText->setTextString(sText);
	pText->setAlignmentPoint(ptMid);
	pText->setTextStyle(m_idDimSty);
	pText->setLayer(m_idDimlay);
	return pText;
}

void AecISODrawMake::MakeISOFittingFlange(AecDbEwFitting* pFitting, double dPlotPipeW, double dPlotDotD, int nPipeDim, int nFitDim, BOOL bElbowLine, BOOL bWelDot, BOOL bVlvISOV)
{
	if (pFitting == NULL)
		return;

	if (m_bFitFGHide)
		return;

	AecDbObjXDataMap *pXDataMap = pFitting->GetSpecialtyData(AcDb::kForRead);

	int nConnectType = 0;//焊接0 承插1 螺纹2 法兰管3
	pXDataMap->GetAt(PIPE_CONNECT, nConnectType);

	AcGeVector3d vtV;
	AcGePoint3d ptGe[6];
	CString sKey, sGasketInf, sDimtext, sSpec, sMat, sRem,sLevel, sBoltInfs;
	CStringArray arVals;
	int nIndex = -1, nCountAdd = 1;

	AcArray<AecInterface> arInfs;
	pFitting->GetInterface(arInfs);

	for (int i = 0; i < arInfs.length(); i++)
	{
		AecInterface &inf = arInfs.at(i);
		ptGe[0] = inf.ptPos;


		//如果是衬塑管,放大间隙



		AcGeVector3d vtDir = inf.vtDir;

		vtV = vtDir;
		if (vtDir.isParallelTo(AcGeVector3d::kZAxis))
		{
			if (fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
				vtV = AcGeVector3d::kYAxis;//45度为 y
			else
				vtV = AcGeVector3d::kXAxis;//45度为 y
		}
		else
		{
			AcGeLine3d ln(ptGe[0], vtDir);
			if (ln.isParallelTo(AcGePlane::kXYPlane))
			{
				vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
			}
			else
			{
				vtV = vtDir.perpVector();
			}
		}
		vtV.normalize();

		if (bVlvISOV && vtDir.isPerpendicularTo(AcGeVector3d::kZAxis))
		{
			vtV = AcGeVector3d::kZAxis;
		}

		double dWD = 0.0;
		pXDataMap->GetAt(PIPE_INTERFACED, dWD);
		pXDataMap->GetAt(PIPE_LEVEL, sLevel);

		ptGe[0] += vtV * 0.5 * dWD;
		ptGe[2] = ptGe[0] - vtV * dWD;

		//螺纹2 法兰管3 只画竖线
		MakePoly(ptGe[0], ptGe[2], pFitting->layerId(), ( nConnectType == 3 ) ? dPlotPipeW * m_dScale : 0, kColorByLayer, pXDataMap);

		//承插1
		//绘制U口
		if (nConnectType == 1)
		{
			double dL = 0.0;
			pXDataMap->GetAt(PIPE_INTERFACEL, dL);

			ptGe[1] = ptGe[0] + vtDir * dL;
			MakePoly(ptGe[0], ptGe[1], pFitting->layerId(), 0.0, kColorByLayer, pXDataMap);

			ptGe[3] = ptGe[2] + vtDir * dL;
			MakePoly(ptGe[2], ptGe[3], pFitting->layerId(), 0.0, kColorByLayer, pXDataMap);
		}


		//统计螺栓 螺母 信息
		//BOLT - 0:专用级双头螺柱#35CrMoA#HG / T 20613 - 2009#螺栓, 专用级双头螺柱, 35CrMoA, HG / T 20613 - 2009, RF, 1.6#M20#105#8#M20#105#8  type : String
		//BOLT - 1:专用级双头螺柱#35CrMoA#HG / T 20613 - 2009#螺栓, 专用级双头螺柱, 35CrMoA, HG / T 20613 - 2009, RF, 1.6#M20#105#8#M20#105#8  type : String 
		//GSKT - 0 : 150.0#石棉橡胶板#1.600#1.5#透镜垫, 石棉橡胶板, HG / T 20609 - 2009, RF, 1.6, 1.5  type : String
		//GSKT - 1 : 125.0#石棉橡胶板#1.600#1.5#透镜垫, 石棉橡胶板, HG / T 20609 - 2009, RF, 1.6, 1.5  type : String

		if (nConnectType == 3 || nConnectType == 5)//无法兰结构 承插 或焊接 无垫片 无法兰
		{
			sKey.Format(_T("%s%d"), PIPE_GASKETINF, i);
			if (pXDataMap->GetAt(sKey, sGasketInf))
			{
				//公称直径#材质#压力]#垫片厚度#描述
				arVals.RemoveAll();
				CoreTools::SplitStrintToArray(sGasketInf, arVals, _T('#'));

				if (arVals.GetCount() >= 5)
				{
					sSpec = arVals.GetAt(4);
					sMat = arVals.GetAt(1);
					sRem = arVals.GetAt(4);

					//公称直径#材质#压力#垫片厚度
					sDimtext.Format(_T("垫片 %s %s %s %s"), arVals.GetAt(0), arVals.GetAt(1), arVals.GetAt(2), arVals.GetAt(3));
					nIndex = AddFitDimtName(sDimtext, sSpec, sMat, sRem, sLevel);

					AcGeVector3d _v(inf.vtDir.perpVector());
					DimIndex(nIndex, inf.ptPos, _v, pFitting->objectId());
				}
			}

			sKey.Format(_T("%s%d"), PIPE_BOLTINF, i);
			if (pXDataMap->GetAt(sKey, sBoltInfs))
			{
				//[类型],[材质],[标准号],[描述],螺栓规格,螺栓长度,数量
				arVals.RemoveAll();
				CoreTools::SplitStrintToArray(sBoltInfs, arVals, _T('#'));

				if (arVals.GetSize() >= 7)
				{
					//专用级双头螺柱 35CrMoA M20x105
					sDimtext.Format(_T("%s %s %sx%s"), arVals.GetAt(0), arVals.GetAt(1), arVals.GetAt(4), arVals.GetAt(5));

					sSpec = arVals.GetAt(3);
					sMat = arVals.GetAt(1);
					sRem = arVals.GetAt(3);
					nCountAdd = _ttoi(arVals.GetAt(6));

					nIndex = AddFitDimtName(sDimtext, sSpec, sMat, sRem, sLevel, nCountAdd);
					//不需要标注 

					//螺母 5CrMoA M20
					sDimtext.Format(_T("%s螺母 %s %s"), arVals.GetAt(0), arVals.GetAt(1), arVals.GetAt(4));
					nIndex = AddFitDimtName(sDimtext, sSpec, sMat, sRem, sLevel, nCountAdd);
				}
			}
		}
	}
}

int AecISODrawMake::AddFitDimtName(CString& sDimtext,CString& sSpec,CString& sFitMat,CString& sRem,CString& sLevel,int nCountAdd)
{
	sDimtext.TrimRight();

	int nIndexNo = -1;
	CString sTxt;
	for (int i = 0;i < m_arFitSumRecs.GetSize();i++)
	{
		FitSumRec& fsr = m_arFitSumRecs.GetAt(i);
		if (sDimtext.CompareNoCase(fsr.szDimtext) == 0)
		{
			fsr.nCount += nCountAdd;
			nIndexNo = i + 1;
			break;
		}
	}

	if (nIndexNo == -1)
	{
		FitSumRec fsrt;
		memset(&fsrt, 0, sizeof(FitSumRec));

		_tcscpy(fsrt.szDimtext, (LPCTSTR)sDimtext);
		_tcscpy(fsrt.szSpec, (LPCTSTR)sSpec);
		_tcscpy(fsrt.szMat, (LPCTSTR)sFitMat);
		_tcscpy(fsrt.szLevel, (LPCTSTR)sLevel);

		if (sRem.IsEmpty())
			sRem = _T("-");
		_tcscpy(fsrt.szRem, (LPCTSTR)sRem);

		fsrt.nCount = nCountAdd;
		nIndexNo = m_arFitSumRecs.Add(fsrt);
		nIndexNo += 1;
	}

	return nIndexNo;
}

void AecISODrawMake::DimIndex(int nIndex, AcGePoint3d& ptPos,AcGeVector3d& vtV,const AcDbObjectId& id)
{
	if (!m_nDimIndex) return;

	AcGeVector3d vtDir = vtV;
	AecDbObjXDataMap xDataMap;
	KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap);

	double dTxtH = m_dTxtH, dTxWS = 1.0;
	//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
	xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptPos);
		m_xform.GetTransformByThis(vtDir);
	}

	//引出标注
	AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);
				
	AecDbEwPipeDim* pDim = new AecDbEwPipeDim;
	pDim->AddAecDbWEntity(id);
	pDim->SetDimStyle(0);
	pDim->SetDimDir(0);
	pDim->SetDimTextUporDownFlag(1);
	pDim->setLayer(idDimLay);
	pDim->SetTextStyleId(m_idDimSty);
	pDim->SetTextLayerId(idDimLay);
	pDim->setLayer(idDimLay);
	pDim->SetPScale(PipelineTools::getPScale());
	pDim->SetTextHeight(dTxtH);
	pDim->SetTextWidthScale(m_dWFact);

	CString sNo;
	sNo.Format(_T("%d"),nIndex);
	pDim->AddDimText(sNo, NULL);

	AcGeVector3d vt[4];
	vt[0].set(1, 1, 0); vt[1].set(-1, 1, 0);
	vt[2].set(-1, -1, 0); vt[3].set(1, -1, 0);

	vtDir.z = 0;

	if (vtDir.x > 1.e-10 && vtDir.y > 1.e-10) //I
	{
		vtDir = vt[0];
	}
	else if (vtDir.x < 1.e-10 && vtDir.y > 1.e-10) //II
	{
		vtDir = vt[1];
	}
	else if (vtDir.x < 1.e-10 && vtDir.y < 1.e-10) //III
	{
		vtDir = vt[2];
	}
	else if (vtDir.x > 1.e-10 && vtDir.y < 1.e-10) //IV
	{
		vtDir = vt[3];
	}

	vtDir.normalize();
	AcGePoint3d ptGe1 = ptPos, ptGe2;
	ptGe2 = ptGe1 + vtDir * 5.0 * dTxtH * PipelineTools::getPScale();

	pDim->AppendPoint(ptGe1);
	pDim->AppendPoint(ptGe2);

	AddISOEnt(pDim);
}

void AecISODrawMake::DimIndex(CString& sIndex, AcGePoint3d &ptPos, AcGeVector3d &vtDir,const  AcDbObjectId &id)
{
	if (!m_nDimIndex) return;

	AecDbObjXDataMap xDataMap;
	KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap);

	double dTxtH = m_dTxtH, dTxWS = 1.0;
	//xDataMap.GetAt(DOC_DIMTXTH, dTxtH);
	xDataMap.GetAt(DOC_DIMTXTF, dTxWS);

	if (!m_bWasDone)
	{
		m_xform.GetTransformByThis(ptPos);
		//m_xform.GetTransformByThis(vtDir);
	}

	//引出标注
	AcDbObjectId idDimLay = KTSetting::InitLayer(PipelineTools::gLayer_Pipe_Dim);

	AecDbEwPipeDim *pDim = new AecDbEwPipeDim;
	pDim->AddAecDbWEntity(id);
	pDim->SetDimStyle(0);
	pDim->SetDimDir(0);
	pDim->SetDimTextUporDownFlag(1);
	pDim->setLayer(idDimLay);
	pDim->SetTextStyleId(m_idDimSty);
	pDim->SetTextLayerId(idDimLay);
	pDim->setLayer(idDimLay);
	pDim->SetPScale(PipelineTools::getPScale());
	pDim->SetTextHeight(dTxtH);
	pDim->SetTextWidthScale(m_dWFact);

	CString sNo = sIndex;
	pDim->AddDimText(sNo, NULL);

	AcGeVector3d vt[4];
	vt[0].set(1, 1, 0); vt[1].set(-1, 1, 0);
	vt[2].set(-1, -1, 0); vt[3].set(1, -1, 0);

	vtDir.z = 0;
	/*if (vtDir.x > 1.e-10 && vtDir.y > 1.e-10) //I
	{
		vtDir = vt[0];
	}
	else if (vtDir.x < 1.e-10 && vtDir.y > 1.e-10) //II
	{
		vtDir = vt[1];
	}
	else if (vtDir.x < 1.e-10 && vtDir.y < 1.e-10) //III
	{
		vtDir = vt[2];
	}
	else if (vtDir.x > 1.e-10 && vtDir.y < 1.e-10) //IV
	{
		vtDir = vt[3];
	}*/

	vtDir.normalize();
	AcGePoint3d ptGe1 = ptPos, ptGe2;
	ptGe2 = ptGe1 + vtDir * 5.0 * dTxtH * PipelineTools::getPScale();

	pDim->AppendPoint(ptGe1);
	pDim->AppendPoint(ptGe2);

	AddISOEnt(pDim);
}

void AecISODrawMake::MakeISOFitting(AcDbObjectIdArray& arFitingIds,double dPlotPipeW,double dPlotDotD,int nPipeDim,int nFitDim,BOOL bElbowLine,BOOL bWelDot, BOOL bVlvISOV)
{
	AcDbObjectId id;
	AcDbEntity* pEnt = NULL;
	AecDbEwFitting* pFitting = NULL;
	AecDbObjXDataMap* pXDataMap = NULL;

	AcGePoint3d ptGe[10];
	AcGeVector3d vtDir[6];
	AecInterface intf[4];
	double dL = 0.0,dThk = 0.0,dFD = 0.0,dWD = 0.0,dTemp = 0.0, dTDN = 0;
	double dSW = 0.0,dEW = 0.0,dST = 0.0,dET = 0.0,dBW1 = 0.0,dBW2 = 0.0;
	double dPlus(0.0),dThick = 0, dPress = 1.6,dDN = 0.0,dLen = 0;

	int nType = 0,nIndex = 0;

	//iSO 标注内容
	AcGeVector3d vtDirT,vtV, vtOff;
	AcGePoint3d  ptPos, ptMid;
	double dGask = 0;
	CString	sDimtext,sGaskets = _T(""), sStd = _T(""),sEndF = _T("RF"), sMater, sLevel, sSpec, sRem;

	for (int i = 0;i < arFitingIds.length();i++)
	{
		id = arFitingIds.at(i);

		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead))
		{
			pFitting = AecDbEwFitting::cast(pEnt);
			if (pFitting != NULL)
			{
				sDimtext = _T("");
				pXDataMap = pFitting->GetSpecialtyData(AcDb::kForRead);
				pXDataMap->GetAt(KEY_RUNTIME,nType);
				int nColor = kColorByLayer;

				pXDataMap->GetAt(_T("COLOR"),nColor);
				pXDataMap->GetAt(PIPE_LEVEL, sLevel);
				pXDataMap->GetAt(PIPE_STDNO, sStd);
				pXDataMap->GetAt(PIPE_MATERIALFT, sMater);
				//pXDataMap->GetAt(PIPE_PRESSURE, dPress);
				pXDataMap->GetAt(PID_PIPE_DPRESS, dPress);
				pXDataMap->GetAt(PIPE_MATERIALFT, sMater);
				pXDataMap->GetAt(PIPE_DESCR, sRem);

				EFittingType eKind = (EFittingType)nType;
				switch (eKind)
				{
				case eElbow:
				case eReduceElbow:
					{
						pXDataMap->GetAt(KEY_MID,ptGe[1]);
						
						pFitting->GetInterface(0,intf[0]);
						pFitting->GetInterface(1,intf[1]);

						dGask = pFitting->GetGasketThick();
						for(int kk = 0;kk < 2;kk++)
						{
							intf[kk].vtDir.normalize();
							intf[kk].ptPos -= intf[kk].vtDir * 0.5 * dGask;
						}

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[1].ptPos;

						vtDir[0] = intf[0].vtDir;
						vtDir[1] = intf[1].vtDir;

						if (nFitDim > 0)
						{
							for (int k = 0; k < pFitting->GetInterfaceCount(); k++)
							{
								dLen = intf[k].ptPos.distanceTo(ptGe[1]);
								MakeDim(intf[k].ptPos, ptGe[1], dLen);
							}
						}

						MakeElbowISO(ptGe[0],vtDir[0],ptGe[1],ptGe[2],vtDir[1],dPlotPipeW,dPlotDotD, nFitDim,pFitting->layerId(),bElbowLine,bWelDot,nColor,pXDataMap);
						
						//Dxt rat
						pXDataMap->GetAt(PIPE_DN, dDN);
						pXDataMap->GetAt(PIPE_TDN, dTDN);
						pXDataMap->GetAt(PIPE_THICK,dThk);
						pXDataMap->GetAt(PIPE_ELBOWANG, dTemp);
						dTemp *= 180 / PI;
						
						if (eReduceElbow)
						{
							sDimtext.Format(_T("变径弯头 DN%d-DN%d %d度 %s %s %s"), (int)(dDN + 0.5), (int)(dTDN + 0.5), (int)(dTemp + 0.5), sLevel, sStd, sMater);
							sSpec.Format(_T("DN%d PN%.1f"), (int)(dDN + 0.5), dPress);
						}
						else
						{
							sDimtext.Format(_T("弯头 DN%d %d度 %s %s %s"), (int)(dDN + 0.5),(int)(dTemp + 0.5), sLevel, sStd, sMater);
							sSpec.Format(_T("DN%d PN%.1f"), (int)(dDN + 0.5), dPress);
						}

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[1].ptPos;
						pXDataMap->GetAt(KEY_MID, ptGe[1]);

						if (!m_bWasDone)
						{
							m_xform.GetTransformByThis(ptGe[0]); 
							m_xform.GetTransformByThis(ptGe[1]);
							m_xform.GetTransformByThis(ptGe[2]);

							vtDir[0] = ptGe[0] - ptGe[1];
							vtDir[1] = ptGe[2] - ptGe[1];
						}

						vtDir[0].normalize();
						vtDir[1].normalize();

						vtDirT = vtDir[0] + vtDir[1];
						vtDirT.normalize();
						vtDirT.negate();

						pXDataMap->GetAt(KEY_MID,ptPos);

						nIndex = AddFitDimtName(sDimtext,sSpec, sMater,sRem, sLevel);
						DimIndex(nIndex, ptPos, vtDirT,id);

						MakeISOFittingFlange(pFitting, dPlotPipeW, dPlotDotD, nPipeDim, nFitDim, bElbowLine, bWelDot,bVlvISOV);

						break;
					}
				case eReduce:
					{
						pFitting->GetInterface(0,intf[0]);
						pFitting->GetInterface(1,intf[1]);

						for (int kk = 0; kk < 2; kk++)
						{
							intf[kk].vtDir.normalize();
							intf[kk].ptPos -= intf[kk].vtDir * 0.5 * dGask;
						}

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[1].ptPos;
						vtDir[0] = intf[0].vtDir;
						vtDir[1] = intf[1].vtDir;

						AcGeLine3d ln3d(intf[0].ptPos, intf[0].vtDir);
						if (ln3d.isParallelTo(AcGePlane::kXYPlane))
						{
							vtV = intf[1].ptPos - intf[0].ptPos;
							vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
						}
						else
						{
							vtV = intf[0].vtDir.perpVector();
						}
						vtV.normalize();

						if (bVlvISOV && vtDir->isPerpendicularTo(AcGeVector3d::kZAxis))
						{
							vtV = AcGeVector3d::kZAxis;
						}

						MakeReducer(ptGe[0],ptGe[2],dPlotPipeW,dPlotDotD, nFitDim,pFitting->layerId(),bWelDot,nColor,pXDataMap);

						//外边线
						ptGe[3] = ptGe[0] + vtV * 0.5 * intf[0].dSize1;
						ptGe[4] = ptGe[0] - vtV * 0.5 * intf[0].dSize1;

						MakeReducer(ptGe[3], ptGe[4], dPlotPipeW, dPlotDotD, 0, pFitting->layerId(), bWelDot, nColor, pXDataMap);

						ptGe[5] = ptGe[2] + vtV * 0.5 * intf[1].dSize2;
						ptGe[6] = ptGe[2] - vtV * 0.5 * intf[1].dSize2;
						MakeReducer(ptGe[5], ptGe[6], dPlotPipeW, dPlotDotD, 0, pFitting->layerId(), bWelDot, nColor, pXDataMap);

						MakeReducer(ptGe[3], ptGe[5], dPlotPipeW, dPlotDotD, 0, pFitting->layerId(), bWelDot, nColor, pXDataMap);
						MakeReducer(ptGe[4], ptGe[6], dPlotPipeW, dPlotDotD, 0, pFitting->layerId(), bWelDot, nColor, pXDataMap);

						pXDataMap->GetAt(PIPE_DN, dDN);
						pXDataMap->GetAt(PIPE_TDN, dTDN);
						
						vtOff.set(0, 0, 0);
						pXDataMap->GetAt(KEY_OFFSET, vtOff);
						
						//500×400-Sch80 GB/T 13401
						if (vtOff.isZeroLength())
							sDimtext.Format(_T("变径 DN%d-%d %s %s %s"), (int)(dDN + 0.5), (int)(dTDN + 0.5), sLevel,sStd,sMater);
						else
							sDimtext.Format(_T("偏心变径 DN%d-%d %s %s %s"), (int)(dDN + 0.5), (int)(dTDN + 0.5), sLevel, sStd, sMater);

						sSpec.Format(_T("DN%d-%d PN%.1f"), (int)(dDN + 0.5), (int)(dTDN + 0.5), dPress);

						Midpoint(ptGe[2],ptGe[0],ptPos);

						vtDirT = ptGe[2] - ptGe[0];
						vtV = vtDirT;
						vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
						vtV.normalize();
						ptPos += vtV * dPlotPipeW;
						
						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptPos, vtV, id);

						MakeISOFittingFlange(pFitting, dPlotPipeW, dPlotDotD, nPipeDim, nFitDim, bElbowLine, bWelDot, bVlvISOV);

						break;
					}
				case eTee:
				case eLateral:
				case eWye:
					{
						pXDataMap->GetAt(KEY_MID,ptGe[1]);

						pFitting->GetInterface(0,intf[0]);
						pFitting->GetInterface(1,intf[1]);
						pFitting->GetInterface(2,intf[2]);

						for (int kk = 0; kk < 3; kk++)
						{
							intf[kk].vtDir.normalize();
							intf[kk].ptPos -= intf[kk].vtDir * 0.5 * dGask;
						}

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[1].ptPos;
						ptGe[3] = intf[2].ptPos;

						MakeTeeISO(ptGe[0],ptGe[2],ptGe[3],ptGe[1],dPlotPipeW,dPlotDotD, nFitDim,pFitting->layerId(),bWelDot,nColor,pXDataMap);

						if (nFitDim > 0)
						{
							for (int k = 0;k < pFitting->GetInterfaceCount();k++)
							{
								dLen = intf[k].ptPos.distanceTo(ptGe[1]);
								MakeDim(intf[k].ptPos, ptGe[1], dLen);
							}
						}

						pXDataMap->GetAt(PIPE_DN,dDN);
						pXDataMap->GetAt(PIPE_TDN, dTDN);

						if (eKind == eTee)
							sDimtext.Format(_T("三通 DN%dx%d %s %s %s"),(int)(dDN + 0.5), (int)(dTDN + 0.5), sLevel, sStd, sMater);
						else if(eKind == eLateral)
							sDimtext.Format(_T("L三通 DN%dx%d %s %s %s"), (int)(dDN + 0.5),(int)(dTDN + 0.5), sLevel, sStd, sMater);
						else if(eKind == eWye)
							sDimtext.Format(_T("Y三通 DN%dx%d %s %s %s"), (int)(dDN + 0.5), (int)(dTDN + 0.5), sLevel, sStd, sMater);
						
						sSpec.Format(_T("DN%dx%d PN%.1f"), (int)(dDN + 0.5), (int)(dTDN + 0.5),dPress);

						vtDirT = ptGe[2] - ptGe[0];

						vtV = vtDirT;
						vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
						vtV.normalize();

						ptPos = ptGe[1] + vtV * dPlotPipeW;

						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptPos, vtV, id);

						MakeISOFittingFlange(pFitting, dPlotPipeW, dPlotDotD, nPipeDim, nFitDim, bElbowLine, bWelDot,bVlvISOV);

						break;
					}
				case eCross:
					{
						pXDataMap->GetAt(KEY_MID,ptGe[1]);

						pFitting->GetInterface(0,intf[0]);
						pFitting->GetInterface(1,intf[1]);
						pFitting->GetInterface(2,intf[2]);
						pFitting->GetInterface(3,intf[3]);

						for (int kk = 0; kk < 4; kk++)
						{
							intf[kk].vtDir.normalize();
							intf[kk].ptPos -= intf[kk].vtDir * 0.5 * dGask;
						}

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[1].ptPos;
						ptGe[3] = intf[2].ptPos;
						ptGe[4] = intf[3].ptPos;

						MakeCrossISO(ptGe,dPlotPipeW,dPlotDotD, nFitDim,pFitting->layerId(),bWelDot,nColor,pXDataMap);

						if (nFitDim > 0)
						{
							for (int k = 0; k < pFitting->GetInterfaceCount(); k++)
							{
								dLen = intf[k].ptPos.distanceTo(ptGe[1]);
								MakeDim(intf[k].ptPos, ptGe[1], dLen);
							}
						}

						pXDataMap->GetAt(PIPE_DN, dDN);
						pXDataMap->GetAt(PIPE_TDN, dTDN);
						
						sDimtext.Format(_T("四通 DN%dx%d %s %s %s"), (int)(dDN + 0.5), (int)(dTDN + 0.5), sLevel, sStd, sMater);
						sSpec.Format(_T("DN%dx%d PN%.1f"), (int)(dDN + 0.5), (int)(dTDN + 0.5), dPress);

						if (!m_bWasDone)
						{
							m_xform.GetTransformByThis(ptGe[0]);
							m_xform.GetTransformByThis(ptGe[3]);
						}

						vtDirT = ptGe[3] - ptGe[0];
						vtV = vtDirT;
						vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
						vtV.normalize();

						pXDataMap->GetAt(KEY_MID, ptGe[1]);
						ptPos = ptGe[1] + vtV * dPlotPipeW;

						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptPos, vtV, id);

						MakeISOFittingFlange(pFitting, dPlotPipeW, dPlotDotD, nPipeDim, nFitDim, bElbowLine, bWelDot, bVlvISOV);

						break;
					}
				case eWcap:
					{
						pXDataMap->GetAt(KEY_START,ptGe[0]);
						pXDataMap->GetAt(KEY_MAJBR,vtDir[0]);
						pXDataMap->GetAt(KEY_L,dL);

						vtDir[0].normalize();
						ptGe[1] = ptGe[0] + vtDir[0] * dL;
						MakePoly(ptGe[0],ptGe[1],pFitting->layerId(),dPlotPipeW * m_dScale,nColor,pXDataMap);
						if (bWelDot)
						{
							MakeWDot(ptGe[0],pFitting->layerId(),dPlotDotD * m_dScale);
						}

						if (nFitDim)
						MakeDim(ptGe[0],ptGe[1],ptGe[0].distanceTo(ptGe[1]));

						pXDataMap->GetAt(PIPE_DN, dDN);

						sDimtext.Format(_T("堵头 DN%d sLevel, sStd, sMater"),(int)(dDN + 0.5), sLevel, sStd, sMater);
						sSpec.Format(_T("DN%dx%d PN%.1f"), (int)(dDN + 0.5), (int)(dTDN + 0.5), dPress);

						if (!m_bWasDone)
						{
							m_xform.GetTransformByThis(ptGe[0]);
							m_xform.GetTransformByThis(ptGe[1]);
						}

						vtDirT = ptGe[1] - ptGe[0];
						vtV = vtDirT;
						vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
						vtV.normalize();
						ptPos = ptGe[0] + vtV * dPlotPipeW;

						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptPos, vtV, id);

						break;
					}
				case eFlange:
					{
						pXDataMap->GetAt(KEY_START,ptGe[0]);//
						pXDataMap->GetAt(PIPE_THICK,dThk);	//总厚
						pXDataMap->GetAt(PIPE_WD,dWD);		//发兰盘外径
						pXDataMap->GetAt(KEY_MAJBR,vtDir[0]);//

						pFitting->GetInterface(0, intf[0]);
						pFitting->GetInterface(1, intf[1]);

						vtV = vtDir[0];
						if (vtDir[0].isParallelTo(AcGeVector3d::kZAxis))
						{
							if (fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
								vtV = AcGeVector3d::kYAxis;//45度为 y
							else
								vtV = AcGeVector3d::kXAxis;//45度为 y
						}
						else
						{
							AcGeLine3d ln(ptGe[0],vtDir[0]);
							if (ln.isParallelTo(AcGePlane::kXYPlane))
							{
								vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
							}
							else
							{
								vtV = vtDir[0].perpVector();
							}
						}
						vtV.normalize();
						if (bVlvISOV && vtDir[0].isPerpendicularTo(AcGeVector3d::kZAxis))
						{
							vtV = AcGeVector3d::kZAxis;
						}

						//取中点绘制法兰
						ptGe[0] = MidPoint(intf[0].ptPos, intf[1].ptPos);
						ptGe[0] += vtV * 0.5 * dWD;
						ptGe[1] = ptGe[0] - vtV * dWD;

						MakePoly(ptGe[0], ptGe[1], pFitting->layerId(), dPlotPipeW *m_dScale, nColor, pXDataMap);

						if (bWelDot)
						{
							MakeWDot(MidPoint(intf[0].ptPos, intf[1].ptPos),pFitting->layerId(),dPlotDotD * m_dScale);
						}

						//三者其一
						pXDataMap->GetAt(PIPE_FLANGF,sEndF);
						pXDataMap->GetAt(PIPE_FLANGF1,sEndF);
						pXDataMap->GetAt(PIPE_FLANGF2,sEndF);

						//法兰 DN100-PN1.6 RF GB/T9116.1-2000
						sDimtext.Format(_T("法兰 DN%d-PN%.1f %s %s"), (int)(dDN + 0.5), dPress, sEndF, sStd);
						sSpec.Format(_T("DN%d-PN%.1f"), (int)(dDN + 0.5), dPress);

						vtDirT = intf[0].vtDir;
						ptPos = MidPoint(intf[0].ptPos, intf[1].ptPos);
						
						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptPos, vtDirT, id);

						break;
					}
				case eFlxJoin:
					{
						pXDataMap->GetAt(KEY_MAJBR, vtDir[0]);
						pXDataMap->GetAt(KEY_MID, ptGe[0]);

						pXDataMap->GetAt(KEY_A, dWD);
						
						pXDataMap->GetAt(KEY_TYPE, sRem);
						pXDataMap->GetAt(PIPE_STDNO, sStd);
						
						vtV = vtDir[0];
						if (vtDir[0].isParallelTo(AcGeVector3d::kZAxis))
						{
							if (fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
								vtV = AcGeVector3d::kYAxis;//45度为 y
							else
								vtV = AcGeVector3d::kXAxis;//45度为 y
						}
						else
						{
							AcGeLine3d ln(ptGe[0], vtDir[0]);
							if (ln.isParallelTo(AcGePlane::kXYPlane))
							{
								vtV.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);
							}
							else
							{
								vtV = vtDir[0].perpVector();
							}
						}
						vtV.normalize();

						//取中点绘制 
						ptGe[0] += vtV * 0.5 * dWD;
						ptGe[1] = ptGe[0] - vtV * dWD;

						MakePoly(ptGe[0], ptGe[1], pFitting->layerId(), dPlotPipeW *m_dScale, nColor, pXDataMap);

						if (bWelDot)
						{
							MakeWDot(MidPoint(intf[0].ptPos, intf[1].ptPos), pFitting->layerId(), dPlotDotD * m_dScale);
						}

						//卡箍 DN100-PN1.6 RF GB/T9116.1-2000
						sDimtext.Format(_T("卡箍 DN%d-PN%.1f %s %s"), (int)(dDN + 0.5), dPress, sRem, sStd);
						sSpec.Format(_T("DN%d-PN%.1f"), (int)(dDN + 0.5), dPress);

						vtDirT = vtDir[0];
						ptPos = MidPoint(ptGe[0], ptGe[1]);

						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptPos, vtDirT, id);

						break;
					}
				default:
					break;
				}
			}

			AecDbHvacFitting* pHFit = AecDbHvacFitting::cast(pEnt);
			if (pHFit != NULL)
			{
				AecHvac::DuctParam data;
				memset(&data,0,sizeof(AecHvac::DuctParam));
				pHFit->GetDuctParam(data);

				pXDataMap = pHFit->GetSpecialtyData(AcDb::kForRead);

				sLevel = _T(""); sStd = _T("");
				sMater = _T("");
				dPress = 0.0; sMater = _T("");
				sRem = _T("");

				sMater = data.szMat;
				sRem = data.szRem;

				pXDataMap->GetAt(PIPE_LEVEL, sLevel);
				pXDataMap->GetAt(PIPE_STDNO, sStd);
				pXDataMap->GetAt(PID_PIPE_DPRESS, dPress);
				
				pXDataMap->GetAt(KEY_RUNTIME,nType);

				int nColor = kColorByLayer;
				pXDataMap->GetAt(_T("COLOR"),nColor);

				switch(nType)
				{
				case eElbow:
					{
						pXDataMap->GetAt(HELB_CornerPoint,ptGe[1]);
						pHFit->GetInterface(0,intf[0]);
						pHFit->GetInterface(1,intf[1]);

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[1].ptPos;
						vtDir[0] = intf[0].vtDir;
						vtDir[1] = intf[1].vtDir;

						MakeHElbowISO(ptGe[0],vtDir[0],ptGe[1],ptGe[2],vtDir[1],dPlotPipeW,dPlotDotD, nFitDim,pHFit->layerId(),bElbowLine,bWelDot,nColor,pXDataMap);

						if (nPipeDim > 0)
						{
							for (int k = 0; k < pHFit->GetInterfaceCount(); k++)
							{
								dLen = intf[k].ptPos.distanceTo(ptGe[1]);
								MakeDim(intf[k].ptPos, ptGe[1], dLen);
							}
						}

						if (!m_bWasDone)
						{
							m_xform.GetTransformByThis(ptGe[0]);
							m_xform.GetTransformByThis(ptGe[2]);
						}

						if (data.eType == eCircle)
						{
							//Dxt rat
							sDimtext.Format(_T("D%dx%.1f %.1f"),(int)(data.dSize[0]+0.5),data.dSize[2],data.m_dRatio);
							vtDirT = ptGe[2] - ptGe[0];
							pXDataMap->GetAt(HELB_CornerPoint,ptPos);

							if (!m_bWasDone)
							m_xform.GetTransformByThis(ptPos);
						}
						else
						{
							sDimtext.Format(_T("%dx%d t=%.1f %.1f"),(int)(data.dSize[0]+0.5),(int)(data.dSize[1] + 0.5),data.dSize[2],data.m_dRatio);
							vtDirT = ptGe[2] - ptGe[0];
							pXDataMap->GetAt(HELB_CornerPoint,ptPos);

							if (!m_bWasDone)
							m_xform.GetTransformByThis(ptPos);
						}

						vtDirT = vtDir[0] + vtDir[1];
						vtDirT.normalize();
						vtDirT.negate();

						pXDataMap->GetAt(HELB_CornerPoint, ptPos);

						sSpec = sDimtext;
						sDimtext.Insert(0, _T("风管弯头"));
						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptPos, vtDirT, id);

						break;
					}
				case eReduce:
					{
						pHFit->GetInterface(0,intf[0]);
						pHFit->GetInterface(1,intf[1]);

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[2].ptPos;
						vtDir[0] = intf[0].vtDir;
						vtDir[1] = intf[1].vtDir;

						MakeHReducer(ptGe[0],ptGe[2],dPlotPipeW,dPlotDotD, nFitDim,pHFit->layerId(),bWelDot,nColor,pXDataMap);

						if (!m_bWasDone)
						{
							m_xform.GetTransformByThis(ptGe[0]);
							m_xform.GetTransformByThis(ptGe[2]);
						}

						vtDirT = ptGe[2] - ptGe[0];
						Midpoint(ptGe[2],ptGe[0],ptPos);
						vtV = vtDirT;
						vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
						vtV.normalize();
						ptPos += vtV * dPlotPipeW;

						if (data.eType == eCircle)
						{
							//Dxt rat
							pXDataMap->GetAt(HRED_StartWidth,dSW);
							pXDataMap->GetAt(HRED_EndWidth,dEW);

							sDimtext.Format(_T("D%d-D%d"),(int)(dSW+0.5),(int)(dEW+0.5));

							vtDirT = ptGe[2] - ptGe[0];
							pXDataMap->GetAt(HELB_CornerPoint,ptPos);

							if (!m_bWasDone)
							m_xform.GetTransformByThis(ptPos);
						}
						else
						{
							pXDataMap->GetAt(HRED_StartWidth,dSW);
							pXDataMap->GetAt(HRED_EndWidth,dEW);

							pXDataMap->GetAt(HRED_StartThick,dST);
							pXDataMap->GetAt(HRED_EndThick,dET);

							sDimtext.Format(_T("%dx%.1f-%dx%.1f"),(int)(dSW+0.5),(int)(dST+0.5),(int)(dEW+0.5),(int)(dET+0.5));

							vtDirT = ptGe[2] - ptGe[0];
							pXDataMap->GetAt(HELB_CornerPoint,ptPos);

							if (!m_bWasDone)
							m_xform.GetTransformByThis(ptPos);
						}

						vtDirT = vtDir[0] + vtDir[1];
						vtDirT.normalize();
						vtDirT.negate();

						sSpec = sDimtext;
						sDimtext.Insert(0, _T("风管变径"));
						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, intf[0].ptPos, vtDirT, id);

						break;
					}
					break;
				case eTee:
					{
						pHFit->GetInterface(0,intf[0]);
						pHFit->GetInterface(1,intf[1]);
						pHFit->GetInterface(2,intf[2]);

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[1].ptPos;
						ptGe[3] = intf[2].ptPos;
						ptGe[1] = MidPoint(ptGe[0],ptGe[2]);

						vtDir[0] = intf[0].vtDir;
						vtDir[1] = intf[2].vtDir;

						MakeHTeeISO(ptGe[0],ptGe[2],ptGe[3],ptGe[1],dPlotPipeW,dPlotDotD, nFitDim,pHFit->layerId(),bWelDot,nColor,pXDataMap);

						if (nPipeDim > 0)
						{
							for (int k = 0; k < pHFit->GetInterfaceCount(); k++)
							{
								dLen = intf[k].ptPos.distanceTo(ptGe[1]);
								MakeDim(intf[k].ptPos, ptGe[1], dLen);
							}
						}

						pXDataMap->GetAt(HCRS_StartWidth, dSW);			
						pXDataMap->GetAt(HCRS_Thick, dThick);		
						pXDataMap->GetAt(HCRS_EndWidth, dEW);		
						pXDataMap->GetAt(HCRS_Branch1Width, dBW1);		
						pXDataMap->GetAt(HCRS_Branch2Width, dBW2);

						if (data.eType == eCircle)
						{
							sDimtext.Format(_T("%dx%.1f-%dx%.1f"),(int)(dSW+0.5),(int)(dThick+0.5),(int)(dBW1+0.5),(int)(dBW2+0.5));
						}
						else
						{
							sDimtext.Format(_T("D%d-D%dx"),(int)(dSW+0.5),(int)(dEW+0.5));
						}

						vtDirT = ptGe[2] - ptGe[0];
						pXDataMap->GetAt(HCRS_StartPoint,ptPos);

						if (!m_bWasDone)
						m_xform.GetTransformByThis(ptPos);

						vtDirT = vtDir[0] + vtDir[1];
						vtDirT.normalize();
						vtDirT.negate();

						sSpec = sDimtext;
						sDimtext.Insert(0, _T("风管三通"));
						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptGe[1], vtDirT, id);

						break;
					}
				case eCross:
					{
						pHFit->GetInterface(0,intf[0]);
						pHFit->GetInterface(1,intf[1]);
						pHFit->GetInterface(2,intf[2]);
						pHFit->GetInterface(3,intf[3]);

						ptGe[0] = intf[0].ptPos;
						ptGe[2] = intf[1].ptPos;

						ptGe[3] = intf[2].ptPos;
						ptGe[4] = intf[3].ptPos;

						vtDir[0] = intf[0].vtDir;
						vtDir[1] = intf[2].vtDir;

						ptGe[1] = MidPoint(ptGe[0],ptGe[2]);

						MakeHCrossISO(ptGe,dPlotPipeW,dPlotDotD, nFitDim,pHFit->layerId(),bWelDot,nColor,pXDataMap);

						if (nPipeDim > 0)
						{
							for (int k = 0; k < pHFit->GetInterfaceCount(); k++)
							{
								dLen = intf[k].ptPos.distanceTo(ptGe[1]);
								MakeDim(intf[k].ptPos, ptGe[1], dLen);
							}
						}

						pXDataMap->GetAt(HCRS_StartWidth, dSW);			
						pXDataMap->GetAt(HCRS_Thick, dThick);		
						pXDataMap->GetAt(HCRS_EndWidth, dEW);		
						pXDataMap->GetAt(HCRS_Branch1Width, dBW1);		
						pXDataMap->GetAt(HCRS_Branch2Width, dBW2);

						if (data.eType == eCircle)
						{
							sDimtext.Format(_T("%dx%.1f-%dx%.1f"),(int)(dSW+0.5),(int)(dThick+0.5),(int)(dBW1+0.5),(int)(dBW2+0.5));
						}
						else
						{
							sDimtext.Format(_T("D%d-D%dx"),(int)(dSW+0.5),(int)(dEW+0.5));
						}

						vtDirT = ptGe[2] - ptGe[0];
						pXDataMap->GetAt(HCRS_StartPoint,ptPos);

						if (!m_bWasDone)
						m_xform.GetTransformByThis(ptPos);


						vtDirT = vtDir[0] + vtDir[1];
						vtDirT.normalize();
						vtDirT.negate();

						sSpec = sDimtext;
						sDimtext.Insert(0, _T("风管四通"));
						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, ptGe[1], vtDirT, id);

						break;
					}
				case eOffset:
					{
						pHFit->GetInterface(0,intf[0]);
						pHFit->GetInterface(1,intf[1]);

						ptGe[0] = intf[0].ptPos;
						ptGe[3] = intf[1].ptPos;

						vtDir[0] = intf[0].vtDir;
						vtDir[1] = intf[1].vtDir;

						pXDataMap->GetAt(HVAC_PlusEdge, dPlus);
						ptGe[1] = ptGe[0] - dPlus * intf[0].vtDir;
						ptGe[2] = ptGe[3] - dPlus * intf[1].vtDir;

						MakePoly(ptGe[0],ptGe[1],pHFit->layerId(),dPlotPipeW * m_dScale,nColor,pXDataMap);
						MakePoly(ptGe[1],ptGe[2],pHFit->layerId(),dPlotPipeW * m_dScale,nColor,pXDataMap);
						MakePoly(ptGe[2],ptGe[3],pHFit->layerId(),dPlotPipeW * m_dScale,nColor,pXDataMap);

						pXDataMap->GetAt(HCRS_StartWidth, dSW);			
						pXDataMap->GetAt(HCRS_Thick, dThick);		
						pXDataMap->GetAt(HCRS_EndWidth, dEW);		

						if (data.eType == eCircle)
						{
							sDimtext.Format(_T("%dx%.1f-%dx%.1f"),(int)(dSW+0.5),(int)(dThick+0.5),(int)(dEW+0.5),(int)(dThick+0.5));
						}
						else
						{
							sDimtext.Format(_T("D%d-D%dx"),(int)(dSW+0.5),(int)(dEW+0.5));
						}

						vtDirT = ptGe[2] - ptGe[0];
						pXDataMap->GetAt(HCRS_StartPoint,ptPos);

						if (!m_bWasDone)
						m_xform.GetTransformByThis(ptPos);

						vtDirT = vtDir[0] + vtDir[1];
						vtDirT.normalize();
						vtDirT.negate();

						sSpec = sDimtext;
						sDimtext.Insert(0, _T("风管乙字弯"));
						nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
						DimIndex(nIndex, intf[0].ptPos, vtDirT, id);

						break;
					}
				default:
					break;
				}
			}

			AecDbEcFitting *pEFit = AecDbEcFitting::cast(pEnt);
			if (pEFit != NULL)
			{
				AcArray<AecInterface> arInfs;
				pEFit->GetInterface(arInfs);

				AecHvac::DuctParam dp;
				memset(&dp,0, sizeof(AecHvac::DuctParam));
				pEFit->GetDuctParam(dp);

				sDimtext = _T("");
				pXDataMap = pEFit->GetSpecialtyData(AcDb::kForRead);

				pXDataMap->GetAt(KEY_MID, ptMid);

				ptPos = ptMid;

				if (!m_bWasDone)
				m_xform.GetTransformByThis(ptPos);

				int nColor = kColorByLayer;
				pXDataMap->GetAt(_T("COLOR"), nColor);

				sLevel = _T(""); sStd = _T("");
				sMater = _T(""); 
				dPress = 0.0; sMater = _T("");
				sRem = _T("");

				pXDataMap->GetAt(PIPE_LEVEL, sLevel);
				pXDataMap->GetAt(PIPE_STDNO, sStd);
				sMater = dp.szMat;
				pXDataMap->GetAt(PID_PIPE_DPRESS, dPress);
				sRem = dp.szRem;
				pXDataMap->GetAt(KEY_RUNTIME, nType);

				for (int ii = 0;ii < arInfs.length();ii++)
				{
					AecInterface &inf = arInfs.at(ii);

					MakePoly(inf.ptPos, ptMid, pEFit->layerId(), dPlotPipeW *m_dScale, nColor, pXDataMap);
				}

				if (nPipeDim > 0)
				{
					for (int k = 0; k < pEFit->GetInterfaceCount(); k++)
					{
						dLen = arInfs.at(k).ptPos.distanceTo(ptMid);
						MakeDim(arInfs.at(k).ptPos, ptMid, dLen);
					}
				}

				ptGe[0] = arInfs.first().ptPos;
				ptGe[2] = arInfs.last().ptPos;

				if (!m_bWasDone)
				{
					m_xform.GetTransformByThis(ptGe[0]);
					m_xform.GetTransformByThis(ptGe[2]);
				}

				vtDirT = ptGe[2] - ptGe[0];

				int nTeeStyle = 0;
				switch (nType)
				{
					case eElbow:
					{
						sDimtext = _T("桥架弯通");
						break;
					}
					case eTee:
					{
						pXDataMap->GetAt(KEY_TEESTYLE, nTeeStyle);

						if (nTeeStyle == 0)
							sDimtext = _T("桥架三通");
						else if (nTeeStyle > 0 && nTeeStyle < 4)
							sDimtext = _T("桥架垂直三通");
						else if(nTeeStyle >= 4 && nTeeStyle <= 5)
							sDimtext = _T("桥架垂直三通");
						break;
					}
					case eCross:
					{
						sDimtext = _T("桥架四通");
						break;
					}
					case eReduce:
					{
						sDimtext = _T("桥架异径接头");
						break;
					}
					case eOffset:
					{
						sDimtext = _T("桥架乙字弯通");
						break;
					}
					default:
						break;
				}


				sRem.Format(_T("%s %dx%d %s %s %s"), dp.szType, (int)(dp.dSize[0] + 0.5), (int)(dp.dSize[1] + 0.5), dp.szSys, dp.szNo, dp.szMat);
				sSpec.Format(_T("%dx%d"), (int)(dp.dSize[0] + 0.5), (int)(dp.dSize[1] + 0.5));

				//标注索引
				nIndex = AddFitDimtName(sDimtext, sSpec, sMater, sRem, sLevel);
				DimIndex(nIndex, ptMid, vtDirT, id);
			}
			pEnt->close();
		}
	}
}

void AecISODrawMake::MakeElbowISO(AcGePoint3d& ptSta,AcGeVector3d& vtSta,AcGePoint3d& ptMid,
								  AcGePoint3d& ptEnd,AcGeVector3d& vtEnd,double dPlotPipeW,
								  double dPlotDotD,int nPipeDim,const AcDbObjectId& idLay,
								  BOOL bElbowLine,BOOL bWelDot,int nCr,AecDbObjXDataMap* pXDataMap)
{
	if (bElbowLine)
	{
		MakePoly(ptSta,ptMid,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
		MakePoly(ptMid,ptEnd,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	}
	else
	{
		AcGeVector3d vtNorm = vtEnd.crossProduct(vtSta);
		AcGeVector3d vtStaV = vtSta;
		vtStaV.rotateBy(PI / 2.0,vtNorm);

		AcGeVector3d vtEndV = vtEnd;
		vtEndV.rotateBy(PI / 2.0,vtNorm);

		AcGeLine3d ln1(ptSta,vtStaV);
		AcGeLine3d ln2(ptEnd,vtEndV);

		AcGePoint3d ptCen;
		if ( ln1.intersectWith(ln2,ptCen) )
		{
			AcDbCircle cir;
			cir.setCenter(ptCen);
			cir.setRadius(ptSta.distanceTo(ptCen));
			cir.setNormal(vtNorm);

			AcGePoint3dArray pts;
			pts.append(ptSta);
			pts.append(ptEnd);

			AcDbVoidPtrArray arCrvptrs;
			cir.getSplitCurves(pts,arCrvptrs);

			AcDbLine ln;
			ln.setStartPoint(ptMid);
			ln.setEndPoint(ptCen);
			ln.setNormal(vtNorm);

			AcDbCurve* pArc = NULL;
			AcDbCurve* pCrv = NULL;

			for (int i = 0;i < arCrvptrs.length();i++)
			{
				pCrv = (AcDbCurve*)arCrvptrs.at(i);

				pts.setLogicalLength(0);
				ln.intersectWith(pCrv,AcDb::kOnBothOperands,pts);

				if (pts.length() > 0)
				{
					pArc = pCrv;
					break;
				}
				else
				{
					delete pCrv;
				}
			}

			if (pArc != NULL)
			{
				double dSta = 0.0,dEnd = 0.0;
				pArc->getStartParam(dSta);
				pArc->getEndParam(dEnd);

				double dStep = (dEnd - dSta) / 5;
				AcGePoint3d ptGe;

				AcDbPolyline* pPoly = new AcDbPolyline;
				for (int i = 0;i <= 5;i++)
				{
					pArc->getPointAtParam(dSta + i * dStep,ptGe);

					if (!m_bWasDone)
					m_xform.GetTransformByThis(ptGe);
					pPoly->addVertexAt(i,ptGe.convert2d(AcGePlane::kXYPlane));
				}
				pPoly->setConstantWidth(dPlotPipeW * m_dScale);
				pPoly->setLayer(idLay);
				pPoly->setColorIndex(nCr);
				pPoly->setNormal(AcGeVector3d::kZAxis);
		
				if (pXDataMap != NULL)
				{
					pXDataMap->Write(pPoly,BIMDATA_APP);
				}
				AddISOEnt(pPoly);

				if (nPipeDim) //标注
				{
					AcGePoint3d ptSta1 = ptSta;
					AcGePoint3d ptEnd1 = ptEnd;
					AcGePoint3d ptMid1 = ptMid;

					MakeDim(ptSta1,ptMid1,ptSta1.distanceTo(ptMid));
					MakeDim(ptMid1,ptEnd1,ptEnd1.distanceTo(ptMid));
				}
			}
		}
	}
	//焊接点
	if (bWelDot)
	{
		MakeWDot(ptSta,idLay,dPlotDotD * m_dScale);
		MakeWDot(ptEnd,idLay,dPlotDotD * m_dScale);
	}
}

void AecISODrawMake::MakeHElbowISO(AcGePoint3d& ptSta,AcGeVector3d& vtSta,AcGePoint3d& ptMid,
								  AcGePoint3d& ptEnd,AcGeVector3d& vtEnd,double dPlotPipeW,
								  double dPlotDotD,int nPipeDim,const AcDbObjectId& idLay,
								  BOOL bElbowLine,BOOL bWelDot,int nCr,AecDbObjXDataMap* pXDataMap)
{
	if (bElbowLine)
	{
		MakePoly(ptSta,ptMid,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
		MakePoly(ptMid,ptEnd,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	}
	else
	{
		AcGeVector3d vtNorm = vtEnd.crossProduct(vtSta);
		AcGeVector3d vtStaV = vtSta;
		vtStaV.rotateBy(PI / 2.0,vtNorm);

		AcGeVector3d vtEndV = vtEnd;
		vtEndV.rotateBy(PI / 2.0,vtNorm);

		AcGeLine3d ln1(ptSta,vtStaV);
		AcGeLine3d ln2(ptEnd,vtEndV);

		AcGePoint3d ptCen;
		if ( ln1.intersectWith(ln2,ptCen) )
		{
			AcDbCircle cir;
			cir.setCenter(ptCen);
			cir.setRadius(ptSta.distanceTo(ptCen));
			cir.setNormal(vtNorm);

			AcGePoint3dArray pts;
			pts.append(ptSta);
			pts.append(ptEnd);

			AcDbVoidPtrArray arCrvptrs;
			cir.getSplitCurves(pts,arCrvptrs);

			AcDbLine ln;
			ln.setStartPoint(ptMid);
			ln.setEndPoint(ptCen);
			ln.setNormal(vtNorm);

			AcDbCurve* pArc = NULL;
			AcDbCurve* pCrv = NULL;

			for (int i = 0;i < arCrvptrs.length();i++)
			{
				pCrv = (AcDbCurve*)arCrvptrs.at(i);

				pts.setLogicalLength(0);
				ln.intersectWith(pCrv,AcDb::kOnBothOperands,pts);

				if (pts.length() > 0)
				{
					pArc = pCrv;
					break;
				}
				else
				{
					delete pCrv;
				}
			}

			if (pArc != NULL)
			{
				double dSta = 0.0,dEnd = 0.0;
				pArc->getStartParam(dSta);
				pArc->getEndParam(dEnd);

				double dStep = (dEnd - dSta) / 5;
				AcGePoint3d ptGe;

				AcDbPolyline* pPoly = new AcDbPolyline;
				for (int i = 0;i <= 5;i++)
				{
					pArc->getPointAtParam(dSta + i * dStep,ptGe);

					if (!m_bWasDone)
					m_xform.GetTransformByThis(ptGe);

					pPoly->addVertexAt(i,ptGe.convert2d(AcGePlane::kXYPlane));
				}
				pPoly->setConstantWidth(dPlotPipeW * m_dScale);
				pPoly->setLayer(idLay);
				pPoly->setColorIndex(nCr);
				pPoly->setNormal(AcGeVector3d::kZAxis);

				if (pXDataMap != NULL)
				{
					pXDataMap->Write(pPoly,BIMDATA_APP);
				}
				AddISOEnt(pPoly);

				if (nPipeDim) //标注
				{
					AcGePoint3d ptSta1 = ptSta;
					AcGePoint3d ptEnd1 = ptEnd;
					AcGePoint3d ptMid1 = ptMid;

					MakeDim(ptSta1,ptMid1,ptSta1.distanceTo(ptMid));
					MakeDim(ptMid1,ptEnd1,ptEnd1.distanceTo(ptMid));
				}
			}
		}
	}
	//焊接点
	if (bWelDot)
	{
		//绘制法兰线
		AcGePoint3d ptSta1 = ptSta;
		AcGePoint3d ptEnd1 = ptEnd;
		AcGePoint3d ptMid1 = ptMid;

		AcGeVector3d vtS = ptEnd1 - ptMid1;
		vtS.normalize();

		AcGeVector3d vtE = ptSta1 - ptMid1;
		vtE.normalize();

		AcGePoint3d ptGe[2];
		ptGe[0] = ptSta1 + vtS * dPlotDotD * m_dScale;
		ptGe[1] = ptSta1 - vtS * dPlotDotD * m_dScale;
		MakePoly(ptGe[0],ptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

		ptGe[0] = ptEnd1 + vtE * dPlotDotD * m_dScale;
		ptGe[1] = ptEnd1 - vtE * dPlotDotD * m_dScale;
		MakePoly(ptGe[0],ptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	}
}

void AecISODrawMake::MakeReducer(AcGePoint3d ptGe0,AcGePoint3d ptGe1,double dPlotPipeW,double dPlotDotD,int nPipeDim,const AcDbObjectId& idLay,BOOL bWelDot,int nCr/* = 256*/,AecDbObjXDataMap* pXDataMap)
{
	MakePoly(ptGe0,ptGe1,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

	//焊接点
	if (bWelDot)
	{
		MakeWDot(ptGe0,idLay,dPlotDotD * m_dScale);
		MakeWDot(ptGe1,idLay,dPlotDotD * m_dScale);
	}

	if (nPipeDim) //标注
	MakeDim(ptGe0,ptGe1,ptGe0.distanceTo(ptGe1));
}

void AecISODrawMake::MakeHReducer(AcGePoint3d ptGe0,AcGePoint3d ptGe1,double dPlotPipeW,double dPlotDotD,int nPipeDim,const AcDbObjectId& idLay,BOOL bWelDot,int nCr/* = 256*/,AecDbObjXDataMap* pXDataMap)
{
	MakePoly(ptGe0,ptGe1,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

	//焊接点
	if (bWelDot)
	{
		AcGeVector3d vt = ptGe1 - ptGe0;
		vt.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
		vt.normalize();

		AcGePoint3d ptGe[2];
		ptGe[0] = ptGe0 + vt * dPlotDotD * m_dScale;
		ptGe[1] = ptGe0 - vt * dPlotDotD * m_dScale;
		MakePoly(ptGe[0],ptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

		ptGe[0] = ptGe1 + vt * dPlotDotD * m_dScale;
		ptGe[1] = ptGe1 - vt * dPlotDotD * m_dScale;
		MakePoly(ptGe[0],ptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	}

	if (nPipeDim) //标注
	MakeDim(ptGe0,ptGe1,ptGe0.distanceTo(ptGe1));
}

void AecISODrawMake::MakeTeeISO(AcGePoint3d ptGe0,AcGePoint3d ptGe1,AcGePoint3d ptGe2,AcGePoint3d ptMid,
								double dPlotPipeW,double dPlotDotD,int nPipeDim,const AcDbObjectId& idLay,BOOL bWelDot,int nCr/* = 256*/,AecDbObjXDataMap* pXDataMap)
{
	MakePoly(ptGe0,ptMid,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(ptGe1,ptMid,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(ptGe2,ptMid,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

	//焊接点
	if (bWelDot)
	{
		MakeWDot(ptGe0,idLay,dPlotDotD * m_dScale);
		MakeWDot(ptGe1,idLay,dPlotDotD * m_dScale);
		MakeWDot(ptGe2,idLay,dPlotDotD * m_dScale);
	}

	if (nPipeDim > 0)
	{
		MakeDim(ptGe0,ptMid,ptGe0.distanceTo(ptMid));
		MakeDim(ptGe1,ptMid,ptGe1.distanceTo(ptMid));
		MakeDim(ptGe2,ptMid,ptGe2.distanceTo(ptMid));
	}
}

void AecISODrawMake::MakeHTeeISO( AcGePoint3d ptGe0,AcGePoint3d ptGe1,AcGePoint3d ptGe2,AcGePoint3d ptMid,
								  double dPlotPipeW,double dPlotDotD,int nPipeDim,const AcDbObjectId& idLay,BOOL bWelDot,int nCr/* = 256*/,AecDbObjXDataMap* pXDataMap)

{
	MakePoly(ptGe0,ptMid,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(ptGe1,ptMid,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(ptGe2,ptMid,idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

	//焊接点
	if (bWelDot)
	{
		AcGeVector3d vtS = ptGe2 - ptMid;
		vtS.normalize();

		AcGeVector3d vtB = ptGe1 - ptGe0;
		vtB.normalize();

		AcGePoint3d ptGe[2];
		ptGe[0] = ptGe0 + vtS * dPlotDotD * m_dScale;
		ptGe[1] = ptGe0 - vtS * dPlotDotD * m_dScale;
		MakePoly(ptGe[0],ptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

		ptGe[0] = ptGe1 + vtS * dPlotDotD * m_dScale;
		ptGe[1] = ptGe1 - vtS * dPlotDotD * m_dScale;
		MakePoly(ptGe[0],ptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

		ptGe[0] = ptGe2 + vtB * dPlotDotD * m_dScale;
		ptGe[1] = ptGe2 - vtB * dPlotDotD * m_dScale;
		MakePoly(ptGe[0],ptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	}

	if (nPipeDim > 0)
	{
		MakeDim(ptGe0,ptMid,ptGe0.distanceTo(ptMid));
		MakeDim(ptGe1,ptMid,ptGe1.distanceTo(ptMid));
		MakeDim(ptGe2,ptMid,ptGe2.distanceTo(ptMid));
	}
}

void AecISODrawMake::MakeHCrossISO( AcGePoint3d* pptGe,double dPlotPipeW,double dPlotDotD,int nPipeDim,const AcDbObjectId& idLay,BOOL bWelDot,int nCr/* = 256*/,AecDbObjXDataMap* pXDataMap)
{
	MakePoly(pptGe[0],pptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(pptGe[2],pptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(pptGe[3],pptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(pptGe[4],pptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

	//焊接点
	if (bWelDot)
	{
		AcGeVector3d vtS;
		AcGePoint3d ptGe[2];

		for(int i = 0;i < 5;i++)
		{
			if (i == 1)
				continue;

			vtS = pptGe[i] - pptGe[1];
			vtS.normalize();
			vtS.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

			ptGe[0] = pptGe[1] + vtS * dPlotDotD * m_dScale;
			ptGe[1] = pptGe[1] - vtS * dPlotDotD * m_dScale;
			MakePoly(ptGe[0],ptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
		}
	}

	if (nPipeDim > 0)
	{
		MakeDim(pptGe[0],pptGe[2],pptGe[0].distanceTo(pptGe[2]));
		MakeDim(pptGe[4],pptGe[3],pptGe[4].distanceTo(pptGe[3]));
	}
}

void AecISODrawMake::MakeCrossISO( AcGePoint3d* pptGe,double dPlotPipeW,double dPlotDotD,int nPipeDim,const AcDbObjectId& idLay,BOOL bWelDot,int nCr/* = 256*/,AecDbObjXDataMap* pXDataMap)
{
	MakePoly(pptGe[0],pptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(pptGe[2],pptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(pptGe[3],pptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);
	MakePoly(pptGe[4],pptGe[1],idLay,dPlotPipeW * m_dScale,nCr,pXDataMap);

	//焊接点
	if (bWelDot)
	{
		MakeWDot(pptGe[0],idLay,dPlotDotD * m_dScale);
		MakeWDot(pptGe[2],idLay,dPlotDotD * m_dScale);
		MakeWDot(pptGe[3],idLay,dPlotDotD * m_dScale);
		MakeWDot(pptGe[4],idLay,dPlotDotD * m_dScale);
	}

	if (nPipeDim > 0)
	{
		MakeDim(pptGe[0],pptGe[2],pptGe[0].distanceTo(pptGe[2]));
		MakeDim(pptGe[4],pptGe[3],pptGe[4].distanceTo(pptGe[3]));
	}
}

void AecISODrawMake::MakeWDot(AcGePoint3d ptGeCen,const AcDbObjectId& idLay,double dPlotDotD)
{
	if (!m_bWasDone)
	m_xform.GetTransformByThis(ptGeCen);

	double dDotRadius = dPlotDotD * 0.5;
	AcGePoint2d ptGeCenDot = ptGeCen.convert2d(AcGePlane::kXYPlane);
	AcGePoint2d ptGe[4];
	double dBulge = tan(PI / 8.0);

	ptGe[0] = ptGeCenDot + dDotRadius * AcGeVector2d::kYAxis;
	ptGe[1] = ptGeCenDot + dDotRadius * AcGeVector2d::kXAxis;
	ptGe[2] = ptGeCenDot - dDotRadius * AcGeVector2d::kYAxis;
	ptGe[3] = ptGeCenDot - dDotRadius * AcGeVector2d::kXAxis;

	AcDbPolyline* pDot = new AcDbPolyline;
	pDot->addVertexAt(0,ptGe[0],-dBulge);
	pDot->addVertexAt(1,ptGe[1],-dBulge);
	pDot->addVertexAt(2,ptGe[2],-dBulge);
	pDot->addVertexAt(3,ptGe[3],-dBulge);
	pDot->addVertexAt(4,ptGe[0],0.0);
	pDot->setConstantWidth(dPlotDotD);
	pDot->setClosed(Adesk::kTrue);
	pDot->setNormal(AcGeVector3d::kZAxis);
	pDot->setLayer(idLay);

	AddISOEnt(pDot);
}

int Extract3dSolidOrderEdages(AcDb3dSolid* pSolid,AcDbVoidPtrArray& arLinePtrs)
{
	//临时加入db
	AcDbObjectId id; 
	id = CoreTools::AddToModelSpace(pSolid);

	if ( Acad::eOk != acdbOpenAcDbEntity((AcDbEntity*&)pSolid,id,AcDb::kForRead))
	{
		return 0;
	}

	AcBrBrep pBrep; 
	AcDbFullSubentPath _PP (id, kNullSubentId);
	pBrep.setSubentPath(_PP); 

	AcBr::ErrorStatus returnValue = AcBr::eOk; 
	AcBrBrepFaceTraverser brepFaceTrav; 
	if  (brepFaceTrav.setBrep(pBrep) != AcBr::eOk) 
	{ 
		return 0; 
	} 

	AcDbLine* pLn = NULL;
	int faceCount = 0; 
	while  (!brepFaceTrav.done() && (returnValue == AcBr::eOk))
	{ 
		faceCount++; 

		AcBrFace face; 
		if  ( brepFaceTrav.getFace(face) 
			!= AcBr::eOk) 
		{
			continue ;
		}

		AcGeSurface *pGeSurface = NULL;
		face.getSurface(pGeSurface);

		AcGeInterval intervalU, intervalV;
		pGeSurface->getEnvelope(intervalU, intervalV);

		AcBrFaceLoopTraverser faLoTrav; 
		for ( faLoTrav.setFace(face); !faLoTrav.done(); faLoTrav.next() ) 
		{ 
			AcBrLoop lp; 
			faLoTrav.getLoop(lp); 

			AcBrLoopEdgeTraverser loEdTrav; 
			if ( loEdTrav.setLoop(faLoTrav) == AcBr::eOk) 
			{ 
				int  edgeCount = 0;
				AcGePoint2dArray verts; 
				AcGeVoidPointerArray edgeArray; 
				for (;! loEdTrav.done(); loEdTrav.next()) 
				{ 
					edgeCount++;

					AcBrEdge edge; 
					loEdTrav.getEdge(edge); 

					AcBrVertex start;      
					edge.getVertex1( start );   
					AcGePoint3d stPt3d;            
					start.getPoint( stPt3d );  

					AcBrVertex end; 
					edge.getVertex2( end );   
					AcGePoint3d endPt3d;            
					end.getPoint( endPt3d ); 

					Adesk::Boolean orient = Adesk::kFalse;
					loEdTrav.getEdgeOrientToLoop(orient);
					if (orient)
					{
						pLn = new AcDbLine(stPt3d,endPt3d);
						arLinePtrs.append(pLn);
					}
					else 
					{
						pLn = new AcDbLine(endPt3d,stPt3d);
						arLinePtrs.append(pLn);
					}
				} 
			} 
		} 
		returnValue = brepFaceTrav.next(); 
	} 

	pSolid->upgradeOpen();
	pSolid->erase();
	pSolid->downgradeOpen();
	pSolid->close();

	return arLinePtrs.length();
}

static void Rotate90(AecComplexCurve& cplCurve, AcGePoint3d& ptIns, AcGeVector3d& vtDir2)
{
	AcGeMatrix3d xm;
	xm.setToRotation(PI / 2.0, vtDir2, ptIns);
	cplCurve.transformBy(xm);
}

void AecISODrawMake::MakeISOVal(AcDbObjectIdArray& arValIds,int nVal2D,double dPlotDotD,BOOL bDNDim,BOOL bDimTxtIso,BOOL bVlvISOV)
{
	AcDbObjectId id;
	AcDbEntity* pEnt = NULL;
	AecDbObjXDataMap* pXDataMap = NULL;

	AcGeVector3d vtDir,vtV,vtDir2;
	AcGePoint3d ptSta,ptEnd,ptIns;
	AcGePoint3d ptGe1,ptGe2,ptGeIns;
	AcDbEntity* pSubEnt = NULL,*pSubEnt2 = NULL;
	CString sName, sSpec, sMater, sRem, sLevel;
		
	//子实体类型绘制
	int nType = 0,nIndex = 0;

	for (int i = 0;i < arValIds.length();i++)
	{
		id = arValIds.at(i);
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead))
		{
			AecDbEwEquipment* pEqu = AecDbEwEquipment::cast(pEnt);
			if (pEqu != NULL)
			{
				pXDataMap = pEqu->GetSpecialtyData(AcDb::kForRead);

				nType = 0;
				pXDataMap->GetAt(KEY_SUBRUNTIME,nType);
				EFittingType eSubType = (EFittingType)nType;

				pEqu->GetInsert(ptGeIns,vtDir);
				
				AcDbExtents ext;
				pEqu->getGeomExtents(ext);

				vtV = ext.maxPoint() - ext.minPoint();
				vtV = vtV.orthoProject(vtDir);
				vtV.normalize();

				if ( eSubType == eValve )
				{
					//三维炸碎
					if (nVal2D)
					{
						CPoint pt;
						pt.x = m_arISOEntPtrs.length();

						//提取ISO阀门
						AcDbCurve* pCurve = NULL;
						AecComplexCurve cplCurve;

						bool bIs45 = false;
						if ( fabs(m_dISOAngle - PI / 4.0) < 1.e-6)
							bIs45 = true;

						pEqu->DrawValveForISO(cplCurve,true,bIs45);

						AcDbVoidPtrArray arHdFlg;
						AcGiExplodeDraw dc(arHdFlg);
						pEqu->DrawHandFlg(dc);

						//如果水平阀门需求竖直放置
						pEqu->GetInsert(ptIns, vtDir2);
						
						if (vtDir2.isPerpendicularTo(AcGeVector3d::kZAxis) &&
							bVlvISOV)
						{
							Rotate90(cplCurve, ptIns, vtDir2);
						}

						int nColor = kColorByLayer;
						if (pXDataMap != NULL && pXDataMap->GetAt(_T("COLOR"), nColor))
						{
						}

						for (int j = 0;j < cplCurve.length();j++)
						{
							pCurve = cplCurve.segat(j);
							if (pCurve != NULL)
							{
								pCurve->setLayer(pEqu->layerId());
								pCurve->setColorIndex(kColorByLayer);
								CovertToISO(pCurve,pXDataMap);
							}
							if (pCurve != NULL) delete pCurve;
						}

						
						for (int j = 0;j < arHdFlg.length();j++)
						{
							pSubEnt2 = (AcDbEntity*)arHdFlg.at(j);
							pSubEnt2->setLayer(pEqu->layerId());
							pSubEnt2->setColorIndex(kColorByLayer);
							CovertToISO(pSubEnt2, pXDataMap);
						}

						pt.y = m_arISOEntPtrs.length() - 1;
						if (pt.y > pt.x)
						{
							m_arGrpIdx.Add(pt);
						}
					}
					else //有问题，产生乱线2025-11-3!! 上游注释掉
					{
						AcDbVoidPtrArray arEntPtrs;
						AcGiExplodeDraw dc(arEntPtrs);
						pEqu->Draw2d(dc);

						CPoint pt;
						pt.x = m_arISOEntPtrs.length();

						for (int j = 0;j < arEntPtrs.length();j++)
						{
							pSubEnt = (AcDbEntity*)arEntPtrs.at(j);

							AcDbArc *pArc = AcDbArc::cast(pSubEnt);
							AcDbEllipse* pEArc = AcDbEllipse::cast(pSubEnt);
							AcDbSpline* pSPL = AcDbSpline::cast(pSubEnt);
							AcDb3dSolid* pSolid = AcDb3dSolid::cast(pSubEnt);

							if (pArc != NULL ||
								pEArc != NULL ||
								pSPL != NULL )
							{
								AcGePoint3dArray arpts;
								PipelineTools::GetSamplePoints(pArc, arpts);
								for (int i = 0; i < arpts.length() - 1; ++i)
								{
									AcDbLine *pLine = new AcDbLine(arpts[i], arpts[i + 1]);

									AcGePoint3d ptSta = pLine->startPoint();
									AcGePoint3d ptEnd = pLine->endPoint();

									if (!m_bWasDone)
									{
										m_xform.GetTransformByThis(ptSta);
										m_xform.GetTransformByThis(ptSta);
									}

									pLine->setStartPoint(ptSta);
									pLine->setEndPoint(ptEnd);
									pXDataMap->Write(pLine,BIMDATA_APP);
									AddISOEnt(pLine);
								}
							}
							else if (pSolid != NULL)
							{
								AcDbVoidPtrArray arLnPtrs;
								Extract3dSolidOrderEdages(pSolid,arLnPtrs);

								AcDbEntity* pEntT = NULL;
								for (int ii = 0;ii < arLnPtrs.length();ii++)
								{
									pEntT = (AcDbEntity*)arLnPtrs.at(ii);
									AcDbLine* pLnT = AcDbLine::cast(pEntT);
									if (pLnT != NULL)
									{
										AcGePoint3d ptSta = pLnT->startPoint();
										AcGePoint3d ptEnd = pLnT->endPoint();

										double dDis = ptSta.distanceTo(ptEnd);
										if (dDis < 1.e-1)
										{
											arLnPtrs.removeAt(ii);
											ii -= 1;
											continue;
										}

										if (!m_bWasDone)
										{
											m_xform.GetTransformByThis(ptSta);
											m_xform.GetTransformByThis(ptEnd);
										}

										pLnT->setStartPoint(ptSta);
										pLnT->setEndPoint(ptEnd);
										pXDataMap->Write(pLnT,BIMDATA_APP);
										AddISOEnt(pLnT);
									}
								}
								arEntPtrs.removeAt(j);
								j -= 1;
							}
							else
							{
								AcDbCurve *pCurve = (AcDbCurve*)pSubEnt->clone();
								if (pCurve)
								{
									if (!m_bWasDone)
									m_xform.GetTransformByThis(pCurve);

									pXDataMap->Write(pCurve,BIMDATA_APP);
									AddISOEnt(pCurve);
								}
							}
						}

						pt.y = m_arISOEntPtrs.length() - 1;
						if (pt.y > pt.x)
						{
							m_arGrpIdx.Add(pt);
						}
					}

					/*if (bDNDim)
					{
						double dDn = 0.0;
						pXDataMap->GetAt(PIPE_DN,dDn);
						ptGeIns += vtV * 2.0 * dDn;
						ptSta = ptGeIns - vtDir * 10.0;
						ptEnd = ptGeIns + vtDir * 10.0;
						MakeDim3(pXDataMap,ptSta,ptEnd,pEqu->layer(),dPlotDotD * m_dScale,bDimTxtIso);
					}*/

					sName = _T("阀门");
					pXDataMap->GetAt(KEY_NAME, sName);
					pXDataMap->GetAt(PIPE_LEVEL, sLevel);
					pXDataMap->GetAt(PIPE_DESCR, sRem);

					if (!sName.IsEmpty())
					{
						sSpec = sName;
						int nIndex = AddFitDimtName(sName, sSpec, sMater, sRem, sLevel);

						vtV.set(-1, -1, 0);
						DimIndex(nIndex, ptGeIns, vtV, id);
					}
				}
			}
			pEnt->close();
		}
	}
}

void AecISODrawMake::MakeISOHanger(AcDbObjectIdArray& arHangIds, double dPlotDotD,int nPipeDim, int nFitDim)
{
	CMapStringToString mapNameToRomaIndex;
	int nRomIndex = 0;
	AcGeVector3d vtDirT;
	AcGePoint3d ptPos;
	AcDbLine lnDir;
	AcDbObjectId id;
	AcDbEntity *pEnt = NULL,*pSubEnt = NULL;
	for (int i = 0;i < arHangIds.length();i++)
	{
		id = arHangIds.at(i);
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
		{
			AecDbEntityBase *pAecEnt = AecDbEntityBase::cast(pEnt);
			if (pAecEnt != NULL)
			{
				AecDbPipeHanger *pPHg = AecDbPipeHanger::cast(pAecEnt);
				if (pPHg == NULL)
				{
					pEnt->close();
					continue;
				}

				pPHg->GetDirLine(lnDir);

				AecDbObjXDataMap *pXData = pAecEnt->GetSpecialtyData(AcDb::kForRead);
				int n2dStyle = 0;
				pXData->GetAt(_T("2dStl"), n2dStyle);

				AcDbVoidPtrArray arEntPtrs;
				pAecEnt->GetDraw2dables(n2dStyle, arEntPtrs);

				for (int n = 0;n < arEntPtrs.length();n++)
				{
					pSubEnt = (AcDbEntity *)arEntPtrs.at(n);
					AcDbLine *pSubLine = AcDbLine::cast(pSubEnt);
					if (pSubLine != NULL)
					{
						MakePoly(pSubLine->startPoint(), pSubLine->endPoint(), pAecEnt->layerId(),0,kColorByLayer, pXData);
					}
				}

				//标标注
				if (m_nDimIndex)
				{
					CString sName, sName2,sSubTxt, sPNo, sTmp, sKey, sIndex, sRem;
					double dVal = 0.0;

					pXData->GetAt(KEY_NAME, sName);

					//钢筋混凝土墙、柱预埋件式单管托架图(一)(DN15-150)  --->
					//钢筋混凝土墙、柱预埋件式单管托架图(一)
					sName2 = sName;
					int nPos = sName.Find(_T('('));
					if (nPos != -1)
					{
						sName2 = sName.Mid(0, nPos);
						sName2.TrimRight(_T("图"));
					}
					sName2.Insert(0, _T(" "));
					sName = sName2;
					//acutPrintf(_T("\n%s"),sName);

					double dDN = 0.0;
					pXData->GetAt(_T("DN"), dDN);
					sTmp.Format(_T("(DN%d)"), (int)(dDN + 0.5));
					sName += sTmp;

					pPHg->GetAt(_T("DN"), dDN);
					sTmp.Format(_T("DN%d "), (int)(dDN + 0.5));
					sSubTxt += sTmp;

					dVal = 0;
					if (pPHg->GetAt(_T("L1"), dVal))
					{
						sTmp.Format(_T("L1=%d "), (int)(dVal + 0.5));
						sSubTxt += sTmp;
					}
					dVal = 0;
					if (pPHg->GetAt(_T("L2"), dVal))
					{
						sTmp.Format(_T("L2=%d "), (int)(dVal + 0.5));
						sSubTxt += sTmp;
					}
					dVal = 0;
					if (pPHg->GetAt(_T("L3"), dVal))
					{
						sTmp.Format(_T("L3=%d "), (int)(dVal + 0.5));
						sSubTxt += sTmp;
					}
					dVal = 0;
					if (pPHg->GetAt(_T("H"), dVal))
					{
						sTmp.Format(_T("H=%d "), (int)(dVal + 0.5));
						sSubTxt += sTmp;
					}
					dVal = 0;
					if (pPHg->GetAt(_T("H1"), dVal))
					{
						sTmp.Format(_T("H1=%d "), (int)(dVal + 0.5));
						sSubTxt += sTmp;
					}
					dVal = 0;
					if (pPHg->GetAt(_T("H2"), dVal))
					{
						sTmp.Format(_T("H2=%d "), (int)(dVal + 0.5));
						sSubTxt += sTmp;
					}

					sPNo = _T("");
					pPHg->GetAt(_T("PAGENO"), sPNo);
					sRem.Format(_T(" 03S402室内管道支架及吊架 第%s页"), sPNo);

					PipeHangerRec pgr;
					memset(&pgr, 0, sizeof(PipeHangerRec));
					_tcscpy(pgr.szName, (LPCTSTR)sName);
					_tcscpy(pgr.szSubTxt, (LPCTSTR)sSubTxt);
					_tcscpy(pgr.szRem, (LPCTSTR)sRem);

					AppendPipeHgr(mapNameToRomaIndex, nRomIndex,pgr, sIndex);

					ptPos = MidPoint(lnDir.startPoint(), lnDir.endPoint());
					vtDirT = lnDir.endPoint() - lnDir.startPoint();
					vtDirT.rotateBy(PI / 3.0, AcGeVector3d::kZAxis);

					//标注
					DimIndex(sIndex, ptPos, vtDirT, id);
				}

				//定位尺寸标注
				if (nPipeDim)
				{

				}
			}
			pEnt->close();
		}
	}
}

bool AecISODrawMake::AppendPipeHgr(CMapStringToString& mapNameToRomaIndex, int& nRomIndex, PipeHangerRec &pgr, CString &sIndex)
{
	//默认20种支吊架
	const LPCTSTR pszRomaIndex[] = { _T("Ⅰ"),_T("Ⅱ"),_T("Ⅲ"),_T("Ⅳ"),_T("Ⅴ"),_T("Ⅵ"),_T("Ⅶ"),_T("Ⅷ"),_T("Ⅸ"),_T("Ⅹ"),
		_T("Ⅺ"),_T("Ⅻ"),_T("XIII"),_T("XIV"),_T("XV"),_T("XVI"),_T("XVII"),_T("XVIII"),_T("XIX"),_T("XX"),NULL };
	const int nRomaMaxIndex = 20;

	CString sName = pgr.szName;
	if (mapNameToRomaIndex.Lookup(sName, sIndex))
	{
	}
	else
	{
		if (nRomIndex < nRomaMaxIndex)
		{
			sIndex = pszRomaIndex[nRomIndex];

			nRomIndex += 1;
			mapNameToRomaIndex.SetAt(sName, sIndex);
		}
		else
		{
			//索引不够
			sIndex.Format(_T("支%d"), nRomIndex);
			mapNameToRomaIndex.SetAt(sName, sIndex);
			nRomIndex += 1;
		}
	}

	CString sKey;
	sKey.Format(_T("%s%s"), pgr.szName, pgr.szSubTxt);
	sKey.TrimLeft(); sKey.TrimRight();

	bool bFind = false;
	for (int i = 0; i < m_arHngrRess.GetSize(); i++)
	{
		PipeHangerRec &pgrt = m_arHngrRess.GetAt(i);
		if (_tcscmp(pgrt.szKey, (LPCTSTR)sKey) == 0)
		{
			pgrt.nCount += 1;
			bFind = true;
			break;
		}
	}
	if (!bFind)
	{
		_tcscpy(pgr.szKey, sKey);
		pgr.nCount = 1;
		_tcscpy(pgr.szIndex, (LPCTSTR)sIndex);
		m_arHngrRess.Add(pgr);
	}

	return true;
}

static void FreeBuffer(int n, AcDbVoidPtrArray& arEntPtrs)
{
	AcDbEntity* pEnt = NULL;
	while (arEntPtrs.length() > n)
	{
		pEnt = (AcDbEntity*)arEntPtrs.last();
		DELETE_PTR(pEnt);
		
		//TEST
		//pEnt->setColorIndex(1);
		//CoreTools::AddToModelSpace(pEnt);
		
		arEntPtrs.removeLast();
	}
}

void AecISODrawMake::MakeISOEquipment(AcDbObjectIdArray& arEquIds,double dPlotDotD)
{
	AcDbObjectId id;
	AcDbEntity* pEnt = NULL;
	AecDbObjXDataMap* pXDataMap = NULL;

	AcGePoint3d ptGe1,ptGe2;
	AcDbEntity* pSubEnt = NULL;

	//子实体类型绘制
	int nType = 0,nIndex = 0;

	for (int i = 0;i < arEquIds.length();i++)
	{
		id = arEquIds.at(i);
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead))
		{
			AecDbEwEquipment* pEqu = AecDbEwEquipment::cast(pEnt);
			if (pEqu != NULL)
			{
				pXDataMap = pEqu->GetSpecialtyData(AcDb::kForRead);

				nType = 0;
				pXDataMap->GetAt(KEY_SUBRUNTIME,nType);
				EFittingType eSubType = (EFittingType)nType;
			
				if ( eSubType != eValve )
				{
					//三维炸碎, 需要真实3D位置
					AcDbVoidPtrArray arEntPtrs;
					AcGiExplodeDraw dc(arEntPtrs);
					pEqu->Draw2d(dc);

					CPoint pt;
					pt.x = m_arISOEntPtrs.length();

					for (int j = 0;j < arEntPtrs.length();j++)
					{
						pSubEnt = (AcDbEntity*)arEntPtrs.at(j);
						AcDbArc *pArc = AcDbArc::cast(pSubEnt);
						AcDbEllipse* pEArc = AcDbEllipse::cast(pSubEnt);
						AcDbSpline* pSPL = AcDbSpline::cast(pSubEnt);
						AcDb3dSolid* pSolid = AcDb3dSolid::cast(pSubEnt);

						if (pArc != NULL ||
							pEArc != NULL ||
							pSPL != NULL)
						{
							AcDbCurve* pCrT = AcDbCurve::cast(pSubEnt);
							AcGePoint3dArray arpts;
							PipelineTools::GetSamplePoints(pCrT, arpts);
							for (int i = 0; i < arpts.length() - 1; ++i)
							{
								AcDbLine *pLine = new AcDbLine(arpts[i], arpts[i + 1]);

								AcGePoint3d ptSta = pLine->startPoint();
								AcGePoint3d ptEnd = pLine->endPoint();

								if (!m_bWasDone)
								{
									m_xform.GetTransformByThis(ptSta);
									m_xform.GetTransformByThis(ptEnd);
								}

								pLine->setStartPoint(ptSta);
								pLine->setEndPoint(ptEnd);
								pXDataMap->Write(pLine,BIMDATA_APP);
								AddISOEnt(pLine);
							}
						}
						else if (pSolid != NULL)
						{
							AcDbVoidPtrArray arLnPtrs;
							Extract3dSolidOrderEdages(pSolid,arLnPtrs);

							AcDbEntity* pEntT = NULL;
							for (int ii = 0;ii < arLnPtrs.length();ii++)
							{
								pEntT = (AcDbEntity*)arLnPtrs.at(ii);
								AcDbLine* pLnT = AcDbLine::cast(pEntT);
								if (pLnT != NULL)
								{
									AcGePoint3d ptSta = pLnT->startPoint();
									AcGePoint3d ptEnd = pLnT->endPoint();

									double dDis = ptSta.distanceTo(ptEnd);
									if (dDis < 1.e-1)
									{
										arLnPtrs.removeAt(ii);
										ii -= 1;
										continue;
									}

									if (!m_bWasDone)
									{
										m_xform.GetTransformByThis(ptSta);
										m_xform.GetTransformByThis(ptEnd);
									}

									pLnT->setStartPoint(ptSta);
									pLnT->setEndPoint(ptEnd);
									pXDataMap->Write(pLnT,BIMDATA_APP);
									AddISOEnt(pLnT);
								}
							}
							arEntPtrs.removeAt(j);
							j -= 1;
						}
						else
						{
							AcDbCurve *pCurve = (AcDbCurve*)pSubEnt->clone();
							if (pCurve)
							{
								if (!m_bWasDone)
								m_xform.GetTransformByThis(pCurve);

								pXDataMap->Write(pCurve,BIMDATA_APP);
								AddISOEnt(pCurve);
							}
						}
					}

					FreeBuffer(0,arEntPtrs);

					pt.y = m_arISOEntPtrs.length() - 1;
					if (pt.y > pt.x)
					{
						m_arGrpIdx.Add(pt);
					}
				}
			}
			pEnt->close();
		}
	}
}

void AecISODrawMake::GetISOEntities(AcDbVoidPtrArray& arISOEntPtrs,AcDbExtents& ext)
{
	arISOEntPtrs.append(m_arISOEntPtrs);

	AcDbEntity* pEnt = NULL;
	AcDbExtents ext1;
	for (int i = 0;i < arISOEntPtrs.length();i++)
	{
		pEnt = (AcDbEntity*)arISOEntPtrs.at(i);
		if (i == 0)
		{
			pEnt->getGeomExtents(ext);
		}
		else
		{
			pEnt->getGeomExtents(ext1);
			ext.addExt(ext1);
		}
	}
}

void AecISODrawMake::GetMaterialSheet(AcDbVoidPtrArray &arISOEntPtrs, AcDbExtents &ext)
{
	double dTxtMaxLen = 0;
	double dH = 2.5 * m_dScale;

	//需要同类排序
	AcDbExtents extT;
	for (int i = 0; i < m_arFitSumRecs.GetSize(); i++)
	{
		FitSumRec &fsmr = m_arFitSumRecs.GetAt(i);
		CKTCadUtility::GetTextBox(extT, fsmr.szDimtext, PipelineTools::gTextStyle_Pipe_Dim, dH, 1.0, 0.0);

		dTxtMaxLen = __max(dTxtMaxLen, extT.maxPoint().x - extT.minPoint().x);
		ext.addExt(extT);
	}

	//1. 材料表格
	AcDbTable *pTbl = new AcDbTable;
	pTbl->setLayer(m_idDimlay);
	pTbl->setTextStyle(m_idDimSty);

	pTbl->setNumRows(m_arFitSumRecs.GetSize() + 1);
	pTbl->setNumColumns(8);

	pTbl->setWidth(32207 + dTxtMaxLen);
	pTbl->setRowHeight(950);

	pTbl->setColumnWidth(0, 1732);
	pTbl->setColumnWidth(1, dTxtMaxLen);
	pTbl->setColumnWidth(2, 4895);
	pTbl->setColumnWidth(3, 4895);
	pTbl->setColumnWidth(4, 4895);
	pTbl->setColumnWidth(5, 4895);
	pTbl->setColumnWidth(6, 4895);
	pTbl->setColumnWidth(7, 6000);

	pTbl->setDirection(AcGeVector3d::kXAxis);
	pTbl->setPosition(AcGePoint3d::kOrigin);
	pTbl->setNormal(AcGeVector3d::kZAxis);

	//pTbl->setTableStyle();

	pTbl->setTextHeight(0, 0, 300);
	pTbl->setTextString(0, 0, _T("序号"));
	pTbl->setAlignment(0, 0, kMiddleCenter);

	pTbl->setTextHeight(0, 1, 300);
	pTbl->setTextString(0, 1, _T("名称"));
	pTbl->setAlignment(0, 1, kMiddleCenter);

	pTbl->setTextHeight(0, 2, 300);
	pTbl->setTextString(0, 2, _T("规格及型号"));
	pTbl->setAlignment(0, 2, kMiddleCenter);

	pTbl->setTextHeight(0, 3, 300);
	pTbl->setTextString(0, 3, _T("数量"));
	pTbl->setAlignment(0, 3, kMiddleCenter);

	pTbl->setTextHeight(0, 4, 300);
	pTbl->setTextString(0, 4, _T("材料"));
	pTbl->setAlignment(0, 4, kMiddleCenter);

	pTbl->setTextHeight(0, 5, 300);
	pTbl->setTextString(0, 5, _T("单重"));
	pTbl->setAlignment(0, 5, kMiddleCenter);

	pTbl->setTextHeight(0, 6, 300);
	pTbl->setTextString(0, 6, _T("总计"));
	pTbl->setAlignment(0, 6, kMiddleCenter);

	pTbl->setTextHeight(0, 7, 300);
	pTbl->setTextString(0, 7, _T("备注"));
	pTbl->setAlignment(0, 7, kMiddleCenter);

	int j = 0;
	CString sText, sTmp;
	for (int i = 0; i < m_arFitSumRecs.GetSize(); i++)
	{
		FitSumRec &fsmr = m_arFitSumRecs.GetAt(i);

		//No
		sText.Format(_T("%d"), i + 1);

		pTbl->setTextHeight(i + 1, 0, 300);
		pTbl->setTextString(i + 1, 0, sText);
		pTbl->setAlignment(i + 1, 0, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 0, m_idDimSty);

		//名称
		pTbl->setTextHeight(i + 1, 1, 300);
		pTbl->setTextString(i + 1, 1, fsmr.szDimtext);
		pTbl->setAlignment(i + 1, 1, kMiddleLeft);
		pTbl->setTextStyle(i + 1, 1, m_idDimSty);

		//规格及型号
		pTbl->setTextHeight(i + 1, 2, 300);
		pTbl->setTextString(i + 1, 2, fsmr.szSpec);
		pTbl->setAlignment(i + 1, 2, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 2, m_idDimSty);

		//数量
		sText.Format(_T("%d"), fsmr.nCount);
		pTbl->setTextHeight(i + 1, 3, 300);
		pTbl->setTextString(i + 1, 3, sText);
		pTbl->setAlignment(i + 1, 3, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 3, m_idDimSty);

		//材料
		pTbl->setTextHeight(i + 1, 4, 300);
		pTbl->setTextString(i + 1, 4, fsmr.szMat);
		pTbl->setAlignment(i + 1, 4, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 4, m_idDimSty);

		//单重
		pTbl->setTextHeight(i + 1, 5, 300);
		pTbl->setTextString(i + 1, 5, _T("-"));
		pTbl->setAlignment(i + 1, 5, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 5, m_idDimSty);

		//总计
		pTbl->setTextHeight(i + 1, 6, 300);
		pTbl->setTextString(i + 1, 6, _T("-"));
		pTbl->setAlignment(i + 1, 6, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 6, m_idDimSty);

		//备注
		pTbl->setTextHeight(i + 1, 7, 300);
		pTbl->setTextString(i + 1, 7, fsmr.szRem);
		pTbl->setAlignment(i + 1, 7, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 7, m_idDimSty);
	}
	arISOEntPtrs.append(pTbl);

	//2. 吊架表
	AcDbExtents extTbl;
	pTbl->getGeomExtents(extTbl);

	AcGePoint3d ptHgr = extTbl.minPoint();
	ptHgr.y -= (m_arFitSumRecs.GetSize() + 2) * 950.0;

	//需要同类排序
	for (int i = 0; i < m_arHngrRess.GetSize(); i++)
	{
		PipeHangerRec &phg = m_arHngrRess.GetAt(i);
		CKTCadUtility::GetTextBox(extT, phg.szName, PipelineTools::gTextStyle_Pipe_Dim, dH, 1.0, 0.0);

		dTxtMaxLen = __max(dTxtMaxLen, extT.maxPoint().x - extT.minPoint().x);
		ext.addExt(extT);
	}

	pTbl = new AcDbTable;
	pTbl->setLayer(m_idDimlay);
	pTbl->setTextStyle(m_idDimSty);

	pTbl->setNumRows(m_arHngrRess.GetSize() + 1);
	pTbl->setNumColumns(5);

	pTbl->setWidth(19500);
	pTbl->setRowHeight(950);

	pTbl->setColumnWidth(0, 1200);
	pTbl->setColumnWidth(1, 6900);
	pTbl->setColumnWidth(2, 5900);
	pTbl->setColumnWidth(3, 1200);
	pTbl->setColumnWidth(4, 4300);

	pTbl->setDirection(AcGeVector3d::kXAxis);
	pTbl->setPosition(ptHgr);
	pTbl->setNormal(AcGeVector3d::kZAxis);

	pTbl->setTextHeight(0, 0, 300);
	pTbl->setTextString(0, 0, _T("序号"));
	pTbl->setAlignment(0, 0, kMiddleCenter);

	pTbl->setTextHeight(0, 1, 300);
	pTbl->setTextString(0, 1, _T("名称"));
	pTbl->setAlignment(0, 1, kMiddleCenter);

	pTbl->setTextHeight(0, 2, 300);
	pTbl->setTextString(0, 2, _T("尺寸规格"));
	pTbl->setAlignment(0, 2, kMiddleCenter);

	pTbl->setTextHeight(0, 3, 300);
	pTbl->setTextString(0, 3, _T("数量"));
	pTbl->setAlignment(0, 3, kMiddleCenter);

	pTbl->setTextHeight(0, 4, 300);
	pTbl->setTextString(0, 4, _T("备注"));
	pTbl->setAlignment(0, 4, kMiddleCenter);

	for (int i = 0; i < m_arHngrRess.GetSize(); i++)
	{
		PipeHangerRec &pipegr = m_arHngrRess.GetAt(i);

		//No
		pTbl->setTextHeight(i + 1, 0, 300);
		//sText.Format(_T("%d"), i + 1);
		sText = pipegr.szIndex;
		pTbl->setTextString(i + 1, 0, sText);
		pTbl->setAlignment(i + 1, 0, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 0, m_idDimSty);

		//名称
		pTbl->setTextHeight(i + 1, 1, 300);
		pTbl->setTextString(i + 1, 1, pipegr.szName);
		pTbl->setAlignment(i + 1, 1, kMiddleLeft);
		pTbl->setTextStyle(i + 1, 1, m_idDimSty);

		//尺寸
		pTbl->setTextHeight(i + 1, 2, 300);
		pTbl->setTextString(i + 1, 2, pipegr.szSubTxt);
		pTbl->setAlignment(i + 1, 2, kMiddleLeft);
		pTbl->setTextStyle(i + 1, 2, m_idDimSty);

		//页码
		sTmp.Format(_T("%d"), pipegr.nCount);
		pTbl->setTextHeight(i + 1, 3, 300);
		pTbl->setTextString(i + 1, 3, sTmp);
		pTbl->setAlignment(i + 1, 3, kMiddleCenter);
		pTbl->setTextStyle(i + 1, 3, m_idDimSty);

		//备注
		pTbl->setTextHeight(i + 1, 4, 300);
		pTbl->setTextString(i + 1, 4, pipegr.szRem);
		pTbl->setAlignment(i + 1, 4, kMiddleLeft);
		pTbl->setTextStyle(i + 1, 4, m_idDimSty);
	}
	arISOEntPtrs.append(pTbl);
}

int AecISODrawMake::IsEntityInGroup(int nIndex)
{
	CPoint pt;
	for (int i = 0;i < m_arGrpIdx.GetSize();i++)
	{
		pt = m_arGrpIdx.GetAt(i);

		if (nIndex >= pt.x && nIndex <= pt.y)
		{
			if (pt.y == nIndex)
				return 2;
			return 1;
		}
	}
	return 0;
}

void AecISODrawMake::CovertToISO(AcDbEntity* pEnt,AecDbObjXDataMap* pXDataMap/* = NULL*/)
{
	AcDbLine* pLine = AcDbLine::cast(pEnt);
	if (pLine != NULL)
	{
		AcGePoint3d ptSta = pLine->startPoint();
		AcGePoint3d ptEnd = pLine->endPoint();

		if (!m_bWasDone)
		{
			m_xform.GetTransformByThis(ptSta);
			m_xform.GetTransformByThis(ptEnd);
		}

		AcDbLine* pLine2 = new AcDbLine;
		pLine2->setStartPoint(ptSta);
		pLine2->setEndPoint(ptEnd);
		pLine2->setLayer(pEnt->layerId());
		pLine2->setLinetype(KTSetting::InitLineStyle(_T("Continuous")));
		pLine2->setNormal(AcGeVector3d::kZAxis);
		if (pXDataMap != NULL)
		{
			pXDataMap->Write(pLine2,BIMDATA_APP);
		}
		AddISOEnt(pLine2);
		return;
	}

	AcDbArc* pArc = AcDbArc::cast(pEnt);
	if (pArc != NULL)
	{
		//取6个点
		double dSta = 0.0,dEnd = 0.0;
		pArc->getStartParam(dSta);
		pArc->getEndParam(dEnd);
		AcGeVector3d vtNom = pArc->normal();

		double dStep = (dEnd - dSta) / 6.0;//6等分
		AcGePoint3d ptGe;
		AcDbPolyline* pPl = new AcDbPolyline;

		for (int i = 0;i <= 6;i++)
		{
			pArc->getPointAtParam(dSta + i * dStep,ptGe);

			if (!m_bWasDone)
			m_xform.GetTransformByThis(ptGe);

			pPl->addVertexAt(i,ptGe.convert2d(AcGePlane::kXYPlane));
		}
		pPl->setNormal(AcGeVector3d::kZAxis);
		pPl->setLayer(pEnt->layerId());
		if (pXDataMap != NULL)
		{
			pXDataMap->Write(pPl,BIMDATA_APP);
		}
		AddISOEnt(pPl);
		return;
	}

	AcDbCircle *pCir = AcDbCircle::cast(pEnt);
	if (pCir != NULL)
	{
		AcGePoint3d ptCen = pCir->center();
		if (!m_bWasDone)
		{
			m_xform.GetTransformByThis(ptCen);
		}

		AcDbCircle *pCir2 = new AcDbCircle;
		pCir2->setCenter(ptCen);
		pCir2->setRadius(pCir->radius());
		pCir2->setLayer(pEnt->layerId());
		pCir2->setLinetype(KTSetting::InitLineStyle(_T("Continuous")));
		pCir2->setNormal(AcGeVector3d::kZAxis);
		if (pXDataMap != NULL)
		{
			pXDataMap->Write(pCir2, BIMDATA_APP);
		}
		AddISOEnt(pCir2);
		return;
	}

	AcDbText *pTxt = AcDbText::cast(pEnt);
	if (pTxt != NULL)
	{
		AcGePoint3d ptGe = pTxt->position();
		AcGePoint3d ptAg = pTxt->alignmentPoint();

		if (!m_bWasDone)
		{
			m_xform.GetTransformByThis(ptGe);
			m_xform.GetTransformByThis(ptAg);
		}

		double dRot = pTxt->rotation();
		AcGeVector3d vt = AcGeVector3d::kXAxis;
		vt.rotateBy(dRot, AcGeVector3d::kZAxis);
		if (!m_bWasDone)
		{
			m_xform.GetTransformByThis(vt);
			dRot = AcGeVector3d::kXAxis.angleTo(vt, AcGeVector3d::kZAxis);
		}

		AcDbText *pTxt2 = new AcDbText;
		pTxt2->setPosition(ptGe);
		pTxt2->setHorizontalMode(pTxt->horizontalMode());
		pTxt2->setVerticalMode(pTxt->verticalMode());
		pTxt2->setAlignmentPoint(ptAg);
		pTxt2->setRotation(dRot);
		pTxt2->setTextString(pTxt->textStringConst());
		pTxt2->setTextStyle(pTxt->textStyle());
		pTxt2->setHeight(pTxt->height());
		pTxt2->setWidthFactor(pTxt->widthFactor());
		pTxt2->setLayer(pTxt->layerId());
		pTxt2->setLinetype(KTSetting::InitLineStyle(_T("Continuous")));
		pTxt2->setNormal(AcGeVector3d::kZAxis);
		if (pXDataMap != NULL)
		{
			pXDataMap->Write(pTxt2, BIMDATA_APP);
		}
		AddISOEnt(pTxt2);
		return;
	}
}