// TDbPipeCanal.h: interface for the TDbPipeCanal class.
//
//////////////////////////////////////////////////////////////////////

#if !defined(AFX_TDBPIPECANAL_H__0CDE5701_7334_420A_AA7E_19F92E280C73__INCLUDED_)
#define AFX_TDBPIPECANAL_H__0CDE5701_7334_420A_AA7E_19F92E280C73__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000
/*============================================================================*
* Copyright(c), 1994-2007, Beijing Tangent Engineering Software Co.Ltd.
* 作    者:   沈睿
* 创建时间:   2009-2-26
* 描    述:   方沟
* 归属项目:   给排水
* 历史记录:    
=============================================================================*/

#include "DbPipe.h"
#include "map"

#define Canal_Corner1  0
#define Canal_Corner2  1
#define Canal_Corner3  2
#define Canal_Corner4  3
#define Canal_Corner5  4

class TDbPipeFitting;
class PS_EXP TDbPipeCanal : public TDbPipe  
{
	friend class TDbCanalFitting;
    DECLARE_TENTBASE();
    ACRX_DECLARE_MEMBERS(TDbPipeCanal);   
private:
    static const Adesk::UInt8 g_nVersion;
public:
	TDbPipeCanal();
	virtual ~TDbPipeCanal();
protected:
    double	m_nWidth;		// 方沟宽度  
    double  m_nHeight;      // 方沟高度 或者 电缆沟沟深
    double  m_nSpare;       // 倒角半径
	double  m_dRate;
	Adesk::UInt16     m_nCanalType;   //倒角类型
	Adesk::UInt16     m_nEntType;    //多个实体可以使用
	XString m_sSpare;
    AcDbHardPointerId m_idDoteLayer;

public:
  
    double GetWidth() const {
        return m_nWidth;
    }
    void SetWidth(double nWidth) {
        assertWriteEnabled();
        m_nWidth = nWidth;
//		m_nSpare = nWidth;
    }
    double GetHeight() const {
        return m_nHeight;
    }
    void SetHeight(double nHeight) {
        assertWriteEnabled();
        m_nHeight = nHeight;
		// cet 2016.8.25 add 起始点方沟高度相同
		SetStartHeight(nHeight);
		SetEndHeight(nHeight);
    }
    double GetSpare() const {
        return m_nSpare;
    }
    void SetSpare(double nSpare) {
        assertWriteEnabled();
        m_nSpare = nSpare;
    }
    void SetDoteLayer(const AcDbObjectId& id) {
        assertWriteEnabled();
        m_idDoteLayer=id;
    }
	void SetCanalType(Adesk::UInt16 nType){
		assertWriteEnabled();
		m_nCanalType = nType;
	}
	int GetCanalType(){
		return m_nCanalType;
	}
	void SetEntType(Adesk::UInt16 nType){
		assertWriteEnabled();
		m_nEntType = nType;
	}
	int GetEntType(){
		return m_nCanalType;
	}
    AcDbObjectId GetDoteLayer() const {
        return m_idDoteLayer;
    }
	// cet 2016.8.15 add 盖板线宽
	void SetCoverLineWidth(double dLineWidth);
	double GetCoverLineWidth() const;
	// cet 2016.8.15 add 是否为暗沟
	void SetBlindDrain(bool bVal);
	bool IsBlineDrain() const;
    // cet 2016.8.15 add 盖板样式
	void SetCoverType(int nType);
	int GetCoverType() const;
	// cet 2016.8.15 add 盖板横向间距
	void SetCoverHorDist(double dDist);
	double GetCoverHorDist() const;
	// cet 2016.8.15 add 盖板纵向间距
	void SetCoverVerDist(double dDist);
	double GetCoverVerDist() const;
	// cet 2016.8.25 add 起点方沟高度
	double GetStartHeight() const;
	void SetStartHeight(double dHeight);
	// cet 2016.8.25 add 终点方沟高度
	double GetEndHeight() const;
	void SetEndHeight(double dHeight);
	// cet 2016.9.5 add 方沟坡度
	double GetGradient() const;
	void SetGradient(double dGradient);

    void GetBrokenCurves(const XCurveSegment &cv,DList<XCurveSegment> &lstRes) const;
    
public: // Override TDbEntity
    virtual void CopyPropertiesFrom(AcDbEntity *pSrc, unsigned gMatchFlag);
    virtual Acad::ErrorStatus subGetClassID(CLSID* pClsid) const;
    virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &dc) const;
    virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &dc) const;
    virtual void GetTips(DList<TObjInfoUnit> &info) const; //取动态属性显示数据
    virtual Acad::ErrorStatus GetGripText(int i, CString &cs) const;
    virtual int GetFirstVersion()const{return 8;}
public: // Override AcDbEntity
    Acad::ErrorStatus         subGetOsnapPoints(AcDb::OsnapMode osnapMode, INT_PTR gsSelectionMark, const AcGePoint3d&	ptPick, const AcGePoint3d&	lastPoint, const AcGeMatrix3d&	viewXform, AcGePoint3dArray& snapPoints, AcDbIntArray& geomIds) const;
    virtual Acad::ErrorStatus subGetGripPoints(AcGePoint3dArray& gripPoints, AcDbIntArray&  osnapModes, AcDbIntArray&  geomIds) const;
    virtual Acad::ErrorStatus dwgInFields (AcDbDwgFiler*);
    virtual Acad::ErrorStatus dwgOutFields(AcDbDwgFiler*) const;
    virtual Acad::ErrorStatus dxfInFields (AcDbDxfFiler*);
    virtual Acad::ErrorStatus dxfOutFields(AcDbDxfFiler*) const;
	virtual Acad::ErrorStatus subTransformBy(const AcGeMatrix3d& xform);
	virtual Acad::ErrorStatus subWblockClone(AcRxObject*    pOwner,
									AcDbObject*&   pClonedObject,
									AcDbIdMapping& idMap,
									Adesk::Boolean isPrimary) const;
	// 获取指定端坐标
	XPoint GetVertexPt(const TPipeSys::PtLoction nSide) const;
  //  virtual Acad::ErrorStatus subClose();
	virtual  Acad::ErrorStatus subMoveGripPointsAt(const AcDbIntArray& indices,
		const AcGeVector3d& offset);
	
public:// Override TDbPipePrototype	
    // 派生类可以加入其他的判断条件（如管径等）
    // 自动增加节点到当前数据库，ids－该节点自动连接的管线，派生类应当重载
   // virtual AcDbObjectId AddAutoNodeToDb(const XPoint &ptAt,const DList<AcDbObjectId> &ids) const;
    virtual void ResetDrawSpeed();//重新设置显示加速数据
    // 考虑遮挡的当前曲线,二维
    void GetHideCurve(XCurveSegment& cvHide) const;

	typedef struct CornerLine
	{
		std::pair<AcGePoint3d,AcGePoint3d> pair;
		double  dAng;
	}CornerLine;
	
protected:
	Acad::ErrorStatus MoveGSPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset,BOOL bGrip);
	//绘制方沟
	void  ExplodeOrDrawPipeCanal(XExplodeDraw &dc) const;
	void  ExplodeOrDrawPipeCanalCenLine(XExplodeDraw &dc) const;
	void  ExplodeOrDrawCanalType1(XExplodeDraw &dc) const;
	void  ExplodeOrDrawCanalType2(XExplodeDraw &dc) const;
	//对方沟按逆时针排序
	void  SortPipeCanal(const AcGePoint3d &ptOr,const AcDbObjectIdArray &arIds,AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> > &arSeg) const;
	//求排序后方沟的交点
	void  GetInterPts(const AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> > &arSeg,AcArray<AcGePoint3d> &arPts,AcArray<CornerLine> &map) const;
	void  GetInterPts(const AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> > &arSeg,AcArray<AcGePoint3d> &arPts) const;
	//调整方沟位置
	void  ChangePipeCanalPosition(const AcArray<AcGePoint3d> &arPts,const AcGePoint3d &ptCen,int nSegLen,AcGePoint3d &pt1,AcGePoint3d &pt2) const;
	void  ChangePipeCanalPositionNor(const AcArray<AcGePoint3d> &arPts,const AcGePoint3d &ptCen,int nSegLen,AcGePoint3d &pt1,AcGePoint3d &pt2) const;
	//得到NODE方向方沟两点
	void  GetCannalPts(const AcDbObjectId &id,AcGePoint3d &pt1,AcGePoint3d &pt2,AcArray<CornerLine> &map) const;
	void  GetCannalPts(const AcDbObjectId &id,AcGePoint3d &pt1,AcGePoint3d &pt2) const;
	//过滤掉无用的方沟
	BOOL  FilterCannal(AcDbObjectIdArray &arIds) const;
	//得到类型2的交点
	void  GetCorner2InterPts(const XCurveSegment &seg1,const XCurveSegment &seg2,const AcGePoint3d &pt,int nSegCount,AcGePoint3dArray &arPts,AcArray<CornerLine> &map) const;
	//设置方沟类型
	void  SetCannalSameType(const AcDbObjectIdArray &arIds) const;
	//是否创建变径
	BOOL  MakesureCreateReducer(const AcDbObjectIdArray& arId,double& dTotal) const;
	void  ChangePipeCanalPosition(const AcDbObjectIdArray& arId,const AcDbObjectId& idNode,const AcGePoint3d& ptNodeLoc,double dLen,AcGePoint3d& pt1,AcGePoint3d& pt2,AcArray<CornerLine> &map) const;
	//得到另一个管子的宽度
	BOOL  GetAnotherCanalWidth(const AcGePoint3d& pt1,const AcGePoint3d& pt2,const AcDbObjectIdArray& arId,double& dWidth) const;
	//添加映射
	void  AppendMap(const AcGePoint3d& ptBase,const AcGePoint3d& pt1,const AcGePoint3d& pt2,AcArray<CornerLine> &map) const;
	//用于move时得到自身id
	AcDbObjectId  GetSelfObjectId() const;
	void GetOffsetMatrix(const AcDbObjectId& id, AcGeMatrix3d& matOffset) const;
	Acad::ErrorStatus subSubWblockClone(const AcDbObjectId& idCloning,
										AcRxObject*    pOwner,
										AcDbObject*&   pClonedObject,
										AcDbIdMapping& idMap,
										Adesk::Boolean isPrimary) const;
	virtual Acad::ErrorStatus subGetTransformedCopy(const AcGeMatrix3d& xform,  // cet 2011.5.4 add 添加原因拖动实体时，动态预览有误
													AcDbEntity*& pEnt) const;

private:

	BOOL IsHasMorePipes(const AcDbObjectId& idNode) const;  // cet 2011.6.27 add

	int GetNodeCntPipeNumber(const AcDbObjectId& idNode) const; // cet 2011.6.27 add

	BOOL GetVerticalFootPoint(const AcGePoint3d& pickPoint,const AcGePoint3d& lastPoint,AcGePoint3d& ptVerFoot) const; // cet 2011.6.27 add

	BOOL GetNearestPoint(const AcGePoint3d& pickPoint,AcGePoint3d& ptNear) const; // cet 2011.6.27 add

	void FreeBuffer(AcArray<AcDbLine*>& cplCurve) const; // cet 2011.6.27 add
	// cet 2016.8.16 add 绘制盖板
	void DrawCover(XExplodeDraw &dc, XCurveSegment &segUp, XCurveSegment &segDown) const;
	// cet 2016.8.16 add 判断端点是否连接着实体
	bool IsLinkedEntity(int nPos) const;
	bool IsLinkedEntity(XPoint pt) const;
	// cet 2016.8.18 add 端点是连接着方沟
	int LinkedPipeCanalNum(int nPos) const;
	// cet 2016.8.18 add 判断方沟端点只与一个方沟相连构成弯头连接时，在样式2、3中是否需要调整边线端点（与另一个方沟一条边的交点）位置 
	// 0 两条都需要调整 1 不需要调整左侧点 2 不需要调整右侧点
	int NeedModifyInt(int nPos, const TDbPipeFitting *pFitting) const;
	// cet 2016.8.25 add 绘制三维
	void Draw3dType(XExplodeDraw &dc) const;
	// cet 2016.8.25 add 求pt点在直线line上z轴方向的投影点（pt点在z轴方向所在直线必须与ling有交点）
	XPoint ProjectAlongZAxis(XLine &line, const XPoint &pt) const;
	// cet 2016.8.25 add 求pt点在弧线arc上z轴方向的投影点（pt点在z轴方向所在直线必须与arc有交点）
	AcGePoint3d ProjectAlongZAxis(AcGeCircArc3d &cir, const XPoint &pt) const;
};

#endif // !defined(AFX_TDBPIPECANAL_H__0CDE5701_7334_420A_AA7E_19F92E280C73__INCLUDED_)