envi-code/SourceCode/Code2026/Pool3dCmd/pool3dcmd.cpp

#include "StdAfx.h"
#include "StdArx.h"
#include "resource.h"
#include "CoreTools.h"
#include "DBReactorOfDTYG.h"
#include "AecDbFloorTreeView.h"
#include "FloorMgrDlg.h"
#include "CXMLCMainBar.h"

HINSTANCE _hdllInstance = NULL ;

#ifndef _ttof
#define _ttof(pszVal)	_tcstod((pszVal), NULL)
#endif

AcArray<AcDbEntity*> g_arFloorViewPtrs;
AcArray<int> g_viewportNumbers;
extern void ClearFloorTreeView();

void InitApplication();
void UnloadApplication();

AC_IMPLEMENT_EXTENSION_MODULE(Pool3dCmdDll);

extern "C" BOOL WINAPI DllMain(HINSTANCE hInstance, DWORD dwReason, LPVOID /*lpReserved*/)
{
	if (dwReason == DLL_PROCESS_ATTACH)
	{
        _hdllInstance = hInstance;
		Pool3dCmdDll.AttachInstance(hInstance);
	} 
	else if (dwReason == DLL_PROCESS_DETACH)
	{
		Pool3dCmdDll.DetachInstance();
	}
	return TRUE;
}

extern "C" AcRx::AppRetCode acrxEntryPoint(AcRx::AppMsgCode msg, void* pkt)
{
	switch (msg)
	{
	case AcRx::kInitAppMsg:
		acrxDynamicLinker->unlockApplication(pkt);
		acrxDynamicLinker->registerAppMDIAware(pkt);
		InitApplication();
		break;
	case AcRx::kUnloadAppMsg:
		UnloadApplication();
		break;
	}
	return AcRx::kRetOK;
}


void InitApplication()
{
	CEntityOverrule::rxInit();
	AecDbFloorTreeView::rxInit();
	acrxBuildClassHierarchy();

#define ADD_CMD(cmd, func) CoreTools::AddCommand(_T("POOL3D"), _T(#cmd),	_T(#cmd), ACRX_CMD_TRANSPARENT | ACRX_CMD_USEPICKSET, func)

	//院标设置
	ADD_CMD(PL_YBSZ, PL_YBSZCmdFnc);

	//项目楼层
	ADD_CMD(PL_XMLC, PL_XMLCCmdFnc);

	//布置轴网
	ADD_CMD(PL_BZZW, PL_BZZWCmdFnc);

	//轴网标注
	ADD_CMD(PL_ZWBZ, PL_ZWBZCmdFnc);

	//单轴标注
	ADD_CMD(PL_DZBZ, PL_DZBZCmdFnc);

	//添加轴号
	ADD_CMD(PL_TJZH, PL_TJZHCmdFnc);

	//删除轴号
	ADD_CMD(PL_SCZH, PL_SCZHCmdFnc);

	//柱网构筑
	ADD_CMD(PL_ZWGZ, PL_ZWGZCmdFnc);

	//楼层视图
	ADD_CMD(PL_LCST, PL_LCSTCmdFnc);

	// 绘制底板
	ADD_CMD(PL_HZDB, PL_DYSCCmdFnc);

	//定义水池
	void PL_HZB();
	ADD_CMD(PL_DYSC, PL_HZB);

	// 斜底板
	void PL_XDB();
	ADD_CMD(PL_HZXB, PL_XDB);

	//测试水池形状
	ADD_CMD(PL_SCXZ, PL_SCXZCmdFnc);

	//加矩形池
	ADD_CMD(PL_JJXC, PL_JJXCCmdFnc);

	//加圆形池
	ADD_CMD(PL_JYXC, PL_JYXCCmdFnc);

	//加椭圆池
	ADD_CMD(PL_JTYC, PL_JTYCCmdFnc);

	//修改水池->作废->改为通过夹点修改
	ADD_CMD(PL_XGSC, PL_XGSCCmdFnc);

	//加方锥井
	ADD_CMD(PL_JFZJ, PL_JFZJCmdFnc);

	//加方圆井
	ADD_CMD(PL_JFYJ, PL_JFYJCmdFnc);

	//加圆锥井
	ADD_CMD(PL_JYZJ, PL_JYZJCmdFnc);

	//加异形井
	ADD_CMD(PL_JYXJ, PL_JYXJCmdFnc);

	//波浪地板
	ADD_CMD(PL_BLDB, PL_BLDBCmdFnc);

	//截面底板
	ADD_CMD(PL_JMDB, PL_JMDBCmdFnc);

	//旋转底板
	ADD_CMD(PL_XZDB, PL_XZDBCmdFnc);

	//底板裁剪
	ADD_CMD(PL_DBCJ, PL_DBCJCmdFnc);

	//加集水坑
	ADD_CMD(PL_JJSK, PL_JJSKCmdFnc);

	//池底开洞
	ADD_CMD(PL_CDKD, PL_CDKDCmdFnc);

	//穿管开洞
	ADD_CMD(PL_GCQB, PL_GCQBCmdFnc);

	//批量穿管开洞->多管开洞
	ADD_CMD(PL_DGKD, PL_DGKDCmdFnc);

	//池底素砼
	ADD_CMD(PL_CDST, PL_CDSTCmdFnc);

	//素砼底基
	ADD_CMD(PL_STDJ, PL_STDJCmdFnc);

	//装配造簇
	ADD_CMD(PL_ZPZC, PL_ZPZCCmdFnc);

	//构筑插簇
	ADD_CMD(PL_GZCC, PL_GZCCCmdFnc);

	//截面设计
	ADD_CMD(PL_JMSJ, PL_JMSJCmdFnc);

	//绘制沟渠
	ADD_CMD(PL_LSJM, PL_LSJMCmdFnc);

	//绘制盖板
	ADD_CMD(PL_HZGB, PL_HZGBCmdFnc);

	//单体隐藏
	ADD_CMD(PL_DTYC, PL_DTYCCmdFnc);

	//隐藏其他
	ADD_CMD(PL_YCQT, PL_YCQTCmdFnc);

	//显示其他
	ADD_CMD(PL_XSQB, PL_XSQBCmdFnc);

	//土    建
	//绘制墙体
	ADD_CMD(PL_HZQT, PL_HZQTCmdFnc);

	//绘制幕墙-->转到 ArchCmd
	//ADD_CMD(PL_HZMQ, PL_HZMQCmdFnc);

	//绘制弧墙
	ADD_CMD(PL_HZHQ, PL_HZHQCmdFnc);

	//墙体打断
	ADD_CMD(PL_QTDD, PL_QTDDCmdFnc);

	//墙体倒角
	ADD_CMD(PL_QTDJ, PL_QTDJCmdFnc);

	//墙体倒圆
	ADD_CMD(PL_QTDY, PL_QTDYCmdFnc);

	//立面拉墙
	ADD_CMD(PL_LMLQ, PL_LMLQCmdFnc);
	ADD_CMD(PL_PMLQ, PL_PMLQCmdFnc);

	//单线变墙
	ADD_CMD(PL_DXBQ, PL_DXBQCmdFnc);

	//插入柱子
	ADD_CMD(PL_CRZZ, PL_CRZZCmdFnc);

	//放置横梁
	ADD_CMD(PL_FZHL, PL_FZHLCmdFnc);

	//批量改梁
	ADD_CMD(PL_PLGL, PL_PLGLCmdFnc);

	//墙体插柱子
	ADD_CMD(PL_QTCZ, PL_QTCZCmdFnc);

	//批量改柱
	ADD_CMD(PL_PLGZ, PL_PLGZCmdFnc);

	//预埋支撑
	ADD_CMD(PL_YMZZ, PL_YMZZCmdFnc);

	//电缆沟放置支架
	ADD_CMD(PL_LGZJ, PL_LGZJCmdFnc);

	//放置支架
	ADD_CMD(PL_FZZJ, PL_FZZJCmdFnc);

	//放置吊架
	ADD_CMD(PL_FZDJ, PL_FZDJCmdFnc);

	//放置平台->代替方形圆形平台
	ADD_CMD(PL_FZPT, PL_FZPTCmdFnc);

	//放置护栏
	ADD_CMD(PL_FZHN, PL_FZHNCmdFnc);
	ADD_CMD(PL_QXHN, PL_QXHNCmdFnc);

	//平台楼梯->护栏直线楼梯
	ADD_CMD(PL_PTLT, PL_PTLTCmdFnc);

	//平台楼梯->护栏圆弧楼梯
	ADD_CMD(PL_YHLT, PL_YHLTCmdFnc);

	//圆护爬梯
	ADD_CMD(PL_YHZT, PL_YHZTCmdFnc);

	//直线爬梯
	ADD_CMD(PL_ZXPT, PL_ZXPTCmdFnc);

	//双跑楼梯
	ADD_CMD(PL_SPLT, PL_SPLTCmdFnc);

	//多段楼梯
	ADD_CMD(PL_DDLT, PL_DDLTCmdFnc);

	//墙体开洞,池壁开洞
	ADD_CMD(PL_QTKD, PL_QTKDCmdFnc);
	ADD_CMD(PL_CBKD, PL_QTKDCmdFnc);
	ADD_CMD(PL_ZLKD, PL_ZLKDCmdFnc);

	//洞口编号复位
	ADD_CMD(PL_DHFW, PL_DHFWCmdFnc);

	//洞标设置
	ADD_CMD(PL_DBSZ, PL_DBSZCmdFnc);

	//洞口标注
	ADD_CMD(PL_DKBZ, PL_DKBZCmdFnc);

	//洞口符号
	ADD_CMD(PL_DKFH, PL_DKFHCmdFnc);

	//套管标注
	ADD_CMD(PL_TGBZ, PL_TGBZCmdFnc);
	//翼环标注
	ADD_CMD(PL_YHBZ, PL_YHBZCmdFnc);

	//断墙符号
	ADD_CMD(PL_DQFH, PL_DQFHCmdFnc);

	//墙体插窗
	ADD_CMD(PL_QTCC, PL_QTCCCmdFnc);
	
	//墙体插门
	ADD_CMD(PL_QTCM, PL_QTCMCmdFnc);

	//换剖门窗
	ADD_CMD(PL_HPMC, PL_HPMCCmdFnc);

	//组合门窗
	ADD_CMD(PL_ZHMC, PL_ZHMCCmdFnc);

	//转角窗户->ArchCmd
	//ADD_CMD(PL_ZJCH, PL_ZJCHCmdFnc);

	//门窗命名
	ADD_CMD(PL_MCMM, PL_MCMMCmdFnc);

	//门三维选型
	ADD_CMD(PL_M3XX, PL_M3XXCmdFnc);

	//窗三维选型
	ADD_CMD(PL_C3XX, PL_C3XXCmdFnc);

	//放置平板
	ADD_CMD(PL_FZPB, PL_FZPBCmdFnc);

	//平板开洞
	ADD_CMD(PL_PBKD, PL_PBKDCmdFnc);

	//开洞报表
	ADD_CMD(PL_DKBB, PL_DKBBCmdFnc);

	//洞口编号
	ADD_CMD(PL_DKBH, PL_DKBHCmdFnc);

	//编号隐显
	ADD_CMD(PL_BHYX, PL_BHYXCmdFnc);

	//方形平台
	ADD_CMD(PL_FXPT, PL_FXPTCmdFnc);

	//圆形平台
	ADD_CMD(PL_YXPT, PL_YXPTCmdFnc);

	//任意屋顶
	ADD_CMD(PL_RYPD, PL_RYPDCmdFnc);

	//人字坡顶
	ADD_CMD(PL_RZPD, PL_RZPDCmdFnc);

	//攒尖坡顶
	ADD_CMD(PL_ZJPD, PL_ZJPDCmdFnc);

	//矩形坡顶
	ADD_CMD(PL_JXPD, PL_JXPDCmdFnc);

	//加老虎窗
	ADD_CMD(PL_JLHC, PL_JLHCCmdFnc);

	//测试命令
	ADD_CMD(PL_TESTT, PL_TESTCmdFnc);
	ADD_CMD(PL_FJTEST, PL_FJTESTCmdFnc);
	ADD_CMD(PL_FKCZTEST, PL_FKCZTESTCmdFnc);
	ADD_CMD(PL_FKSPTEST, PL_FKSPTESTCmdFnc);
	ADD_CMD(PL_FMCZTEST, PL_FMCZTESTCmdFnc);
	ADD_CMD(PL_FMSPTEST, PL_FMSPTESTCmdFnc);
	ADD_CMD(PL_TESTSX, SX_TESTCmdFnc);
	ADD_CMD(PL_TESTFGRLJ, FGRLJ_TESTCmdFnc);
	ADD_CMD(PL_TESTFGXSQ, FGXSQ_TESTCmdFnc);
	ADD_CMD(PL_TESTNLB, NLB_TESTCmdFnc);
	ADD_CMD(PL_BJFTEST, PL_BJFTESTCmdFnc);

	//内部支持命令
	//提取门表
	ADD_CMD(PL_TQMB, PL_TQMBCmdFnc);
	//提取窗表
	ADD_CMD(PL_TQCB, PL_TQMBCmdFnc);

	//墙体的各种测 
	ADD_CMD(WL_TESTT, WL_TESTCmdFnc);

	//单体异构
	ADD_CMD(PL_DTYG, PL_DTYGCmdFnc);

	//墙面平视
	ADD_CMD(PL_QMPS, PL_QMPSCmdFnc);

	//设备占位
	ADD_CMD(PL_SBZW, PL_SBZWCmdFnc);
	
	//放置管嘴---任意放置管嘴
	ADD_CMD(PL_RYGZ, PL_FZGZCmd);

	//俯视显示 透明显示 三维旋转
	ADD_CMD(PL_BMPS, PL_BMPSCmdFnc);
	ADD_CMD(PL_TMXS, PL_TMXSCmdFnc);
	ADD_CMD(PL_SWXZ, PL_SWXZCmdFnc);

	//剖切出图
	ADD_CMD(PL_PQCT, PL_PQCTCmdFnc);

	//折线剖切
	ADD_CMD(PL_ZXPQ, PL_ZXPQCmdFnc);

	//混凝土体积
	ADD_CMD(PL_HNTJ, PL_HNTJCmdFnc);
	ADD_CMD(PL_TQSW, PL_TQSWCmdFnc);

	//混凝土报表
	ADD_CMD(PL_MTBB, PL_HNBBCmdFnc);

	//插入单体-->总图需要
	ADD_CMD(PL_CRDT, PL_CRDTCmdFnc);

	//更新单体
	ADD_CMD(PL_GXDT, PL_GXDTCmdFnc);

	//临时命令->去除掉块
	ADD_CMD(PL_QCDK, PL_QCDKCmdFnc);

	//立管固架->作 
	ADD_CMD(PL_LGGJ, PL_LGGJCmdFnc);

	//放置支墩
	ADD_CMD(PL_FZZD, PL_FZZDCmdFnc);

	//布置桩基
	ADD_CMD(PL_BZZJ, PL_BZZJCmdFnc);

	//剖切设置
	ADD_CMD(PL_PQSZ, PL_PQSZCmdFnc);

	//KKS编码
	ADD_CMD(PL_KKSB, PL_FPBHCmdFnc);

	//编号重置
	ADD_CMD(PL_BHCZ, PL_BHCZCmdFnc);

	//编号显隐
	ADD_CMD(PL_BHXY, PL_BHXYCmdFnc);

	//墙线加粗
	ADD_CMD(PL_QXJC, PL_QXJCCmdFnc);

	//墙线擦除
	ADD_CMD(PL_QXCC, PL_QXCCCmdFnc);

	//墙线补画
	ADD_CMD(PL_QXBH, PL_QXBHCmdFnc);

	//墙线变虚
	ADD_CMD(PL_QXBX, PL_QXBXCmdFnc);

	//板线加粗
	ADD_CMD(PL_BXJC, PL_BXJCCmdFnc);

	//构件分层
	ADD_CMD(PL_GJFC, PL_GJFC2CmdFnc);

	//剖切隐藏
	ADD_CMD(PL_PQYC, PL_PQYCCmdFnc);

	//去除剖切
	ADD_CMD(PL_QQPQ, PL_QQPQCmdFnc);

	//关于
	ADD_CMD(PL_BBXX, PL_BBXXCmdFnc);

	// 绘制水槽
	ADD_CMD(PL_HZSC, PL_HZSC);

	//绘制槽壁
	ADD_CMD(PL_HZCB, PL_HZCB);

	// 水池网格
	ADD_CMD(PL_PMSJ, PL_PMSJ);

	// 平面生池
	ADD_CMD(PL_PMSC, PL_PMSC);

	//双击修改命令函数
	//命令格式: DBL_DXFNAME,DBL_DXFNAME
	ADD_CMD(DBL_AEC_DBWALL, DBL_AEC_DBWALL);
	ADD_CMD(DBL_AEC_DBCOLMN, DBL_AEC_DBCOLMN);
	ADD_CMD(DBL_AEC_DBBEAM, DBL_AEC_DBBEAM);
	ADD_CMD(DBL_AEC_DBSLAB, DBL_AEC_DBSLAB);
	ADD_CMD(DBL_AEC_X3DPART,DBL_AEC_X3DPART);
	void DBL_AEC_DBEXTENDENT();
	ADD_CMD(DBL_AEC_DBEXTENDENT,DBL_AEC_DBEXTENDENT);

	ADD_CMD(DBL_AEC_DBPARAEQUI, DBL_AEC_DBPARAEQUI);
	ADD_CMD(DBL_AEC_DBWEIR, DBL_AEC_DBWEIR);
	ADD_CMD(DBL_AEC_RIVERGROOVE, DBL_AEC_RIVERGROOVE);
	ADD_CMD(DBL_AEC_DBXBG, DBL_AEC_DBXBG);
	ADD_CMD(DBL_AEC_MULTIPARTENT, DBL_AEC_MULTIPARTENT);
	ADD_CMD(DBL_AEC_DBXEQUIPMENT, DBL_AEC_DBXEQUIPMENT);

	ADD_CMD(DBL_AEC_DBASTAIR,DBL_AEC_DBASTAIR);
	ADD_CMD(DBL_AEC_CLMSTAIR,DBL_AEC_CLMSTAIR);
	ADD_CMD(DBL_AEC_DBLSTAIR,DBL_AEC_DBLSTAIR);
	ADD_CMD(DBL_AEC_DBZSTAIR,DBL_AEC_DBZSTAIR);
	ADD_CMD(DBL_AEC_DBMRPSTAIR,DBL_AEC_DBMRPSTAIR);

	ADD_CMD(DBL_AEC_GUARDBAR,DBL_AEC_GUARDBAR);

	ADD_CMD(DBL_AEC_DBHOLDER,DBL_AEC_DBHOLDER);
	ADD_CMD(DBL_AEC_DBHANGER,DBL_AEC_DBHANGER);
	ADD_CMD(DBL_AEC_DBBOSSHOLDER,DBL_AEC_DBBOSSHOLDER);
	ADD_CMD(DBL_AEC_DBOPENING,DBL_AEC_DBOPENING);
	ADD_CMD(DBL_AEC_DBXROOF,DBL_AEC_DBXROOF);
	ADD_CMD(DBL_AEC_XDORMERWIN,DBL_AEC_XDORMERWIN);

	//沟渠
	ADD_CMD(DBL_AEC_DBEWPIPEBASE,DBL_AEC_DBEWPIPEBASE);

	//保温层
	void DBL_AEC_DBINSUL();
	ADD_CMD(DBL_AEC_DBINSUL, DBL_AEC_DBINSUL);
	
	ADD_CMD(PL_GBQQ, ModifyXEqus);

	// 管道过滤器
	void PL_GDGV();
	ADD_CMD(PL_GDGV, PL_GDGV);

	// 一般罐体
	void PL_YBGT();
	ADD_CMD(PL_YBGT, PL_YBGT);

	// 一般箱体
	void PL_YBXT();
	ADD_CMD(PL_YBXT, PL_YBXT);

	// 浅层砂滤
	void PL_QCSL();
	ADD_CMD(PL_QCSL, PL_QCSL);

	// 插喇叭口
	void PL_CLBK();
	ADD_CMD(PL_CLBK, PL_CLBK);

	// 参数底板
	void PL_CSDB();
	ADD_CMD(PL_CSDB, PL_CSDB);

	// 插入格栅
	ADD_CMD(PL_CRGS, PL_CRGS);
	// 插曝气器
	ADD_CMD(PL_CRBQ, PL_CRBQQ);
	// 插入水槽
	ADD_CMD(PL_CRSC, PL_CRSC);
	// 插集水堰
	ADD_CMD(PL_CJSY, PL_CJSY);

	// 砂水分离类
	ADD_CMD(PL_CCSJ,PL_CCSJ);
	// 螺旋泵类
	ADD_CMD(PL_CLXB,PL_CLXB);
	// 闸门类
	ADD_CMD(PL_CZM,PL_CRZM);
	// 闸门类
	ADD_CMD(PL_CQBJ,PL_CQBJ);
	// 刮泥机类
	ADD_CMD(PL_CGNJ,PL_CGNJ);
	// 浓缩机类
	ADD_CMD(PL_CNSJ,PL_CNSJ);
	// 爆气机类
	ADD_CMD(PL_CBQJ,PL_CBQJ);
	// 加药混合类
	ADD_CMD(PL_JYHH,PL_JYHH);
	// 过滤机
	ADD_CMD(PL_CGLJ,PL_CGLJ);
	// 斜板管
	ADD_CMD(PL_CXBG,PL_CXBG);
	// 插罐箱
	ADD_CMD(PL_CGX, PL_CGX);

	//水池容积
	ADD_CMD(PL_SCRJ, PL_SCRJ);

	// 井口修改
	ADD_CMD(PL_WellModify, PL_WellModify);

	// 异形构筑物
	ADD_CMD(PL_YXGZ, PL_YXGZCmdFnc);


	void PL_PMFYCmdFnc();
	ADD_CMD(PL_PMFY, PL_PMFYCmdFnc);

	// 修改异形墙截面
	ADD_CMD(PL_XGJM, PL_XGJM);

	// 异形开洞
	ADD_CMD(PL_YXKD, PL_YXKDCmdFnc);
	// 异形穿管
	ADD_CMD(PL_YXCG, PL_YXCGCmdFnc);
	// 统一墙高
	ADD_CMD(PL_TYQG, PL_TYQG);
	// 洞口编号
	ADD_CMD(PL_ZDBH, PL_DKBH);

	//点点连接
	ADD_CMD(PL_DDLJ, PL_DDLJ);

	// 平法标注
	void inertPingFaDim();
	ADD_CMD(PL_PFBZ, inertPingFaDim);
	void DBL_AEC_PFDIM();
	ADD_CMD(DBL_AEC_PFDIM, DBL_AEC_PFDIM);

	//防腐涂面
	ADD_CMD(PL_FFTM, PL_FFTM);

	//建保温层
	ADD_CMD(PL_JBWC, PL_JBWC);

	//保温融合
	ADD_CMD(PL_BWRH, PL_BWRH);

	//保温统计
	ADD_CMD(PL_BWTJ, PL_BWTJ);

	//涂面统计
	ADD_CMD(PL_TMTJ, PL_TMTJ);

	//外墙贴皮
	ADD_CMD(PL_WQTP, PL_WQTP);

	//独立基础
	void PL_DLJC();
	ADD_CMD(PL_DLJC, PL_DLJC);

}

extern CFloorMgrDlg * g_pFloorMgrDlg;
extern CXMLCMainBar *g_wndXMLCDlgBar;
void UnloadApplication()
{
	ClearFloorTreeView();
	deleteAcRxClass(CEntityOverrule::desc());
	deleteAcRxClass(AecDbFloorTreeView::desc());
	acedRegCmds->removeGroup(_T("POOL3D"));

	//old dlg delete
	if (g_pFloorMgrDlg != NULL)
		delete g_pFloorMgrDlg;

	if (g_wndXMLCDlgBar != NULL)
		delete g_wndXMLCDlgBar;
	g_wndXMLCDlgBar = NULL;
}