envi-code/SourceCode/Code2026/tg_shs/shs_kernal/TDbStruSlabHole.cpp

//------------------------------------------------------------------------+
// Copyright (C), 1998-2011, Beijing Tangent Software Co. Ltd.
// = FileName	:   TDbStruSlabHole类
// = Version	:   ver1.0
// = Author		:   cet
// = CreateDate	:   2011-06-15
// = Description:   结构板洞类实现
// = Maintainers: 
//                  
//------------------------------------------------------------------------+

#include "stdafx.h"
#ifdef TASD
#include "TDbStruSlabHole.h"
#include "TAsdKeyDefine.h"
#include "TDbStruFloorSlab.h"
#include "TBaseWallIntegrateTool.h"
#include "TConfigInfo.h"

extern bool g_bShowZX;			// 是否显示折线
extern bool g_bHatch;			// 是否填充
extern CString g_sHatchType;    // 填充样式

ACRX_DXF_DEFINE_MEMBERS(TDbStruSlabHole, TDbStruHole, AcDb::kDHL_CURRENT,
						AcDb::kMReleaseCurrent, 1, ATS_STRUSLABHOLE,
						"ATS_STRUSLABHOLE图形无法解析, 请下载上华软件|网址: www.shanghuasoft.com");
IMPLEMENT_TENTBASE(TDbStruSlabHole);

TDbStruSlabHole::TDbStruSlabHole()
{

}

TDbStruSlabHole::~TDbStruSlabHole()
{

}

Acad::ErrorStatus TDbStruSlabHole::subGetOsnapPoints( AcDb::OsnapMode osnapMode, INT_PTR gsSelectionMark, const AcGePoint3d& pickPoint, const AcGePoint3d& lastPoint, const AcGeMatrix3d& viewXform, AcGePoint3dArray& snapPoints, AcDbIntArray& geomIds ) const
{
	assertReadEnabled();
	TDbStruEntityBase::subGetOsnapPoints(osnapMode, gsSelectionMark, pickPoint, lastPoint, viewXform, snapPoints, geomIds);
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subTransformBy( const AcGeMatrix3d& xform )
{
	assertWriteEnabled();
	AcGePoint3d ptLoc;
	GetAt(KEY_POS, ptLoc);
	ptLoc.transformBy(xform);
	SetAt(KEY_POS, ptLoc);
	m_polySection.TransformBy(xform);
	AcGePoint3dArray ptArr;
	GetAt(KEY_ZXPTS, ptArr);
	for (int i = 0; i < ptArr.length(); i++)
	{
		ptArr[i].transformBy(xform);
	}
	SetAt(KEY_ZXPTS, ptArr);
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subGetTransformedCopy( const AcGeMatrix3d& xform, AcDbEntity*& pEnt ) const
{
	assertReadEnabled();
	pEnt = new TDbStruSlabHole;
	pEnt->copyFrom(this);
	pEnt->transformBy(xform);
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::copyFrom( const AcRxObject* pSrc )
{
	assertWriteEnabled();
	if (pSrc != NULL)
	{
		TDbStruEntityBase::copyFrom(pSrc);
		
		TDbStruSlabHole* pHole = TDbStruSlabHole::cast(pSrc);
		if (pHole != NULL)
		{
			//setDatabaseDefaults(pHole->database());
			m_polySection.Reset();
			m_polySection = pHole->GetOutlinePoly();
			GetSpecialtyData()->Empty();
			*GetSpecialtyData() = *pHole->GetSpecialtyData();
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subGetGripPoints( AcGePoint3dArray& gripPoints, AcDbIntArray& osnapModes, AcDbIntArray& geomIds ) const
{
	assertReadEnabled();
	AcGePoint3d ptLoc;
	GetAt(KEY_POS, ptLoc);
	gripPoints.append(ptLoc);
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subGetStretchPoints( AcGePoint3dArray& stretchPoints ) const
{
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subMoveGripPointsAt( const AcDbIntArray& indices, const AcGeVector3d& offset )
{
	assertWriteEnabled();
	if (indices.length() == 1 && indices[0] == 0)
	{
		AcGeVector3d vtOffset = offset;
		vtOffset.z = 0.0;
		AcGeMatrix3d mat = AcGeMatrix3d::kIdentity;
		mat.setToTranslation(vtOffset);
		subTransformBy(mat);
	}
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subMoveStretchPointsAt( const AcDbIntArray& indices, const AcGeVector3d& offset )
{
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subGetClassID( CLSID* pClsid ) const
{
#if (ADS >= 17)
	assertReadEnabled();
#endif
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subWblockClone( AcRxObject* pOwner, AcDbObject*& pClonedObject, AcDbIdMapping& idMap, Adesk::Boolean isPrimary ) const
{	
	assertReadEnabled();
	Acad::ErrorStatus es = TDbStruEntityBase::subWblockClone(pOwner, pClonedObject, idMap, isPrimary);
	if (es != Acad::eOk)
		return es;

	TDbStruSlabHole *pHole = TDbStruSlabHole::cast(pClonedObject);
	if (pHole != NULL)
	{
		pHole->GetSpecialtyData()->Empty();
		*pHole->GetSpecialtyData() = *GetSpecialtyDataReadOnly();
	} 
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::subDeepClone( AcDbObject* pOwner, AcDbObject*& pClonedObject, AcDbIdMapping& idMap, Adesk::Boolean isPrimary ) const
{
	assertReadEnabled();
	return TDbStruEntityBase::subDeepClone(pOwner, pClonedObject, idMap, isPrimary);
}

Acad::ErrorStatus TDbStruSlabHole::GetGripText( int i, CString &cs ) const
{
	assertReadEnabled();
	if (i == 0)
	{
		cs = _T("移动");
	}
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::ExplodeOrDraw3d( TGGiExplodeDrawBase &dc ) const
{
	assertReadEnabled();
	AcGeVector3d vtDir = AcGeVector3d::kZAxis;
	GetAt(KEY_NORMAL, vtDir);
	double dThick = 0.0;
	GetAt(KEY_THICK, dThick);
	AcGePoint3d ptPos = AcGePoint3d::kOrigin;
	
	if (GetAt(KEY_POS, ptPos))
	{
		// 侧面儿
		vtDir *= dThick * (-1);
		TGGePoly2D plBot(m_polySection);
		if (plBot.HasArcSegment())
			plBot.Disperse(plBot);
		dc.DrawMesh(plBot, vtDir);
	}
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::ExplodeOrDraw2d( TGGiExplodeDrawBase &dc ) const
{
	assertReadEnabled();
	AcDbObjectId idLineType = AcDbObjectId::kNull, idOldLineType = AcDbObjectId::kNull;
	GetAt(KEY_LTID, idLineType);
	idOldLineType = dc.GetLineTypeId();
	if (idLineType.isValid())
	{
		dc.SetLineType(idLineType);
	}

// 	// 填充
 	if (DocGetSlabHoleShowZX())
 	{
		DrawZX(dc);
 	}

	TGGePoly2D plBot(m_polySection);
	plBot.SetElevation(0);
	dc << plBot;

	// add by wjx on 120106 绘制板洞的折现部分(从左下到右上)
	XPoint ptLow, ptUp;
	int iType;
	TGGePoly2D poly;				// 折线部分
	GetAt(KEY_SECTYP, iType);
	if(iType == ST_CIRCLE)			// 圆洞
	{
		XPoint ptLow, ptUp;
		plBot.GetExtend(ptLow, ptUp);
		TGGeCurveSegment seg(ptLow, ptUp, 0);
		seg.SetElevation(0.0);

		TGGeCurveSegment segTemp;
		plBot.Nth(0, segTemp);
		double dBugle = -2.5;			// 折线弧度

		int n = seg.Intersection(segTemp, ptLow, ptUp);
		if(n > 0)
		{
			poly.AppendNode(ptLow, dBugle);
			
			if(n == 2)
			{
				poly.AppendNode(ptUp);
			}
			else
			{
				plBot.Nth(1, segTemp);
				n = seg.Intersection(segTemp, ptLow, ptUp);
				if(n > 0)
				{
					poly.AppendNode(ptLow);
				}
			}
		}
	}
// 	else if(iType == ST_RECT)
// 	{
// 		plBot.GetExtend(ptLow, ptUp);
// 		
// 		double dWidth = ptUp.x-ptLow.x;
// 		double dHeight = ptUp.y - ptLow.y;
// 		XPoint ptMid(ptLow.x+dHeight*0.2, ptLow.y+dHeight*0.8, 0);
// 
// 		poly.AppendNode(ptLow);
// 		poly.AppendNode(ptMid);
// 		poly.AppendNode(ptUp);
// 
// 		ads_matrix mat;
// 		double dRot;
// 		GetAt(KEY_ANG, dRot);
// 		AcGePoint3d ptLoc;
// 		GetAt(KEY_POS, ptLoc);
// 		XPoint(ptLoc).GetRotationMatrix(dRot, mat);
// 		poly.TransformBy(AsAcGeMatrix3d(mat));
// 	}
	else
	{
		// 找到左下角点和右上角点
		GetLRPoint(plBot, ptLow, ptUp);
		int nFlag;
		GetAt(KEY_STAIR, nFlag);
		if(nFlag == 1)				// 楼梯间洞
		{
			poly.AppendNode(ptLow);
			poly.AppendNode(ptUp);
		}
		else
		{
			double dWidth = ptUp.x-ptLow.x;
			double dHeight = ptUp.y - ptLow.y;

			if(iType == ST_RECT)
			{
				GetAt(KEY_B, dWidth);
				GetAt(KEY_H, dHeight);
			}

			XPoint ptMid;
			plBot.Center(ptMid);
			
			ptMid.x -= dWidth*0.2;
			ptMid.y += dHeight*0.2;

			poly.AppendNode(ptLow);
			poly.AppendNode(ptMid);
			poly.AppendNode(ptUp);
		}
	}
	dc << poly;

	dc.SetLineType(idOldLineType);

	// 板洞尺寸
	if (_tcscmp(dc.Desc(), XAcGiViewDraw::Descriptor())==0)
	{
		AcGiCommonDraw *dcCommon = ((XAcGiViewDraw &)dc).GetCommonDraw();
		if (!dcCommon->context()->isPlotGeneration())
		{
			if(DocGetShowBH() && DocGetSlabHoleShowBH())
			{
				DrawBH(dc);
			}
		}
	}
	return Acad::eOk;
}

// add by wjxon 120106
// 找到板洞左下角点和右上角的点
void TDbStruSlabHole::GetLRPoint(TGGePoly2D poly, XPoint &ptL, XPoint &ptR)const
{
	int nCount = poly.Length();
	if(nCount < 0)
	{
		return;
	}

	ptL = ptR = poly.GetPointListAt(0)->AsAcGeVector3d();

	XPoint ptTemp;
	for(int i = 1; i < nCount; i++)
	{
		ptTemp = poly.GetPointListAt(i)->AsAcGeVector3d();

		if(ptL.x - ptTemp.x > _DIST_SNAP)
		{
			ptL = ptTemp;
		}
		else if(fabs(ptL.x - ptTemp.x) < _DIST_SNAP)
		{
			if(ptL.y - ptTemp.y > _DIST_SNAP)
			{
				ptL = ptTemp;
			}
		}
	}

	for(int i = 1; i < nCount; i++)
	{
		ptTemp = poly.GetPointListAt(i)->AsAcGeVector3d();

		if(ptTemp.x - ptR.x > _DIST_SNAP)
		{
			ptR = ptTemp;
		}
		else if(fabs(ptR.x - ptTemp.x) < _DIST_SNAP)
		{
			if(ptTemp.y - ptR.y > _DIST_SNAP)
			{
				ptR = ptTemp;
			}
		}
	}
}

Acad::ErrorStatus TDbStruSlabHole::GetExtents2d( TADSGePoint3d &ptLow, TADSGePoint3d &ptUp ) const
{
	assertReadEnabled();
	m_polySection.GetExtend(ptLow, ptUp);
	ptLow.z = 0.0;
	ptUp.z = 0.0;
	return Acad::eOk;
}

Acad::ErrorStatus TDbStruSlabHole::GetExtents( TADSGePoint3d &ptLow, TADSGePoint3d &ptUp ) const
{
	assertReadEnabled();
	m_polySection.GetExtend(ptLow, ptUp);

	AcGePoint3d ptPos;
	GetAt(KEY_POS, ptPos);

	double dThick = 0.0;
	GetAt(KEY_THICK, dThick);
	ptUp.z = ptPos.z;
	ptLow.z = ptPos.z-dThick;
	return Acad::eOk;
}
 
bool TDbStruSlabHole::UnifyElevation( double dElevation )
{
	return true;
}

void TDbStruSlabHole::GetTips( TDPtrList<TObjInfoUnit> & ) const
{

}

const TCHAR * TDbStruSlabHole::GetDefaultLayer() const
{
	return LAY_S_OPNG_PLAN_LINE;
}

BOOL TDbStruSlabHole::IsValid() const
{
	assertReadEnabled();
	double dThick = 0.0;
	GetAt(KEY_THICK, dThick);
	if (!m_polySection.IsClosed() || m_polySection.Length() == 0 || dThick < _DIST_SNAP)
	{
		return FALSE;
	}
	return TRUE;
}

void TDbStruSlabHole::CopyPropertiesFrom( AcDbEntity *pSrcEntity, unsigned gMatchFlag )
{
	assertWriteEnabled();
	TDbStruEntityBase::CopyPropertiesFrom(pSrcEntity, gMatchFlag);
	TDbStruSlabHole *pHole = TDbStruSlabHole::cast(pSrcEntity);
	if (pHole != NULL)
	{
		CopyData(pHole);
	}
}

bool TDbStruSlabHole::GetStandardFaceBody( AcDbVoidPtrArray& arFacePtrs ) const
{
	return false;
}

bool TDbStruSlabHole::GetSafeProtectedSpace( AcDbVoidPtrArray& arFacePtrs ) const
{
	return false;
}

bool TDbStruSlabHole::GetSection( const AcDbFace &face, const AcGeVector3d& vtPlaneSecDir, std::vector<TObjSectionRecord> &sectionRecords, AcDbVoidPtrArray& arFillPtrs ) const
{
	return false;
}

CString TDbStruSlabHole::GetXml(const AcGeMatrix3d& mat) const
{
	TXmlTree xmlTree;
	POSITION posRoot = xmlTree.Insert(_T("ATS_STRUSLABHOLE"), NULL, NULL);
	{
		xmlTree.SetAttribute(posRoot, _T("name"), _T("板洞"));
		xmlTree.SetAttribute(posRoot, _T("comment"), _T("上华对象名称"));
	}

	CString strText;
	POSITION posItem1 = xmlTree.Insert(_T("Object_ID"), posRoot, NULL);
	{
		xmlTree.SetAttribute(posItem1, _T("name"), _T("对象编号"));
		xmlTree.SetAttribute(posItem1, _T("comment"), _T("当前对象的句柄"));
		strText.Format(_T("%ld"), objectId());
		xmlTree.SetItemText(posItem1, strText);
	}

	POSITION posItem = NULL;
	POSITION posItem2 = xmlTree.Insert(_T("Link_Slab"), posRoot, posItem1);
	{ 
		xmlTree.SetAttribute(posItem2, _T("name"), _T("连接楼板"));

		posItem = xmlTree.Insert(_T("Link_ID"), posItem2, NULL);
		{
			AcDbObjectId idSlab;
			GetAt(KEY_ASSOC, idSlab);
			xmlTree.SetAttribute(posItem, _T("name"), _T("楼板句柄"));
			strText.Format(_T("%ld"), idSlab);
			xmlTree.SetItemText(posItem, strText);
		}
	}

	POSITION posItem3 = xmlTree.Insert(_T("Position"), posRoot, posItem2);
	{ 
		xmlTree.SetAttribute(posItem3, _T("name"), _T("位置"));
		xmlTree.SetAttribute(posItem3, _T("comment"), _T("洞口位置"));
		AcGePoint3d ptPos;
		GetAt(KEY_POS, ptPos);

		TADSGePoint3d ptTransformBy = ptPos;
		ptTransformBy.TransformBy(mat);
		strText.Format(_T("%f,%f,%f"), ptTransformBy.x, ptTransformBy.y, ptTransformBy.z);
		xmlTree.SetItemText(posItem3, strText);
	}
	
	POSITION posItem4 = xmlTree.Insert(_T("Thick"), posRoot, posItem3);
	{ 
		xmlTree.SetAttribute(posItem4, _T("name"), _T("洞厚"));
		xmlTree.SetAttribute(posItem4, _T("comment"), _T("洞口厚度随板"));
		double dThick=0;
		GetAt(KEY_THICK, dThick);
		strText.Format(_T("%f"), dThick);
		xmlTree.SetItemText(posItem4, strText);
	}
	POSITION posItem5 = xmlTree.Insert(_T("Normal"), posRoot, posItem4);
	{ 
		xmlTree.SetAttribute(posItem5, _T("name"), _T("洞口法向"));
		xmlTree.SetAttribute(posItem5, _T("comment"), _T("洞口法向"));
		AcGeVector3d vtNorm;
		GetAt(KEY_NORMAL, vtNorm);

		TADSGePoint3d ptTransformBy = vtNorm;
		ptTransformBy.TransformBy(mat);
		strText.Format(_T("%f,%f,%f"), ptTransformBy.x, ptTransformBy.y, ptTransformBy.z);
		xmlTree.SetItemText(posItem5, strText);
	}
	POSITION posItem7 = xmlTree.Insert(_T("Baseline"), posRoot, posItem5);
	{ 
		xmlTree.SetAttribute(posItem7, _T("name"), _T("基线参数"));
		xmlTree.SetAttribute(posItem7, _T("comment"), _T("用于用于洞口形状"));
		
		posItem = NULL;
		CString strTab,strKeyVal;
		TADSGePoint3d pt;
		for (int i = 0; i < m_polySection.Length(); i++)
		{
			pt = m_polySection[i];
			pt.TransformBy(mat);

			strTab.Format(_T("Point_%d"), i + 1);
			posItem = xmlTree.Insert(strTab, posItem7, posItem);
			{
				strKeyVal.Format(_T("第%d点"), i + 1);
				xmlTree.SetAttribute(posItem, _T("name"), strKeyVal);
				strText.Format(_T("%f,%f,%f"), pt.x, pt.y, pt.z);
				xmlTree.SetItemText(posItem, strText);
			}

			strTab.Format(_T("Ang_%d"), i + 1);
			posItem = xmlTree.Insert(strTab, posItem7, posItem);
			{
				strKeyVal.Format(_T("圆心角%d"), i + 1);
				xmlTree.SetAttribute(posItem, _T("name"), strKeyVal);
				strText.Format(_T("%f"), m_polySection.GetBulge(i));
				xmlTree.SetItemText(posItem, strText);
			}
		}
	}

	CString strBase = TEntityBase::GetXml(mat);
	CString strXml = xmlTree.GetXml();
	int nIndex = strXml.Find(_T("<Object_ID"));
	strXml.Insert(nIndex, strBase);

	return strXml;
}

void TDbStruSlabHole::PostAssocMsg( TAssocMsg assocMsg ) const
{

}

void TDbStruSlabHole::ReceiveAssocMsg( TAssocMsg assocMsg )
{

}

void TDbStruSlabHole::MakeAssocRelation( AcDbObject& ids )
{
	assertWriteEnabled();
	AcDbObjectId idAssoc = ids.objectId();
	SetAt(KEY_ASSOC, idAssoc);
}

void TDbStruSlabHole::MakeAssocRelation(AcDbObjectIdArray& ids )
{
	assertWriteEnabled();

	if (ids.length() < 1)
	{
		return;
	}

	TPickEntSet ss(SS_FREE);
	ads_name eName;		 
	for (int i = 0; i < ids.length(); i++)
	{
		if (acdbGetAdsName(eName, ids[i]) == Acad::eOk)
		{
			ss += ids[i];
		}
	}

	TGGePoly2D poly;						//板洞平面线
	GetOutline(poly);
	poly.SetElevation(0);

	double dGap(0);
	TEntitySet ent;
	for (long j = 0; j < ss.Length(); j++)
	{
		ent = ss[j];
		if (ent.Is(_T("ATS_STRU_FLOORSLAB")))//板
		{
			OPENOBJ_BEGIN(ent, AcDb::kForRead, TDbStruFloorSlab, pEnt);
			if (!pEnt)
			{
				continue;
			}

			TGGePoly2D polyDest;			//板平面线
			pEnt->GetOutline(polyDest);
			polyDest.SetElevation(0);

			bool bRet = TBaseWallIntegrateTool::GetMinGap(poly, polyDest, dGap);
			if(bRet && dGap < _DIST_SNAP)
			{				
				SetAt(KEY_ASSOC, pEnt->objectId());
			}
			else
			{
				continue;
			}
			OPENOBJ_END();				
		}
	}
}

void TDbStruSlabHole::RemoveAssocRelation( AcDbObjectId& id )
{
	assertWriteEnabled();
	AcDbObjectId idAssoc;
	GetAt(KEY_ASSOC, idAssoc);
	if (id == idAssoc)
	{
		SetAt(KEY_ASSOC, AcDbObjectId::kNull);
	}
}

void TDbStruSlabHole::GetAssocRelation( AcDbObjectId& idAssoc ) const
{
	assertReadEnabled();
	GetAt(KEY_ASSOC, idAssoc);
}

// 获取关联关系，nType:关联类型；ar:关联对象句柄数组
void TDbStruSlabHole::GetAssocRelation(int nType, AcDbObjectIdArray& ar)const
{
	assertReadEnabled();
	ar.setLogicalLength(0);

	switch (nType)
	{
	case ASSOC_SLAB:
	case ASSOC_ALL:
		{
			AcDbObjectId idAssoc;
			GetAt(KEY_ASSOC, idAssoc);
			ar.append(idAssoc);
		}
		break;		
	default:
		break;
	}
}

TADSGePoint3d TDbStruSlabHole::GetParameters() const
{
	assertReadEnabled();
	TADSGePoint3d ptLow, ptUp;
	GetExtents2d(ptLow, ptUp);
	TADSGePoint3d pt;
	pt.x = fabs(ptLow.x - ptUp.x);
	pt.y = fabs(ptLow.y - ptUp.y);
	pt.z = 0.0;
	return pt;
}

void TDbStruSlabHole::GetOutline( TGGePoly2D &poly ) const
{
	assertReadEnabled();
	poly = m_polySection;
}

const TGGePoly2D& TDbStruSlabHole::GetOutlinePoly() const
{
	return m_polySection;
}

void TDbStruSlabHole::SetOutlinePoly( const TGGePoly2D &poly )
{
	m_polySection = poly;
	if (m_polySection.PathArea() > 0) // 顺时针时调整为逆时针
	{
		m_polySection.Reverse();
	}
}

double TDbStruSlabHole::GetBottomElev() const
{
	assertReadEnabled();
	AcGePoint3d ptLoc;
	GetAt(KEY_POS, ptLoc);
	return ptLoc.z;
}

void TDbStruSlabHole::SetBottomElev( double dElev )
{
	assertWriteEnabled();
	AcGePoint3d ptLoc;
	GetAt(KEY_POS, ptLoc);
	ptLoc.z = dElev;
	SetAt(KEY_POS, ptLoc);
}

void TDbStruSlabHole::CopyData(TDbStruSlabHole *pHole)
{
	if (pHole == NULL)
	{
		return;
	}

	AcGeVector3d vtNorm;
	GetAt(KEY_NORMAL, vtNorm);
	double dThick = 0.0;
	GetAt(KEY_THICK, dThick);
	AcDbObjectId idAssoc;
	GetAt(KEY_ASSOC, idAssoc);
	AcGePoint3dArray ptArr;
	GetAt(KEY_ZXPTS, ptArr);
	AcGePoint3d ptLoc;
	GetAt(KEY_POS, ptLoc);
	int nType = -1;
	GetAt(KEY_SECTYP, nType);
	double dWidth = 0.0, dHeight = 0.0;
	GetAt(KEY_SUMB, dWidth);
	GetAt(KEY_SUMH, dHeight);
	switch(nType)
	{
	case ST_RECT:
		{
			double dB = 0.0, dH = 0.0;
			GetAt(KEY_B, dB);
			GetAt(KEY_H, dH);
			GetSpecialtyData()->Empty();
			*GetSpecialtyData() = *pHole->GetSpecialtyData();
			SetAt(KEY_B, dB);
			SetAt(KEY_H, dH);
			break;
		}
	case ST_CIRCLE:
		{
			double dB = 0.0;
			GetAt(KEY_B, dB);
			GetSpecialtyData()->Empty();
			*GetSpecialtyData() = *pHole->GetSpecialtyData();
			SetAt(KEY_B, dB);
			break;
		}
	}

	SetAt(KEY_NORMAL, vtNorm);
	SetAt(KEY_THICK, dThick);
	SetAt(KEY_ASSOC, idAssoc);
	SetAt(KEY_ZXPTS, ptArr);
	SetAt(KEY_POS, ptLoc);
	SetAt(KEY_SECTYP, nType);
	SetAt(KEY_SUMB, dWidth);
	SetAt(KEY_SUMH, dHeight);
}

Acad::ErrorStatus TDbStruSlabHole::DrawZX(TGGiExplodeDrawBase &dc) const
{
	int nShape = -1;
	GetAt(KEY_SSHAPE, nShape);
	TGGePoly2D poly, polyHatch;
	switch(nShape)
	{
	case ST_RECT:
		{
			double dWidth = 0.0, dHeight = 0.0;
			GetAt(KEY_B, dWidth);
			GetAt(KEY_H, dHeight);
			AcGePoint3d ptLoc;
			GetAt(KEY_POS, ptLoc);
			ptLoc.z = 0.0;
			double dAngle = 0.0;
			GetAt(KEY_AXANG, dAngle);
			AcGeVector3d vtX = AcGeVector3d::kXAxis;
			vtX.rotateBy(dAngle, AcGeVector3d::kZAxis);
			AcGeVector3d vtY = vtX;
			vtY.rotateBy(PI / 2, AcGeVector3d::kZAxis);
			TADSGePoint3d ptTemp;
			ptTemp = ptLoc - vtX * dWidth * 0.5 - vtY * dHeight * 0.5;
			poly.AppendNode(ptTemp);
			ptTemp = ptLoc - vtX * dWidth * 0.25 + vtY * dHeight * 0.25;
			poly.AppendNode(ptTemp);
			ptTemp = ptLoc + vtX * dWidth * 0.5 + vtY * dHeight * 0.5;
			poly.AppendNode(ptTemp);
			
			if (DocGetIsSolidFill())
			{
				ptTemp = ptLoc + vtX * dWidth * 0.5 + vtY * dHeight * 0.5;
				polyHatch.AppendNode(ptTemp);
				ptTemp = ptLoc - vtX * dWidth * 0.5 + vtY * dHeight * 0.5;
				polyHatch.AppendNode(ptTemp);
				ptTemp = ptLoc - vtX * dWidth * 0.5 - vtY * dHeight * 0.5;
				polyHatch.AppendNode(ptTemp);
				ptTemp = ptLoc - vtX * dWidth * 0.25 + vtY * dHeight * 0.25;
				polyHatch.AppendNode(ptTemp);
				polyHatch.SetClosed();
			}
			break;
		}
	case ST_CIRCLE:
		{
			double dDiameter = 0.0;
			GetAt(KEY_B, dDiameter);;
			AcGePoint3d ptLoc;
			GetAt(KEY_POS, ptLoc);
			ptLoc.z = 0.0;
			double dAngle = 0.0;
			GetAt(KEY_AXANG, dAngle);
			AcGeVector3d vtX = AcGeVector3d::kXAxis;
			vtX.rotateBy(dAngle, AcGeVector3d::kZAxis);
			AcGeVector3d vtY = vtX;
			vtY.rotateBy(PI / 2, AcGeVector3d::kZAxis);
			TADSGePoint3d pt1, pt2, pt3;
			pt1 = ptLoc - vtX * dDiameter * 0.5;
			pt2 = ptLoc - vtX * dDiameter * 0.25 + vtY * dDiameter * 0.25;
			pt3 = ptLoc + vtX * dDiameter * 0.5;
			TGGeArc arc(pt1, pt2, pt3);
			arc.GetStartPoint(pt1);
			arc.GetEndPoint(pt2);
			poly.AppendNode(pt1, arc.Bulge());
			poly.AppendNode(pt2);	
			if (DocGetIsSolidFill())
			{
				pt1 = ptLoc + vtX * dDiameter * 0.5;
				polyHatch.AppendNode(pt1, PI);
				pt1 = ptLoc - vtX * dDiameter * 0.5;
				polyHatch.AppendNode(pt1, arc.Bulge() * (-1));
				pt1 = ptLoc + vtX * dDiameter * 0.5;
				polyHatch.AppendNode(pt1);
				polyHatch.SetClosed();
				TGGePoly2D polyDest;
				polyHatch.Disperse(polyDest);
				polyHatch.Reset();
				polyHatch = polyDest;
			}
			break;
		}
	case ST_POLY:
		{
			break;
		}
	default:
		{
			return Acad::eOk;
		}
	}

	// 填充
	if (DocGetIsSolidFill() && DocGetSlabHoleHatch())
	{
		CString sHatchType = DocGetSlabHoleHPatte();
		if (_tcsicmp(sHatchType, _T("SOLID")) == 0) 
		{
			dc << TGGeSolid(polyHatch);
		}
		else
		{
			dc << TGGeHatch(polyHatch, sHatchType, GetPScale());
		}
	}

	// 绘线
	dc << poly;
	return Acad::eOk;
}

// 显示板洞尺寸
void TDbStruSlabHole::DrawBH(TGGiExplodeDrawBase &dc) const
{
	TDbText text;

	// 得到文字样式ID
	AcDbObjectId idSlabHoleStyl = DocGetSlabHoleBHStyle();
	if(idSlabHoleStyl.isNull())
	{
		idSlabHoleStyl = InitTextStyle(TS_STANDARD);
	}
	text.SetStyleId(idSlabHoleStyl);		// 设置文字样式

	text.SetHeight(DocGetSlabHoleBHHigh());	// 设置文字高度

	text.setColorIndex(DocGetSlabHoleBHColor());// 设置文字颜色

	text.SetAlignment(XExplodeDraw::kTopCenter);// 设置文字对齐方式

//	TADSGePoint3d ptLow, ptUp;
//	GetExtents2d(ptLow, ptUp);				// 获得轮廓的最高点和最底点

	// 求外围轮廓的宽和高
	double dHeight(0), dWidth(0);
//	dHeight = fabs(ptUp.y - ptLow.y);		// 得到板洞的高度
//	dWidth = fabs(ptUp.x - ptLow.x);			// 得到板洞的宽度
	

	CString strHeight, strWidth;

	// modify by wjx on 120105 修改尺寸文字位置和内容
	CString strText;
	//strText.Format(_T("%s×%s"), strWidth, strHeight);
	//text.SetText(strText);					// 设置文字显示内容

	TGGePoly2D poly = GetOutlinePoly();	// 得到楼板的轮廓线
	XPoint ptInsert;
	double dDis = 0.0;

	int nShape;
	GetAt(KEY_SECTYP, nShape);				// 得到板洞类型
	
	if(nShape == ST_CIRCLE)					// 圆形板洞
	{
		GetAt(KEY_B, dWidth);
		strWidth = Dist2Str(dWidth);

		//dHoleWidth = dHeight;
		//ptInsert.y -= (dHoleWidth/2 + DocGetSlabHoleBHDist() * GetPScale());
		strText.Format(_T("洞Φ%s"), strWidth);
		AcGePoint3d ptIns;
		GetAt(KEY_POS, ptIns);				// 得到板洞的插入位置
		ptInsert = XPoint(ptIns);
	}
	else									// 矩形板洞和任意形板洞
	{
		//TGGePoly2D poly = GetOutlinePoly();	// 得到楼板的轮廓线
		//XCurveSegment seg;
		//poly.Nth(0, seg);

		//XPoint ptStart = seg.GetStartPoint();
		//XPoint ptEnd = seg.GetEndPoint();

		//double angle = ads_angle(ptStart, ptEnd);// 得到柱子的旋转角度

		//if(angle - PI > g_angleZero)					// 180-360度时的处理
		//{
		//	angle -= PI;
		//}

		//if(angle - PI/2 <= g_angleZero)				// 0-90度时得到文字需要移动的距离
		//{
		//	dHoleWidth = dHeight;
		//}
		//else									// 90-180
		//{
		//	dHoleWidth = dWidth;
		//}

		//// 将文字的旋转角度设置成0-90度之间的角度
		//while(angle - PI/2 > g_angleZero)
		//{
		//	angle -= (PI/2);
		//}

		//text.SetRotation(angle);					// 设置文字的旋转角度

		//dDis = dHoleWidth/2 + DocGetSlabHoleBHDist() * GetPScale();
		//ptInsert = XPoint(ptInsert, angle+PI/2, -dDis);// 得到插入点(在垂直方向移动dDis距离后的点)
		if (nShape == ST_RECT)
		{
			GetAt(KEY_B, dWidth);
			GetAt(KEY_H, dHeight);
		}
		else
		{
			TADSGePoint3d ptLow, ptUp;
			GetExtents2d(ptLow, ptUp);				// 获得轮廓的最高点和最底点

			// 求外围轮廓的宽和高			
			dHeight = fabs(ptUp.y - ptLow.y);		// 得到板洞的高度
			dWidth = fabs(ptUp.x - ptLow.x);		// 得到板洞的宽度
		}
		strWidth = Dist2Str(dWidth);
		strHeight = Dist2Str(dHeight);

		poly.Center(ptInsert);
 		strText.Format(_T("洞%s×%s"), strWidth, strHeight);
	}
	text.SetText(strText);					// 设置文字显示内容
	text.SetAlignment(XExplodeDraw::kCenter);// 设置文字对齐方式

	// 设置斜线部分的起始点和终止点
	int nColor = dc.GetColor();
	int nLineColor = 3;
	dc.SetColor(nLineColor);

	double dLineLen = 200;
	TADSGePoint3d ptEnd(ptInsert.x + dWidth/2 + dLineLen, ptInsert.y + dHeight/2 + dLineLen, ptInsert.z);
	TADSGePoint3d ptStart(ptInsert);

	TGGeCurveSegment seg(ptStart, ptEnd, 0);

	TGGeLine line(seg);
	dc.DrawLine(line);

	double dTextWidth = dLineLen, dTextHeight = 0;
	text.GetExtents(&dTextWidth, &dTextHeight);					// 得到文字的宽和高

	ptInsert = AcGePoint3d(ptEnd.x + dTextWidth/2, ptEnd.y, 0);	// 计算文字的插入点
	text.SetLocation(ptInsert);				// 设置文字的插入位置

	ptStart = TADSGePoint3d(ptEnd);
	ptEnd.x += dTextWidth * 1.2;									// *1.2是因为文字下方的线要比文字的宽度长一些

	seg = TGGeCurveSegment(ptStart, ptEnd, 0);

	line = TGGeLine(seg);
	dc.DrawLine(line);

	dc.SetColor(nColor);

	text.ExplodeOrDraw2d(dc);
}
int TDbStruSlabHole::GetFirstVersion()const
{
	return 10;
}
bool TDbStruSlabHole::IsModelEntity() const
{
	return true;
}
void InitStruSlabHole(bool bTrue)
{
	if (bTrue)
	{
		TDbStruSlabHole::rxInit();
		acrxBuildClassHierarchy();
		TDbStruSlabHole::InitMatchProtocol(TRUE);
	} 
	else
	{
		TDbStruSlabHole::InitMatchProtocol(FALSE);
		deleteAcRxClass(TDbStruSlabHole::desc());
	}
}
#endif