envi-code/SourceCode/Code2026/inc/implement/AecDbXEquipment.h

#pragma once

/*----------------------------------------------------------------------------------
//AecDbXEquipment ： 参数化设备
//
//
//---------------------------------------------------------------------------------*/

#include "AecDbObjXDataMap.h"
#include "AecDbBDPipeBase.h"
#include "define_class_xdata_key.h"
#include "AecMInterfaces.h"
#include "EarThwormDef.h"

#ifdef EARTHWORM_EXPORT
#define DLLIMPEXP __declspec(dllexport)
#else
#define DLLIMPEXP __declspec(dllimport)
#endif

class XEquipmentImplBase;
class DLLIMPEXP AecDbXEquipment: public AecDbBDPipeBase
{
public:
	ACRX_DECLARE_MEMBERS(AecDbXEquipment);

	// 为罐体上的管嘴
public:
	struct TANK_NOZZ
	{
		int nType;				// 0 圆形 1方形
		double dX;				// 俯视X长度
		double dY;				// 俯视Y长度
		double dH;				// 管嘴高度
		double dAngle;			// 管嘴方向(与XOY面)
		double dDNX;			// 管公称直径,方管时为长
		double dDNY;			// 方管时为高,其它情况无效
		double dFlDN;			// 法兰公称直径
		double dFlT;			// 法兰厚度
		int nRectDir;		// 方形罐体管嘴的方向
		TCHAR pszName[512];		// 管嘴名称
	};

public:
	// 格栅
	DECLARE_ENUM(GESHAN)
	XHG_I = 0,
	XHG_II,
	SG,
	BLQ,
	ZG_I,
	ZG_II,
	XGC,
	XJT,
	ZSB,
	BS,
	XL,
	END_ENUM()
	
	// 爆气器
	DECLARE_ENUM(BAOQIQI)
	PAN_SI = GESHAN::XL + 1,
	GUAN_SI,
	END_ENUM()

	// 水槽
	DECLARE_ENUM(FLUME)
	PARSHALL = BAOQIQI::GUAN_SI + 1,
	END_ENUM()

	// 堰
	DECLARE_ENUM(WEIR)
	SANJIAOYAN = FLUME::PARSHALL + 1,
	CULIUKONGYAN,
	BAOBIYAN,
	END_ENUM()

	// 沉沙池-砂水分离
	DECLARE_ENUM(SHASHUIFENLI)
	XCS = WEIR::BAOBIYAN + 1,
	HXS,
	LCS,
	END_ENUM()

	// 螺旋泵
	DECLARE_ENUM(LUOXUANBENG)
	LXB = SHASHUIFENLI::LCS + 1,
	END_ENUM()

	// 闸门
	DECLARE_ENUM(ZHAMEN)
	RECT_ZHAMEN = LUOXUANBENG::LXB + 1,
	CIRCLE_ZHAMEN,
	SHENG_NI_FA,
	END_ENUM()

	// 刮泥机
	DECLARE_ENUM(GUANIJI)
	XZG = ZHAMEN::SHENG_NI_FA + 1,
	CZG,
	ZG,
	QG,
	PJ,
	SX,
	SB,
	LIANTIAO,
	END_ENUM()

	// 浓缩机
	DECLARE_ENUM(NONGSUOJI)
	NC = GUANIJI::LIANTIAO + 1,
	NB,
	END_ENUM()

	// 爆气机
	DECLARE_ENUM(BAOQIJI)
	YHG = NONGSUOJI::NB + 1,
	AD,
	END_ENUM()

	// 加药混合
	DECLARE_ENUM(JIAYAOHUNHE)
	GJ = BAOQIJI::AD + 1,
	PJ,
	TJ,
	LJF,
	END_ENUM()

	// 滤布机
	DECLARE_ENUM(LVBUJI)
	ZHUANPAN = JIAYAOHUNHE::LJF + 1,
	END_ENUM()

	// 启闭机
	DECLARE_ENUM(QIBIJI)
	QS_I_P = LVBUJI::ZHUANPAN + 1,
	QS_I_Y,
	QS_I_L,
	QS_II_L,
	QS_II_Y,
	END_ENUM()

	// 斜板管
	DECLARE_ENUM(XIEBANGUAN)
	XBG = QIBIJI::QS_II_Y + 1,
	END_ENUM()

	// 罐箱
	DECLARE_ENUM(GUANXIANG)
	GUANXIANG_I = XIEBANGUAN::XBG + 1,
	END_ENUM()

	// 管道过滤器
	DECLARE_ENUM(GUANDAOGUOLVQI)
	DLD_FZ = GUANXIANG::GUANXIANG_I + 1,
	END_ENUM()

	// 浅层砂率
	DECLARE_ENUM(QIANCENGSHALV)
	DMF_56 = GUANDAOGUOLVQI::DLD_FZ + 1,
	END_ENUM()

	// 一般罐体
	DECLARE_ENUM(YIBANGUANTI)
	YUANXINGGUAN = QIANCENGSHALV::DMF_56 + 1,
	END_ENUM()
	DECLARE_ENUM(YIBANXIANGTI)
	FANGXINGXIANG = YIBANGUANTI::YUANXINGGUAN + 1,
	END_ENUM()

	DECLARE_ENUM(LABAKOU)
	YUANXINGLABAKOU = YIBANXIANGTI::FANGXINGXIANG + 1,
	END_ENUM()

	DECLARE_ENUM(CHANSHUDIBAN)
	YUANXINGDIBAN = LABAKOU::YUANXINGLABAKOU + 1,
	END_ENUM()

protected:
	static Adesk::UInt32 kCurrentVersionNumber;

public:
	AecDbXEquipment(const int &type);
	AecDbXEquipment(): m_pImpl(NULL) {}
	~AecDbXEquipment(void);

	void SetType(int nType);
	int  GetType() const;

	virtual Acad::ErrorStatus	dwgInFields(AcDbDwgFiler* pFiler);
	virtual Acad::ErrorStatus	dwgOutFields(AcDbDwgFiler* pFiler) const;
	virtual Acad::ErrorStatus	dxfInFields(AcDbDxfFiler* pFiler);
	virtual Acad::ErrorStatus	dxfOutFields(AcDbDxfFiler* pFiler) const;

	virtual void				subList() const;

	virtual Acad::ErrorStatus   copyFrom(const AcRxObject* pSrc);
	Acad::ErrorStatus   copyFrom2(const AcRxObject* pSrc);

	virtual Acad::ErrorStatus   subTransformBy(const AcGeMatrix3d& xform);

	virtual Acad::ErrorStatus	subGetGripPoints(AcDbGripDataPtrArray& grips,
												 const double curViewUnitSize,
												 const int gripSize,
												 const AcGeVector3d& curViewDir,
												 const int bitflags) const;

	virtual Acad::ErrorStatus	subMoveGripPointsAt(const AcDbVoidPtrArray &appData, const AcGeVector3d &offset, const int bitflags);

	virtual Acad::ErrorStatus	subGetStretchPoints(AcGePoint3dArray& stretchPoints) const;
	virtual Acad::ErrorStatus	subMoveStretchPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset);

	virtual Acad::ErrorStatus	subGetOsnapPoints(  AcDb::OsnapMode     osnapMode,
													INT_PTR             gsSelectionMark,
													const AcGePoint3d&  pickPoint,
													const AcGePoint3d&  lastPoint,
													const AcGeMatrix3d& viewXform,
													AcGePoint3dArray&   snapPoints,
													AcDbIntArray&       geomIds) const;

	virtual Acad::ErrorStatus	subGetGeomExtents(AcDbExtents& extents) const;

	//AEC 派生
	virtual Acad::ErrorStatus	Draw2d(AcGiDraw &dc) const;
	virtual Acad::ErrorStatus	Draw3d(AcGiDraw &dc) const;

	virtual SHJson::WValue& ToJson(bool bExprotGeo = true) const;

	virtual bool ByJson(const SHJson::WValue &v);

	virtual bool GetBimInfoTip(CString& sInfoTip) const;

	virtual CString getUniqueName() const;

	virtual int GetDraw2dables(Adesk::UInt16 nDrawStyle, AcDbVoidPtrArray& arEntPtrs) const;

	virtual void ProcessHlrResult(const AcArray<AcDbEntity *> &ar
		, const std::map<AcDbEntity *, AcArray<AcDbEntity *>> &preAr
		, AcArray<AcDbEntity *> &output) const;

	//接口
	MINTERFACES_METHODS

public:
	virtual const AecDbObjXDataMap* GetSpecialtyData() const;
	virtual AecDbObjXDataMap* GetSpecialtyData(AcDb::OpenMode bMode);

	virtual int GetSectionDraw(const AcGePoint3d& ptFr, const AcGePoint3d& ptTo, const AcGeVector3d& vtViewDir, const AcGeVector3d& vtTo, AcDbVoidPtrArray&  arRegPtrs) const;

	void draw3dByImp();

	static bool isType(AcDbObjectId &id, const int &type);
	static bool isType(AecDbXEquipment *pEqu, const int &type);

public:
	void clearInterface();
	void SetPosAndDir(const AcGePoint3d &pt, const AcGeVector3d &dir);
	void GetInsert(AcGePoint3d& ptIns, AcGeVector3d& vtDir) const;
	void SetElev(const double &dElev);
	double GetElev();
	bool GetSrcString(CString &src) const ;
	void SetSrcString(LPCTSTR src);
	XEquipmentImplBase* cloneImpl(AecDbObjXDataMap *pXData);

	XEquipmentImplBase* createParamEquImpl(const int &type, bool bRedraw);

	CString GetSpec();
	bool GetSpec(std::vector<std::pair<CString, CString>> &spec);
	bool GetJsonParams(std::vector<std::pair<CString, CString>> &spec);
	virtual bool GetProperties(SimpleProperty::PropertySetByIndex &porpertys) const;
	virtual bool SetProperties(SimpleProperty::PropertySetByName &porpertys);

private:
	XEquipmentImplBase *m_pImpl;

protected:
	AcArray<AecInterface> m_interfaces;
};