envi-code/SourceCode/Code2026/PipelineCmd/PipeMajDlg.cpp

#include "stdafx.h"
#include "PipeMajDlg.h"
#include "KTModelLayoutXData.h"
#include "coretools.h"
#include "PipelineTools.h"

#ifndef _BYGB_
#define _BYGB_ _T("按执行标准")
#endif
extern double g_minRadio;

IMPLEMENT_DYNAMIC(CPipeMajDlg, CDialog)

CPipeMajDlg::CPipeMajDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CPipeMajDlg::IDD, pParent)
	, m_sMertialFit(_T("碳钢"))
	, m_sMertial(_T("碳钢"))
{
	m_pDb = NULL;
	m_nDN = 100;
	m_dOD = 107;
	m_dt = 3.5;
	m_dPress = 1.0;
	m_sPress = _T("1.6A");
	m_bPressureSel = TRUE;
	m_bUpdateMat = FALSE;
	m_nColorIndex = 256;
	m_nOnlyDN = 0;
	m_nRadioOn = 1;
}

CPipeMajDlg::~CPipeMajDlg()
{

}

void CPipeMajDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Control(pDX, IDC_PIPELIST, m_wndPipeList);
	DDX_Control(pDX, IDC_LISTELBOWRAD, m_wndElbowradList);
	DDX_Control(pDX, IDC_LIST1, m_wndPressList);
	DDX_Control(pDX, IDC_LIST2, m_wndPressList2);
	DDX_Control(pDX, IDC_COMBO_SYS, m_wndComboPipeSys);
	DDX_Text(pDX,IDC_EDIT1,m_nDN);
	DDX_Text(pDX,IDC_EDIT2,m_dOD);
	DDX_Text(pDX,IDC_EDIT3,m_dt);
	DDX_Text(pDX,IDC_EDIT4,m_sPress);
	DDX_Text(pDX,IDC_EDIT5,m_dRatio);
	DDX_Radio(pDX, IDC_RADIO6, m_nRadioOn);
	DDX_Text(pDX,IDC_EDIT6,m_dPress);
	DDX_Check(pDX,IDC_CHECK1,m_bPressureSel);
	DDX_Check(pDX,IDC_CHECK2,m_bUpdateMat);

	DDX_CBString(pDX, IDC_COMBOMATERS, m_sMertial);
	DDX_Control(pDX, IDC_COMBOMATERS, m_wndComboMaters);
	DDX_Control(pDX, IDC_COMBOMATERSFIT, m_wndComboMatersFit);
	DDX_CBString(pDX, IDC_COMBOMATERSFIT, m_sMertialFit);
	DDX_CBString(pDX, IDC_COMBO_SYS, m_sPipeSys);
}

BEGIN_MESSAGE_MAP(CPipeMajDlg, CDialog)
	ON_BN_CLICKED(IDC_CHECK1,&CPipeMajDlg::OnCheckPressSwitch)
	ON_BN_CLICKED(IDC_CHECK2,&CPipeMajDlg::OnCheckUpdateMat)
END_MESSAGE_MAP()

//UPVC CPVC PVC-C PP-H (PE) HDPE
bool CPipeMajDlg::IsPlasticsMat(int nPos, CString &sODNo)
{
	const CString sPlastic = _T("UPVC CPVC PVC-C PP-H (PE) PE100 HDPE");

	CStringArray arTxts;
	CoreTools::SplitStrintToArray(sPlastic, arTxts, _T(' '));

	for (int i = 0; i < arTxts.GetSize(); i++)
	{
		if (nPos == 0)
		{
			if (m_sMertial.Find(arTxts.GetAt(i)) != -1)
			{
				sODNo = arTxts.GetAt(i);

				//以下 PVC-C  PP-H  PE100 的国标数据 替代 PVC
				if (sODNo.CompareNoCase(_T("PVC-C")) == 0)
					sODNo = _T("CPVC");

				if (sODNo.Find(_T("(PE)")) == 0)
					sODNo = _T("PE");

				if (sODNo.CompareNoCase(_T("PE100")) == 0)
					sODNo = _T("PE");

				if (sODNo.CompareNoCase(_T("(PE100)")) == 0)
					sODNo = _T("PE");

				return true;
			}

		}
		else
		{
			if (m_sMertialFit.Find(arTxts.GetAt(i)) != -1)
			{
				sODNo = arTxts.GetAt(i);
				return true;
			}
		}
	}
	return false;
}

BOOL CPipeMajDlg::IsGSFMaterial(CString &sODNo)
{
	//目前只能按照材质判断
	if (m_sMertial.Find(_T("衬塑")) != -1 ||
		m_sMertial.Find(_T("HG/T 20538")) != -1)
	{
		sODNo = _T("GSF");
		return TRUE;
	}
	return FALSE;
}

BOOL CPipeMajDlg::IsRCPMaterial(CString &sODNo)
{
	//目前只能按照材质判断
	if (m_sMertial.Find(_T("混凝土")) != -1)
	{
		sODNo = _T("RCP");
		return TRUE;
	}
	return FALSE;
}

BOOL CPipeMajDlg::OnInitDialog()
{
	CDialog::OnInitDialog();

	//4K
	int iWidth = GetSystemMetrics(SM_CXSCREEN);
	int iHeight = GetSystemMetrics(SM_CYSCREEN);
	int nAdd = 0;
	if (iWidth >= 3800 && iHeight >= 2400)//4K
	{
		nAdd = 45;
	}

	//LIST
	m_wndPipeList.SetExtendedStyle(LVS_EX_FULLROWSELECT);
	m_wndPipeList.InsertColumn(0, _T("DN"), LVCFMT_LEFT, 70 + nAdd);
	m_wndPipeList.InsertColumn(1, _T("外径"), LVCFMT_LEFT, 70 + nAdd);
	m_wndPipeList.InsertColumn(2, _T("壁厚"), LVCFMT_LEFT, 60 + nAdd);
	m_wndPipeList.InsertColumn(3, _T("重量"), LVCFMT_LEFT, 62 + nAdd);
	m_wndPipeList.InsertColumn(4, _T("表号"), LVCFMT_LEFT, 65 + nAdd);
	m_wndPipeList.InsertColumn(5, _T("外径系列"), LVCFMT_CENTER, 80 + nAdd);

	//EXT
	m_wndPipeList.InsertColumn(6, _T("执行标准"), LVCFMT_LEFT, 300 + nAdd);
	//m_wndPipeList.InsertColumn(7, _T("物料描述"), LVCFMT_LEFT, 0);
	//m_wndPipeList.InsertColumn(8, _T("规格型号"), LVCFMT_LEFT, 0);

	if (m_pDb != NULL)
	{
		
		CString sODNo = m_param.szODSn;
		//再次确认
		IsGSFMaterial(sODNo);

		IsPlasticsMat(0, sODNo);

		InitPipeList(50000, sODNo);

		InitPressFromDb();

		CStringArray arVals;
		PipelineTools::getPipeSysRecord(m_pDb, m_sPipeSys, arVals);
		if (arVals.GetSize() >= 5)
		{
			m_nColorIndex = _ttoi(arVals.GetAt(2));
		}
	}

	if (m_bPressureSel)
	{
		m_wndPressList2.ShowWindow(SW_SHOW);
		m_wndPressList.ShowWindow(SW_HIDE);
	}
	else
	{
		m_wndPressList2.ShowWindow(SW_HIDE);
		m_wndPressList.ShowWindow(SW_SHOW);
	}

	m_wndComboMatersFit.EnableWindow(m_bUpdateMat);
	m_wndComboMaters.EnableWindow(m_bUpdateMat);
	m_wndComboPipeSys.EnableWindow(m_bUpdateMat);

		
	UpdateData(FALSE);

	return TRUE;
}

void CPipeMajDlg::OnOK()
{
	UpdateData();

	POSITION ps = m_wndPipeList.GetFirstSelectedItemPosition();
	if (ps != NULL)
	{
		int nItem = m_wndPipeList.GetNextSelectedItem(ps);
		if (nItem != -1)
		{
			m_param.m_dDN = _ttof(m_wndPipeList.GetItemText(nItem,0));
			m_param.m_dOD = _ttof(m_wndPipeList.GetItemText(nItem,1));
			m_param.m_dThick = _ttof(m_wndPipeList.GetItemText(nItem,2));
			_tcscpy(m_param.szODSn,m_wndPipeList.GetItemText(nItem, 5));
			_tcscpy(m_param.szStdNo, m_wndPipeList.GetItemText(nItem, 6));
		}
		else
		{
			AfxMessageBox(_T("请选择管线规格系列!"));
			return;
		}
	}

	CString sText,sSQL;
	int nSel = m_wndElbowradList.GetCurSel();
	if (nSel != -1)
	{
		//曲率
		m_wndElbowradList.GetText(nSel, sText);
		if (sText.CompareNoCase(_BYGB_) == 0)
		{
			m_param.m_nRadioOn = TRUE;//按国标结构长度
			m_param.m_dRRatio = g_minRadio;//最小

			//根据ODSN查询数据库 默认曲率
			sSQL.Format(_T("select distinct [弯头曲率] from [AecElbowData] where [外径系列]='%s' order by [弯头曲率]"), m_param.szODSn);
			CStringArray arRad;
			m_pDb->GetSelData(sSQL, arRad);
			if (arRad.GetSize() > 0)
			{
				m_param.m_dRRatio = _ttof(arRad.GetAt(0));
			}
		}
		else
		{
			m_param.m_dRRatio = _ttof(sText);
		}
	}

	//不可变换等级
	/*nSel = m_wndPressList.GetCurSel();
	if (nSel != -1)
	{
		sText = _T("");
		m_wndPressList.GetText(nSel,sText);
		_tcscpy(m_param.szLevel,(LPCTSTR)sText);
	}*/

	m_dPress = 1.0;
	nSel = m_wndPressList2.GetCurSel();
	if (nSel != -1)
	{
		sText = _T("");
		m_wndPressList2.GetText(nSel,sText);
		m_dPress = _ttof(sText);
	}
	
	if (m_param.m_nConnectType == 3)//法兰管
	{
		//查询法兰管的法兰数据
		QueryFlangOnPipe();
	}

	if (m_bUpdateMat)
	{
		CString sODNo = m_param.szODSn;
		CString sBk = m_sMertial;
		m_sMertial = m_param.szMertial;
		BOOL bIsPla1 = IsPlasticsMat(0, sODNo);
		BOOL bIsGasf1 = IsGSFMaterial(sODNo);
		BOOL bIsRcp1 = IsRCPMaterial(sODNo);

		m_sMertial = sBk;
		BOOL bIsPla2 = IsPlasticsMat(0,m_sMertial);
		BOOL bIsGasf2 = IsGSFMaterial(sODNo);
		BOOL bIsRcp2 = IsRCPMaterial(sODNo);

		//1.
		if (bIsPla1 && !bIsPla2)
		{
			if (sBk.CompareNoCase(m_param.szMertial) != 0)
			{
				AfxMessageBox(_T("不可以从塑料管切换成非塑料管!"));
				return;
			}
		}
		if (!bIsPla1 && bIsPla2)
		{
			if (sBk.CompareNoCase(m_param.szMertial) != 0)
			{
				AfxMessageBox(_T("不可以从非塑料管切换成塑料管!"));
				return;
			}
		}

		//2.
		if (bIsGasf1 && !bIsGasf2)
		{
			if (sBk.CompareNoCase(m_param.szMertial) != 0)
			{
				AfxMessageBox(_T("不可以从衬塑管切换成非衬塑管!"));
				return;
			}
		}
		if (!bIsGasf1 && bIsGasf2)
		{
			if (sBk.CompareNoCase(m_param.szMertial) != 0)
			{
				AfxMessageBox(_T("不可以从非衬塑管切换成衬塑管!"));
				return;
			}
		}

		//3.
		if (bIsRcp1 && !bIsGasf2)
		{
			if (sBk.CompareNoCase(m_param.szMertial) != 0)
			{
				AfxMessageBox(_T("不可以从水泥管切换成非水泥管!"));
				return;
			}
		}
		if (!bIsRcp1 && bIsGasf2)
		{
			if (sBk.CompareNoCase(m_param.szMertial) != 0)
			{
				AfxMessageBox(_T("不可以从非水泥管切换成水泥管!"));
				return;
			}
		}

		_tcscpy(m_param.szMertial,m_sMertial);
		_tcscpy(m_param.szMertialFit,m_sMertialFit);
		if (m_sPipeSys != _T("不修改管线系统"))
		{
			_tcscpy(m_param.szSys, m_sPipeSys);

			CStringArray arVals;
			PipelineTools::getPipeSysRecord(m_pDb, m_sPipeSys, arVals);
			if (arVals.GetSize() >= 5)
			{
				m_nColorIndex = _ttoi(arVals.GetAt(2));
			}
		}
	}

	EndDialog(IDOK);
}

void CPipeMajDlg::OnCheckPressSwitch()
{
	UpdateData();

	if (m_bPressureSel)
	{
		m_wndPressList2.ShowWindow(SW_SHOW);
		m_wndPressList.ShowWindow(SW_HIDE);
	}
	else
	{
		m_wndPressList2.ShowWindow(SW_HIDE);
		m_wndPressList.ShowWindow(SW_SHOW);
	}
}

void CPipeMajDlg::OnCheckUpdateMat()
{
	UpdateData();

	m_wndComboMaters.EnableWindow(m_bUpdateMat);
	m_wndComboMatersFit.EnableWindow(m_bUpdateMat);
	m_wndComboPipeSys.EnableWindow(m_bUpdateMat);
}

void CPipeMajDlg::QueryFlangOnPipe()
{
	double dWD, dWh, dd;
	if (CoreTools::QueryFlangData(m_pDb
		, m_param.m_dDN
		, m_dPress
		, dWD
		, dWh
		, dd
		, dd
		, CoreTools::GetCurrentProject()
		, m_param.szLevel))
	{
		m_param.m_dInterfaceL = dWh;
		m_param.m_dInterfaceD = dWD;
	}
}

void CPipeMajDlg::SetDbServer(CUIISQLiteServer* pDb)
{
	m_pDb = pDb;
}

void CPipeMajDlg::InitPipeList(int nMaxDN, CString sODNo)
{
	if (m_pDb != NULL)
	{
		m_wndPipeList.DeleteAllItems();

		//公称直径系列
		bool bMODSN = false;
		CString sSQL, sText, sODAWhere = _T("");
		if (sODNo.CompareNoCase(_T("A")) == 0 || sODNo.CompareNoCase(_T("B")) == 0 || sODNo.IsEmpty())
		{
			sODAWhere = _T("([外径系列]='A' or [外径系列]='B' or [外径系列]='S')");
			bMODSN = true;
		}
		else
		{
			sODAWhere.Format(_T("[外径系列]='%s'"), sODNo);
		}

		/*
		//公称直径系列
		CString sSQL, sText;
#ifdef HAITIAN
		if (m_nOnlyDN == 0)
		{
			sSQL = _T("select [公称直径],[外径],[壁厚],[重量],[执行标准],[物料描述],[规格型号] from AecOD order by [公称直径],[壁厚]");
		}
		else
		{
			sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[执行标准],[物料描述],[规格型号] from AecOD where [公称直径]=%d order by [公称直径],[壁厚]"), m_nOnlyDN);
		}
#else
		if (m_nOnlyDN == 0)
		{
			sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列] from AecOD where [公称直径]<%d and [外径系列]='%s' order by [公称直径],[壁厚],[表号]"), nMaxDN, sODNo);
		}
		else
		{
			sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列] from AecOD where [公称直径]=%d and [外径系列]='%s' order by [公称直径],[壁厚],[表号]"), m_nOnlyDN, sODNo);
		}
#endif
		CUIIValueTable table;
		m_pDb->GetSelData(sSQL, table);

		if (table.GetTableLogicSize() == 0)
		{
			//按外径选
			sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列] from AecOD where [外径]<=%d and [外径系列]='%s' order by [公称直径],[壁厚],[表号]"), m_nOnlyDN, sODNo);
			m_pDb->GetSelData(sSQL, table);
		}*/


		if (m_nOnlyDN == 0)
		{
			//sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列] from AecOD where [公称直径]<%d and %s order by [公称直径],[壁厚],[外径系列],[表号]"), nMaxDN, sODAWhere);
			if (bMODSN)
			{
				sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列],[标准] from AecOD where [公称直径]<=%d and %s order by [外径系列] desc"), nMaxDN, sODAWhere);
			}
			else
			{
				sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列],[标准] from AecOD where [公称直径]<=%d and %s order by [外径系列],[公称直径],[壁厚]"), nMaxDN, sODAWhere);
			}
		}
		else
		{
			//sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列] from AecOD where [公称直径]=%d and %s order by [公称直径],[壁厚],[外径系列],[表号]"), m_nOnlyDN, sODAWhere);
			sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列],[标准] from AecOD where [公称直径]=%d and %s order by [外径系列],[公称直径],[壁厚] desc"), m_nOnlyDN, sODAWhere);//
		}

		CUIIValueTable table;
		m_pDb->GetSelData(sSQL, table);

		if (table.GetTableLogicSize() == 0)
		{
			//按外径选
			//sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列] from AecOD where [外径]<=%d and %s order by [公称直径],[壁厚],[外径系列],[表号]"), m_nOnlyDN, sODAWhere);

			//按外径选
			int nDN = (m_nOnlyDN == 0) ? nMaxDN : m_nOnlyDN;

			if (bMODSN)
			{
				sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列],[标准] from AecOD where [外径]<=%d and %s order by [外径系列]"), nDN, sODAWhere);
			}
			else
			{
				sSQL.Format(_T("select [公称直径],[外径],[壁厚],[重量],[表号],[外径系列],[标准] from AecOD where [外径]<=%d and %s order by [外径系列],[公称直径],[壁厚]"), nDN, sODAWhere);
			}
			m_pDb->GetSelData(sSQL, table);
		}

		table.ShowToListCtrl(&m_wndPipeList);

		CString sDnold, sThick,sODNo2;
		sDnold.Format(_T("%d"), m_nDN);

		int iStart = -1;
		bool bFind = false;
		for (int i = 0; i < m_wndPipeList.GetItemCount(); i++)
		{
			sText = m_wndPipeList.GetItemText(i, 0);
			sThick = m_wndPipeList.GetItemText(i, 2);
			sODNo2 = m_wndPipeList.GetItemText(i, 5);

			if (sText.CompareNoCase(sDnold) == 0 && iStart == -1)
				iStart = i;

			if (sText.CompareNoCase(sDnold) == 0 && fabs(_ttof(sThick) - m_dt) < 1.e-6 && sODNo2.CompareNoCase(sODNo) == 0)
			{
				iStart = i;
				m_wndPipeList.SetItemState(i, LVIS_SELECTED, LVIS_SELECTED);
				m_wndPipeList.EnsureVisible(i, TRUE);
				bFind = true;
				break;
			}
		}

		if (!bFind)
		{
			if (iStart == -1) iStart = 0;

			if (m_wndPipeList.GetItemCount() > 0)
				m_wndPipeList.SetItemState(iStart, LVIS_SELECTED, LVIS_SELECTED);
			m_wndPipeList.EnsureVisible(iStart, TRUE);
		}
	
		//曲率半径
		//sSQL = _T("select [曲率半径] from AecElbowradius order by [曲率半径]");
		sSQL.Format(_T("select distinct [弯头曲率] from AecElbowData where %s order by [弯头曲率]"), sODAWhere);

		int nSel = 0;
		CString sRat;
		CStringArray arVals;
		arVals.Add(_BYGB_);
		m_pDb->GetSelData(sSQL,arVals);
		for ( i = 0;i < arVals.GetSize();i++)
		{
			m_wndElbowradList.InsertString(i,arVals.GetAt(i));
			sRat = arVals.GetAt(i);
			if ( fabs(_ttof(sRat) - m_param.m_dRRatio) < 1.e-6)
			{
				nSel = i;
				if ((m_param.m_dRRatio - g_minRadio) < 1.e-3)
					nSel = 0;
			}
		}
		m_wndElbowradList.SetCurSel(nSel);

		//材质
		arVals.RemoveAll();
		sSQL = _T("select [材质] from AecMaterial where [类型]='管道'");
		m_pDb->GetSelData(sSQL,arVals);

		for (i = 0;i < arVals.GetSize();i++)
		{
			m_wndComboMaters.InsertString(i,arVals.GetAt(i));

			if (m_sMertial.CompareNoCase(arVals.GetAt(i)) == 0)
			{
				m_wndComboMaters.SetCurSel(i);
			}
		}

		//材质
		arVals.RemoveAll();
		sSQL = _T("select [材质] from AecMaterial where [类型]='管件'");
		m_pDb->GetSelData(sSQL,arVals);

		for (i = 0;i < arVals.GetSize();i++)
		{
			m_wndComboMatersFit.InsertString(i,arVals.GetAt(i));

			if (m_sMertialFit.CompareNoCase(arVals.GetAt(i)) == 0)
			{
				m_wndComboMatersFit.SetCurSel(i);
			}
		}

		// 初始化管线系统
		{
			CString sStd(CoreTools::getCurrentPipeSysTblName()), sTemp;
			//sSQL = _T("select tablename from wpipecfg where currstd=1");
			//m_pDb->GetSelData(sSQL, sStd);

			sSQL.Format(_T("select distinct system from %s"), sStd);
			CStringArray arSyses;
			m_pDb->GetSelData(sSQL, arSyses);
			m_wndComboPipeSys.AddString(_T("不修改管线系统"));
			for (int i = 0; i < arSyses.GetSize(); i++)
			{
				sTemp = arSyses.GetAt(i);
				m_wndComboPipeSys.AddString(sTemp);
			}

			//再从图层中加一遍

			m_wndComboPipeSys.SetCurSel(0);
		}
	}
}

void CPipeMajDlg::InitPressFromDb()
{
	//获取项目名称
	AecDbObjXDataMap xDataMap;
	xDataMap.SetAt(DOC_TRADE, WPipe::ePetro);	//应用行业，石油
	xDataMap.SetAt(DOC_SCALE, _T("1:50"));		//出图比例
	xDataMap.SetAt(DOC_PLOTWIDTH, 0.5);			//最小打印线宽
	xDataMap.SetAt(DOC_DPLOTWIDTH, 0.5);			//双线打印线宽

	xDataMap.SetAt(DOC_WELDDIA, 1.0);			//焊点直径
	xDataMap.SetAt(DOC_PIPEMINDIA, 65.0);		//最小管道直径
	xDataMap.SetAt(DOC_PIPEMAXDIA, 200.0);		//最大管线直径
	xDataMap.SetAt(DOC_PERELBOWDIA, 40.0);		//垂直弯头直径
	xDataMap.SetAt(DOC_BREAKSPACE, 2.0);			//交叉断线间距
	xDataMap.SetAt(DOC_UNIT, 0);					//单位
	xDataMap.SetAt(DOC_DIMTERM, 0);				//标注端符

	xDataMap.SetAt(DOC_DIMTXTH, 2.0);			//标注文字高度
	xDataMap.SetAt(DOC_DIMTXTF, 0.7);			//标注文字宽度系数

	xDataMap.SetAt(DOC_EQPTXTH, 2.0);			//设备标注文字高度
	xDataMap.SetAt(DOC_EQPTXTF, 1.0);			//设备标注文字宽度系数

	xDataMap.SetAt(DOC_STRTXTH, 2.0);			//结构标注文字高度
	xDataMap.SetAt(DOC_STRTXTF, 0.7);			//结构标注文字宽度系数

	xDataMap.SetAt(DOC_SCRIPTT, _T("{0}{-}{1}{-}{2}{-}{3}"));//上标脚本
	xDataMap.SetAt(DOC_SCRIPTB, _T("{4}{-}{5}"));//下标脚本
	xDataMap.SetAt(DOC_ELTYPE, 0);				//标高设置
	xDataMap.SetAt(DOC_ELDESCR, _T("--"));		//标高文本

	if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT,xDataMap))
	{
		acedAlert(_T("\n系统未初始化!"));
		return;
	}

	CString sProject;
	xDataMap.GetAt(DOC_PIDPROJECT,sProject);

	CString sSQL;
	sSQL.Format(_T("select [等级名称] from AecSpecname where [项目名称]='%s'"),sProject);

	CStringArray arValues;
	m_pDb->GetSelData(sSQL,arValues);

	m_wndPressList.ResetContent();
	for (int i = 0;i < arValues.GetSize();i++)
	{
		m_wndPressList.InsertString(i,arValues.GetAt(i));
	}

	int nIndex = m_wndPressList.FindString(0,m_param.szLevel);//压力等级
	if (nIndex != -1)
	{
		m_wndPressList.SetCurSel(nIndex);
	}
	else
	{
		m_wndPressList.SetCurSel(0);
	}

	//压力表
	sSQL.Format(_T("select [压力] from aecpressure order by [压力]"));
	arValues.RemoveAll();
	m_pDb->GetSelData(sSQL,arValues);

	m_wndPressList2.ResetContent();
	for (int i = 0;i < arValues.GetSize();i++)
	{
		m_wndPressList2.InsertString(i,arValues.GetAt(i));
		if ( fabs(_ttof(arValues.GetAt(i)) - m_dPress) < 1.e-3)
		{
			m_wndPressList2.SetCurSel(i);
		}
	}
}

void CPipeMajDlg::SetShowParam(WPipe::PipeParam* pParam)
{
	if (pParam != NULL)
	{
		double dScale = CoreTools::IsMetersUnit() ? 1000. : 1;

		memcpy(&m_param,pParam,sizeof(WPipe::PipeParam));
		m_nDN = (int)(pParam->m_dDN * dScale + 0.5);
		m_dOD = pParam->m_dOD * dScale;
		m_dt = pParam->m_dThick * dScale;
		m_dRatio = pParam->m_dRRatio;
		m_nRadioOn = 1;// pParam->m_nRadioOn;
		m_sPress = pParam->szLevel;
		m_dPress = pParam->m_dPress;
		m_sMertial = pParam->szMertial;
		m_sMertialFit = pParam->szMertialFit;
		//兼容
		if (m_sMertial.Find(_T("衬塑")) != -1)
		{
			m_sMertial = _T("衬塑管");
			m_sMertialFit = _T("衬塑管");
			_tcscpy(m_param.szMertial, m_sMertial);
			_tcscpy(m_param.szMertialFit, m_sMertialFit);
		}
	}
}

void CPipeMajDlg::GetPipeParam(WPipe::PipeParam* pParam) const
{
	if (pParam != NULL)
	{
		memcpy(pParam,&m_param,sizeof(WPipe::PipeParam));
	}
}