envi-code/SourceCode/Code2026/tg_shs/shs_pipebase/THImpHvacFlange.h

#if !defined(AFX_THIMPHVACFLANGE_H__)
#define AFX_THIMPHVACFLANGE_H__

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

#include "TImpSpecFitting.h"

class THImpHvacFlange : public TImpSpecFitting  
{
public:
	THImpHvacFlange();
	virtual ~THImpHvacFlange();
protected:
	//{{AFX_ARX_METHODS(THImpHvacElbow)
	virtual BOOL IsValid(TDbXDataMap* pXMap);
	virtual void GetKindName(CString& sName);
	virtual int	 GetInterfaceCount() const;
	virtual BOOL GetInterface(int nIndex,TInterface& pipeInterface) const;	
	virtual BOOL GetInterface(const AcGePoint3d& ptConnect,TInterface& pipeInterface) const;
	virtual BOOL HasInterface(const AcGePoint3d& ptConnect,const AcGeVector3d& vtDir);
	virtual BOOL SetInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect);
	virtual BOOL SetInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect1,const AcDbObjectId& idConnect2);
	virtual BOOL RemoveInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect);
	virtual BOOL NotifyInterfaceToModify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
    virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &mode) const;
    virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &mode) const;
	virtual AcDbPolyline* MakePolyCurve() const;
	virtual BOOL MakeCurves(TComplexCurve& cplCurve) const;
	virtual BOOL GetCurvesInSide(TComplexCurve& compCurve) const;
	virtual BOOL MakePolyCurveFaces(AcDbVoidPtrArray& arFaces);
	virtual Acad::ErrorStatus transformBy(const AcGeMatrix3d& xform);
	virtual TDb::Position ExplainGripIndex(int nIndex) const;
	virtual Acad::ErrorStatus getStretchPoints(AcGePoint3dArray& stretchPoints) const;
	virtual Acad::ErrorStatus getGripPoints(AcGePoint3dArray& gripPoints, AcDbIntArray& osnapModes, AcDbIntArray& geomIds) const;
	virtual Acad::ErrorStatus getOsnapPoints(AcDb::OsnapMode osnapMode, INT_PTR gsSelectionMark, const AcGePoint3d& pickPoint, const AcGePoint3d& lastPoint,
		const AcGeMatrix3d& viewXform, AcGePoint3dArray& snapPoints, AcDbIntArray& geomIds) const;	
	virtual Acad::ErrorStatus moveStretchPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset);
	virtual Acad::ErrorStatus moveGripPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset);
	virtual Acad::ErrorStatus getClassID(CLSID* pClsid) const;
	virtual BOOL OPMInfo(LPCTSTR pszName, TDb::OPMInfo* pInfo);
	virtual void GetTips(CMapStringToString& mapLable2Tip) const;
	virtual void list() const;
	//}}AFX_ARX_METHODS

	// 处理实体删除后操作
	virtual void OnSubErase(Adesk::Boolean erasing);

	// 用户自定义调用, 用于复制法兰预览位移时，删除接口。区别仅位移情况 090916
	virtual LRESULT UserCall(long i,LPVOID pData);

public:
	//获取三维的壳对象
	virtual int GetXBaseShell(TXShell& xShell);
	
	//获取体的范围方块
	virtual int GetBodyBox(AcDbExtents& ext);

	// add by hh 2010-12-27 导出XML
//	virtual CString GetXml() const;
	virtual CString GetXml(const AcGeMatrix3d& mat) const;

	// mcl add 2011.1.30 剖切功能。 注意 GetSection内不应将std::vector<TObjSectionRecord>参数清空
	virtual bool GetSection(const AcDbFace &face, const AcGeVector3d &vtPlaneSecDir, 
		std::vector<TObjSectionRecord> &sectionRecord, AcDbVoidPtrArray& arFillPtrs) const;
	
	// 剖切用，返回Z坐标最高、最低点
	virtual Acad::ErrorStatus GetExtents(TADSGePoint3d &ptLow, TADSGePoint3d &ptUp) const;

	// add by hh 2014-08-06 支持管件与水管遮挡
	virtual Acad::ErrorStatus GetClipBoundary(TGGePoly2D& poly)const;
	virtual bool IsMeClip() const;
	virtual bool IsClipMe(const TEntityBase* pEnt=NULL)const;//ok是否被裁剪

private:
	// 得到边线宽
	double GetEdgeLineWidth() const;
	// 得到中线宽
	double GetCentLineWidth() const;
	// 变径是否水平放置
	BOOL IsHorzAlignment() const;
	// 变径是否垂直放置
	BOOL IsVertAlignment() const;
	// 是否是单线变径
	BOOL IsSingleLine() const;

	// 获取接口尺寸数据type，size，size1
	BOOL GetInterfaceSizeData(int nIndex, TInterface& pipeInterface) const;

	// 夹点移动消息处理
	BOOL OnMoveGripPointMsgNotify(const TInterfaceModifyMsg& iModiMsg, TInterfaceModifyMsgs& iModiMsgs);
	// 对象移动消息处理
	BOOL OnTransformMsgNotify(const TInterfaceModifyMsg& iModiMsg, TInterfaceModifyMsgs& iModiMsgs);
	// 尺寸调整消息处理
	BOOL OnSizeMsgNotify(const TInterfaceModifyMsg& iModiMsg, TInterfaceModifyMsgs& iModiMsgs);
	Acad::ErrorStatus OnCHorEqualRMoveGripPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset);
	
	// 二维VertView
	// 矩形二维绘制
	BOOL MakeRectangle2D(TComplexCurve& cplCurve) const;
	// 圆形二维绘制
	BOOL MakeCircle2D(TComplexCurve& cplCurve) const;

	// 二维HorzView
	// 二维单线
	BOOL MakeHSingleLine2D(TComplexCurve& cplCurve) const;
	// 二维双线开口
	BOOL MakeHOpenDbLine2D(TComplexCurve& cplCurve) const;
	// 二维双线封口
	BOOL MakeHCloseDbLine2D(TComplexCurve& cplCurve) const;
	// 二维三线
	BOOL MakeHCloseTrLine2D(TComplexCurve& cplCurve) const;
	//任意角度
	BOOL MakeAnyAngle2D(TComplexCurve& cplCurve, int nType = 0) const;
	// 圆形法兰倾斜二维图形
	BOOL MakeCirInclineLine2D(TComplexCurve& cplCurve, int nType = 0) const;
	// 得到倾斜法兰二维图形的圆弧点
	BOOL GetInclineAnglePts(AcGePoint3dArray &arpts, AcGePoint3dArray &arpts1) const;

	// 类似风管同名函数,得到法兰管件的四个点Lixl add
	void GetFourKeyPoints( AcGePoint3dArray &ptArr ) const;

	// 三维
	// 矩形口
	void MakeRectangle3D(XExplodeDraw &mode) const;
	// 圆形口
	void MakeCircle3D(XExplodeDraw &mode) const;

	// GetFaces
	// 矩形
	BOOL MakeRectangleFaces(AcDbVoidPtrArray& arFaces);
	// 圆形
	BOOL MakeCircleFaces(AcDbVoidPtrArray& arFaces);
	// 单线
	BOOL MakeSigleLineFaces(AcDbVoidPtrArray& arFaces);
	// 多线
	BOOL MakeMultiLineFaces(AcDbVoidPtrArray& arFaces);
	
	// PolyCurve
	// 矩形
	AcDbPolyline* MakeRectanglePolyCurve() const;
	// 圆形
	AcDbPolyline* MakeCirclePolyCurve() const;
	// 单线
	AcDbPolyline* MakeSingleLinePolyCurve() const;
	// 多线
	AcDbPolyline* MakeMultiLinePolyCurve() const;

	// 辅助构建决定遮挡面, pt1, pt2, pt3分别为面上不同三点，vtNormal为法向，dEle返回距原点高度
	AcGePlane GetHidePlane(AcGePoint3d pt1, AcGePoint3d pt2, AcGePoint3d pt3,  
										const AcGeVector3d vtNormal, double &dEle) const;

	// 以ucsZ基准制作标准面，ptOnPlan过面上的点
	AcGePlane GetStdPrjPlan( const AcGePoint3d &ptOnPlan ) const;
	
	
	BOOL GetAnyAnglePts(AcGePoint3dArray &arpts, AcGePoint3dArray &arpts1) const;

	// 管件自由移动处理
	Acad::ErrorStatus MoveGripRandom(TDb::Position ePos, const AcGeVector3d& offset );
	
	// 是否在连接的风管内移动, 没有连接风管也返回FALSE
	BOOL IsMovedWithInDuct(const AcGeVector3d &vtOffset);
};

#endif // !defined(AFX_THIMPHVACFLANGE_H__)