envi-code/SourceCode/Code2026/tg_shs/inc/TArch/DbOpeningSlot.h

/**************************************
          门窗套实体定义
必须首先确定门窗套所属墙的内外侧
 暂时不支持任意洞、转角窗和弧窗
***************************************/
/****************************************************

门窗套类型：  标准样式、垂直通高、水平通长
窗套线侧类型：墙外侧有、墙内侧有、两侧都有、两侧都没有
檐板窗台类型：没有檐板和窗台、有檐板和窗台、只有檐台、只有窗台

****************************************************/
#ifndef __DBOPENINGSLOT_H
#define __DBOPENINGSLOT_H

//#include "dbentity.h"

#define CMF_SHOWSHAPE	0x01
#define CMF_NO2D		0x02
#define CMF_NO3D		0x04

//檐板、窗台内外侧无
#define SIDE_NOBI  0x01
#define SIDE_NOBO  0x02
#define SIDE_NOSI  0x04
#define SIDE_NOSO  0x08


class TARCH_EXP TDbOpeningSlot:public TDbEntity {
    DECLARE_TENTBASE();
    ACRX_DECLARE_MEMBERS(TDbOpeningSlot);
public:
   //门窗套类型：0－标准样式、1－垂直通高、2－水平通长
   enum SlotKind { SLOT_STANDARD=0, SLOT_VERHEI=1, SLOT_HORLEN=2,};

   //窗套线侧类型：0－墙外侧有、1－墙内侧有、2－两侧都有、3－两侧都没有
   enum SlotSide { SIDE_OUT=0, SIDE_IN=1, SIDE_BOTH=2, SIDE_NONE=3,};

   //檐板窗台类型：0－没有檐板和窗台、1－有檐板和窗台、2－只有檐台、3－只有窗台
   enum BoardKind { BS_NONE=0, BS_BOTH=1, BS_BOARD=2, BS_SILL=3,};
protected:
	//截面形状必须是平面，位置可任意，以右下角为基点
    XPoly2D				m_polyShape;
	AcDbSoftPointerId	m_idOpening; //门窗套所在门窗

	SlotKind			m_enumSlotKind;
	SlotSide			m_enumSlotSide;
	BoardKind			m_enumBoardKind;
	BOOL				m_bHasSlot;

	ads_real m_dInsideSlotW,m_dOutsideSlotW;
	ads_real m_dSlotA,m_dSlotT;
	ads_real m_dSlotBoardWid;

	ads_real m_dBoardA,m_dBoardH,m_dBoardW;
	ads_real m_dSillA,m_dSillH,m_dSillW;

	//檐板窗台内外侧无
	Adesk::UInt16		m_nBSSideFlag;
    Adesk::UInt16 m_nCMFlag;//二维、三维和断面

	AcDbHardPointerId m_idLayerBoard3d, m_idLayerSill3d; //檐板和窗台

public:
   TDbOpeningSlot();
   ~TDbOpeningSlot();
public:
// SetMethod
	//  门窗套线所属的门窗Id
    void SetOpeningId(const AcDbObjectId idOpening);

	//**************************窗套线*******************************
	//  判断是否有窗套线
	void SetHasSlot(BOOL bHas);

	//  窗套线截面形状XPoly2D(平面)
	void SetShapePoly(const XPoly2D &polyShape);

	//门窗套类型：TDbOpeningSlot::SLOT_STANDARD－标准样式；
	//            TDbOpeningSlot::SLOT_VERHEI  －垂直通高；
	//            TDbOpeningSlot::SLOT_HORLEN  －水平通长；
	void SetSlotKind(const SlotKind enumSlotKind) {
		m_enumSlotKind = enumSlotKind;
	};

	//窗套线侧类型：TDbOpeningSlot::SIDE_OUT －墙外侧有；
	//              TDbOpeningSlot::SIDE_IN  －墙内侧有；
	//              TDbOpeningSlot::SIDE_BOTH－两侧都有；
	//              TDbOpeningSlot::SIDE_NONE－两侧都没有	
	void SetSlotSide(const SlotSide enumSlotSide) {
		m_enumSlotSide = enumSlotSide;
	};

	//当门窗套类型是垂直通高和水平通长时候的檐板宽度
	void SetSlotBoardWid(const ads_real dWidth);

	//  门窗套的内侧截面高度W1
	void SetInsideSlotW(const ads_real dInsideSlotW);

	//  门窗套的外侧截面高度W2
	void SetOutsideSlotW(const ads_real dOutsideSlotW);

	//  门窗套的A（截面宽度）和T参数
	void SetSlotAT(const ads_real dSlotA,const ads_real dSlotT);

	//**********************檐板和窗台*******************************
	//  窗台的参数A（）、H（厚度）、W（外挑长度）
	void SetBoardSize(const ads_real dBoardA,const ads_real dBoardH,
		const ads_real dBoardW);

	//  窗台的参数A（）、H（厚度）、W（外挑长度）
	void SetSillSize(const ads_real dSillA,const ads_real dSillH,
		const ads_real dSillW);

	//檐板窗台类型：TDbOpeningSlot::BS_NONE －没有檐板和窗台；
    //              TDbOpeningSlot::BS_BOTH －有檐板和窗台；
    //              TDbOpeningSlot::BS_SILL －只有檐台；
    //              TDbOpeningSlot::BS_BOARD－只有窗台
	void SetBoardKind(const BoardKind enumBoardKind){
		m_enumBoardKind = enumBoardKind;
	};

	// 檐板哪一侧有（内外）
	void SetBoardSide(BOOL bInside = TRUE, BOOL bOutside = TRUE);
	// 窗台哪一侧有（内外）
	void SetSillSide( BOOL bInside = TRUE, BOOL bOutside = TRUE);
	void SetLayerBoard3d(AcDbObjectId id) {
		assertWriteEnabled();
		m_idLayerBoard3d=id;
	}
	void SetLayerSill3d(AcDbObjectId id) {
		assertWriteEnabled();
		m_idLayerSill3d=id;
	}

//GetMethos
	//  判断是否有窗套线
	BOOL HasSlot() const;

	//  门窗套线所属的门窗Id
	AcDbObjectId GetOpeningId() const;

	//  窗套线截面形状XPoly2D
    const XPoly2D & GetShapePoly() const;

	//门窗套类型：TDbOpeningSlot::SLOT_STANDARD－标准样式；
	//            TDbOpeningSlot::SLOT_VERHEI  －垂直通高；
	//            TDbOpeningSlot::SLOT_HORLEN  －水平通长；
	SlotKind GetSlotKind() const;

	//窗套线侧类型：TDbOpeningSlot::SIDE_OUT －墙外侧有；
	//              TDbOpeningSlot::SIDE_IN  －墙内侧有；
	//              TDbOpeningSlot::SIDE_BOTH－两侧都有；
	//              TDbOpeningSlot::SIDE_NONE－两侧都没有	
	SlotSide GetSlotSide() const;

	//檐板窗台类型：TDbOpeningSlot::BS_NONE －没有檐板和窗台；
	//              TDbOpeningSlot::BS_BOTH －有檐板和窗台；
	//              TDbOpeningSlot::BS_SILL －只有檐台；
	//              TDbOpeningSlot::BS_BOARD－只有窗台
	BoardKind GetBoardKind() const;

	void GetSlotAT(ads_real& dSlotA,ads_real& dSlotT) const;
	ads_real GetSlotBoardWid() const;

	ads_real GetInsideSlotW() const;
	ads_real GetOutsideSlotW() const;

	void GetBoardSize(ads_real& dBoardA,ads_real& dBoardH,ads_real& dBoardW) const;
	void GetSillSize(ads_real& dSillA,ads_real& dSillH,ads_real& dSillW) const;

	void GetBoardSide(BOOL &bInside, BOOL &bOutside) const;
	void GetSillSide(BOOL &bInside, BOOL &bOutside) const;
	AcDbObjectId GetLayerBoard3d() const {
		return m_idLayerBoard3d;
	}
	AcDbObjectId GetLayerSill3d() const {
		return m_idLayerSill3d;
	}

	//檐板窗台截面
	XPoly2D GetBoardShape() const;
	XPoly2D GetSillShape() const;
	XPoly2D GetSlotTShape() const;

public:
	// 1--- 显示属性（二维、三维和截面显示）
	// 2--- 门窗套类型（标准...）
	// 3--- 参数
	virtual void CopyPropertiesFrom(AcDbEntity *pSrcEntity, unsigned gMatchFlag);

    // Overriden function from AcDbEntity
    Acad::ErrorStatus subGetClassID(CLSID* pClsid) const;
    Acad::ErrorStatus subGetOsnapPoints(
                                 AcDb::OsnapMode		osnapMode,
                                 INT_PTR					gsSelectionMark,
                                 const AcGePoint3d&		ptPick,
                                 const AcGePoint3d&		lastPoint,
                                 const AcGeMatrix3d&	viewXform,
                                 AcGePoint3dArray&		snapPoints,
                                 AcDbIntArray&			geomIds) const;
   virtual Acad::ErrorStatus dwgInFields (AcDbDwgFiler*);
   virtual Acad::ErrorStatus dwgOutFields(AcDbDwgFiler*) const;
   virtual Acad::ErrorStatus dxfInFields (AcDbDxfFiler*);
   virtual Acad::ErrorStatus dxfOutFields(AcDbDxfFiler*) const;
   // derived from AcDbObject, Reactor函数
   virtual void erased(const AcDbObject* pDbObj, Adesk::Boolean erasing = Adesk::kTrue);
   virtual void modified(const AcDbObject* pDbObj);

   // drived from TEntityBase
	virtual bool IsModelEntity() const{return true;} 
   virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &dc) const;
   virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &dc) const;
   virtual void GetTips(DList<TObjInfoUnit> &) const; //取动态属性显示数据

   //可改变截面形状（夹点操作）
   virtual Acad::ErrorStatus subGetGripPoints(
							AcGePoint3dArray&	gripPoints,
                            AcDbIntArray&		osnapModes,
                            AcDbIntArray&		geomIds) const;
   virtual  Acad::ErrorStatus subMoveGripPointsAt(
							const AcDbIntArray& indices,
							const AcGeVector3d& offset);
   virtual Acad::ErrorStatus GetGripText(int i, CString &cs) const;
	virtual int GetFirstVersion()const{return 6;}//ok

public:
	virtual BOOL IsValid() const;

	void ShowShape(BOOL bFlag);
    void SetHas2D(BOOL bFlag);
    void SetHas3D(BOOL bFlag);

	BOOL IsShapeShow() const;
    BOOL Has2D() const;
    BOOL Has3D() const;

protected:
	Acad::ErrorStatus DrawShape(const XPoint &ptBase,XExplodeDraw &dc) const;

private:
	//普通窗（也可普通门、字母门、凸窗、矩形洞）
	void GetWinSlotUints(const BOOL    bHasSlot,
						const BOOL     bNoLow,
						const BoardKind enumBoardKind,
						const XPoly2D& polySlotPlane,
						const double   dSlotW,
						DList<XPoly2D>& lstSlot,
						XPoly2D&  polyBoard,
						XPoly2D&  polyBoardT,
						XPoly2D&  polySill,
						XPoly2D&  polySillT,
						XPoly2D&  polyBoardSlot,
						XPoly2D&  polyBoardSlotT) const;
	void GetDoorWinSlotUints(const BOOL bHasSlot,
						const BOOL     bNoLow,
						const BoardKind enumBoardKind,
						const XPoly2D& polySlotPlane,
						const double   dSlotW,
						DList<XPoly2D>& lstSlot,
						DList<XPoly2D>& lstSlotT,
						XPoly2D&  polyBoard,
						XPoly2D&  polyBoardT,
						XPoly2D&  polySill,
						XPoly2D&  polySillT,
						XPoly2D&  polyBoardSlot,
						XPoly2D&  polyBoardSlotT) const;//门联窗
	Acad::ErrorStatus Draw3D(XExplodeDraw &dc,
						const DList<XPoly2D>& lstSlot,//窗套线路径
						const DList<XPoly2D>& lstSlotT,
						const XPoly2D& polyBoard,//檐板路径
						const XPoly2D& polyBoardT,
						const XPoly2D& polySill,//窗台路径
						const XPoly2D& polySillT,
						const XPoly2D& polyBoardSlot,//窗套线檐板路径
						const XPoly2D& polyBoardSlotT,
						const XPoly2D& polyShapeT,
						const XVector3D& vtNormal,
						const BOOL bOutside=TRUE,
						const BOOL bLeftExt=TRUE,
						const BOOL bQuadrant=FALSE) const;

private:
    const static Adesk::UInt8 g_nVersion;
};

#endif