envi-code/SourceCode/Code2026/tg_shs/inc/pipewire/DbGouge.h

#ifndef AFX_DBGOUGE_H__ 
#define AFX_DBGOUGE_H__ 

#if _MSC_VER > 1000
#pragma once
#endif  

#include "DbPipeCanal.h"
#define MINDIST 500

class PS_EXP TDbCableTrench : public TDbPipeCanal  
{
	DECLARE_TENTBASE();
    ACRX_DECLARE_MEMBERS(TDbCableTrench); 
public:
	TDbCableTrench();
	~TDbCableTrench();

	enum GougeStyle
	{
		eGNull =  0,				// 空
		eGCover = 1,				// 盖板	
		eGLSide = 2,				// 靠左边
		eGRSide = 3,				// 靠右边
		eGOrder = 4,				// 两边对齐
		eGInter = 5					// 两边交错
	};

	//宽度
	void SetGougeWidth(double dWidth);
	//电缆沟沟深
	void SetGougeHeight(double dHeight);
	//电缆沟线宽
	void SetGougeLineWidth(double dLineW);
	//电缆沟支架形式
	void SetGougeMode(Adesk::UInt16 nType);
	//支架长度
	void SetBracketLen(double dLen);
	//支架间距
	void SetBracketDis(double dDis);
	//支架线宽
	void SetBracketLineWidth(double dLineW);
	//拐角类别
	void SetCornerType(Adesk::UInt16 nType);
	//倒角半径
	void SetCornerRadius(double dRadius);
	//电缆编号
	void SetTrenchNo(LPCTSTR lpNo);

	//宽度
	double GetGougeWidth();
	//电缆沟沟深
	double GetGougeHeight();
	//电缆沟线宽
	double GetGougeLineWidth();
	//电缆沟支架形式
	Adesk::UInt16    GetGougeMode();
	//支架长度
	double GetBracketLen();
	//支架间距
	double GetBracketDis();
	//支架线宽
	double GetBracketLineWidth();	
	//拐角类别
	Adesk::UInt16 GetCornerType();
	//倒角半径
	double GetCornerRadius() const;
	//得到电缆编号
	void   GetTrenchNo(CString &sNo);

	virtual CString GetXml(const AcGeMatrix3d& mat) const;
	
public: // Override TDbEntity
	Acad::ErrorStatus         subGetOsnapPoints(AcDb::OsnapMode osnapMode, INT_PTR gsSelectionMark, const AcGePoint3d&	ptPick, const AcGePoint3d&	lastPoint, const AcGeMatrix3d&	viewXform, AcGePoint3dArray& snapPoints, AcDbIntArray& geomIds) const;
    virtual void CopyPropertiesFrom(AcDbEntity *pSrc, unsigned gMatchFlag);
    virtual Acad::ErrorStatus subGetClassID(CLSID* pClsid) const;
    virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &dc) const;
    virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &dc) const;

	virtual Acad::ErrorStatus dwgInFields (AcDbDwgFiler*);
    virtual Acad::ErrorStatus dwgOutFields(AcDbDwgFiler*) const;
    virtual Acad::ErrorStatus dxfInFields (AcDbDxfFiler*);
    virtual Acad::ErrorStatus dxfOutFields(AcDbDxfFiler*) const;
 	virtual BOOL CanMergeWith(const TDbPipePrototype &other, int *iPosThis=NULL,
 								int *iPosOther=NULL) const;
	// 自动增加节点到当前数据库，ids－该节点自动连接的管线，派生类应当重载
	virtual AcDbObjectId AddAutoNodeToDb(const XPoint &ptAt, const DList<AcDbObjectId> &ids) const;

	virtual int GetFirstVersion()const{return 8;}
	// 绘制电缆沟支架

	// add by 2011.02.21 剖切功能 注意 GetSection内不应将std::vector<TObjSectionRecord>参数清空
	virtual bool GetSection(const AcDbFace &face, const AcGeVector3d &vtPlaneSecDir, 
		std::vector<TObjSectionRecord> &sectionRecord, AcDbVoidPtrArray& arFillPtrs) const;

	// 剖切用，返回Z坐标最高、最低点
	virtual Acad::ErrorStatus GetExtents(TADSGePoint3d &ptLow, TADSGePoint3d &ptUp) const;

	virtual	int GetBodyBox(AcDbExtents& ext);
	
protected:
	void  ExplodeOrDrawPipeCanal(XExplodeDraw &dc) const;
	void  ExplodeOrDrawCanalType1(XExplodeDraw &dc) const;
	void  ExplodeOrDrawCanalType2(XExplodeDraw &dc) const;
	//////////////////////////////////////////////////////////////////////////
	//add liaoy 170627 当拐角半径不同时显示效果不好的问题
	//基于TDbPipeCanal::SortPipeCanal()
	void  SortPipeCanalTrench(const AcGePoint3d &ptOr,const AcDbObjectIdArray &arIds,AcArray<std::pair<AcDbObjectId,XCurveSegment>>& arPairSeg) const;
	//基于TDbPipeCanal::GetCorner2InterPts()
	void  GetCorner2InterPtsTrench(const std::pair<AcDbObjectId,XCurveSegment> &seg1,const const std::pair<AcDbObjectId,XCurveSegment> &seg2,const AcGePoint3d &pt,int nSegCount,AcGePoint3dArray &arPts,AcArray<CornerLine> &map) const;
	void  GetCorner2InterPtsTrench(const XCurveSegment &seg1,const XCurveSegment &seg2,const AcGePoint3d &pt,int nSegCount,double dSpare,AcGePoint3dArray &arPts,AcArray<CornerLine> &map) const;
	//基于TDbPipeCanal::GetInterPts()
	void  GetInterPtsTrench(const AcArray<std::pair<AcDbObjectId,XCurveSegment>> &arPairSeg,AcArray<AcGePoint3d> &arPts,AcArray<CornerLine> &map) const;
	//基于TDbPipeCanal::GetCannalPts()
	void  GetCannalPtsTrench(const AcDbObjectId &id,AcGePoint3d &pt1,AcGePoint3d &pt2,AcArray<CornerLine> &map) const;
	//add end
	//////////////////////////////////////////////////////////////////////////
private:

	// 绘制支架
	Acad::ErrorStatus DrawBrackets(XExplodeDraw &dc,XCurveSegment& cenSeg) const;
	// 单边
	BOOL MakeCurvesOfCableGougeSide(AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> >& arBracket,XCurveSegment& cenSeg) const;
	// 对立
	BOOL MakeCurvesOfCableGougeOrder(AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> >& arBracket,XCurveSegment& cenSeg) const;
	// 交错
	BOOL MakeCurvesOfCableGougeInter(AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> >& arBracket,XCurveSegment& cenSeg) const;
	// 判断端口是否需要绘制连接线
	BOOL IsHasMorePipes(const AcDbObjectId& idNode) const;
	// 节点连接的管子个数
	int GetNodeCntPipeNumber(const AcDbObjectId& idNode) const;
	// 绘制支架
	void DrawBracketsFun(const AcGeVector3d& vtHor,const AcGeVector3d& vtVer,const AcGePoint3d& ptStart,const AcGePoint3d& ptEnd,AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> >& arBracket) const;
	void DrawBracketsFun(const AcGeVector3d& vtHor,const AcGeVector3d& vtVer,const AcGePoint3d& ptStart,double dLen,AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> >& arBracket) const;
	// 绘制拐角处支架
	void DrawBracketOfCorner(const AcGePoint3d& ptRef,AcArray<CornerLine>& mapPt,AcArray<XCurveSegment, AcArrayObjectCopyReallocator<XCurveSegment> >& arBracket,const AcDbObjectId& idNode) const;
	// 得到指定连接点的拐角点组
	BOOL GetCornerPtMap(const AcGePoint3d& ptRef,AcArray<CornerLine>& mapPt,CornerLine& temOut) const;
	// 重新构建绘制支架的线
	BOOL ReConstructBracketLine(AcGePoint3d& ptS,AcGePoint3d& ptE,const AcDbObjectId& idNode) const;
	// 得到相连的另一条沟的宽度和倒角半径
	void GetAnotherTrenchParam(const AcGeVector3d& vtHor,const AcDbObjectId& idNode,double& dWidth,double& dRadius) const;
	// 获取垂足点
	BOOL GetVerticalFootPoint(const AcGePoint3d& pickPoint,const AcGePoint3d& lastPoint,AcGePoint3d& ptVerFoot) const;
	// 获取最近点
	BOOL GetNearestPoint(const AcGePoint3d& pickPoint,AcGePoint3d& ptNear) const;
	// 释放内存
	void FreeBuffer(AcArray<AcDbLine*>& cplCurve) const;

private:
    static const Adesk::UInt8 g_nVersion;
	double   m_dGougeLineW;   //电缆沟线宽
	Adesk::UInt16      m_nBracketMode;  //支架形式
	double   m_dBracketLen;   //支架长度
	double   m_dBracketDis;   //支架间距
	double   m_dBracketLineW; //支架线宽
	Adesk::UInt16      m_nCornerType; //拐角类别
	XString  m_sTrenchNo;     //电缆沟编号

	XString     m_sSpare;       // 备用  
    double      m_dSpare;       // 备用 
	Adesk::UInt16         m_nSpare;		// 备用 
};

#endif // !defined(AFX_DBGOUGE_H__61B791DA_199E_45EC_B50D_C6CC518EFCE0__INCLUDED_)