envi-code/SourceCode/Code2026/tg_shs/shs_pipebase/THImpHvacVRVBrPipe.cpp

#include "stdafx.h"
#include "StdArx.h"
#include "THImpHvacVRVBrPipe.h"
#include "TDbInterfaceRecord.h"
#include "TDbXDataMap.h"
#include "TDbInterfaceMsgWrite.h"
#include "math.h"
#include "dbxutil.h"
#include <dbelipse.h>

using namespace TDb;

#ifdef _DEBUG
#undef THIS_FILE
static char THIS_FILE[]=__FILE__;
#define new DEBUG_NEW
#endif


THImpHvacVRVBrPipe::THImpHvacVRVBrPipe()
{
}

THImpHvacVRVBrPipe::~THImpHvacVRVBrPipe()
{
}

BOOL THImpHvacVRVBrPipe::GetInterfaceSizeData(int nIndex, TInterface& pipeInterface) const
{
	AcGePoint3dArray arpts;
	if(!GetPts(arpts))
		return Acad::eNotApplicable;
	
	// 获取各点位置
	AcGePoint3d ptStart = arpts[0], ptEnd = arpts[4], ptBran = arpts[6];
	
	// 求各端方向
	AcGeVector3d vtStart = GetVtMain(), vtEnd, vtBran;
	vtEnd = vtBran = -vtStart;
	CString sDesc = _T("冷媒出口");

	switch(nIndex)
	{
	case 0:
		{
			pipeInterface.SetOutDir(vtStart);
			pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
			pipeInterface.SetPosition(ptStart);
			sDesc = _T("冷媒进口");
			sDesc += GetMediaPipeDn();
			pipeInterface.SetDescr(sDesc);
			pipeInterface.SetType(4);
			return TRUE;
		}
	case 1:
		{
			pipeInterface.SetOutDir(vtEnd);
			pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
			pipeInterface.SetPosition(ptEnd);
			sDesc += GetMediaPipeDn();
			pipeInterface.SetDescr(sDesc);
			pipeInterface.SetType(4);
			return TRUE;
		}
	case 2:
		{
			pipeInterface.SetOutDir(vtBran);
			pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
			pipeInterface.SetPosition(ptBran);
			sDesc += GetMediaPipeDn();
			pipeInterface.SetDescr(sDesc);
			pipeInterface.SetType(4);
			return TRUE;
		}
	}
	return FALSE;
}

BOOL THImpHvacVRVBrPipe::GetInterface(int nIndex,TInterface& pipeInterface) const
{
	AcGePoint3dArray arpts;
	if(!GetPts(arpts))
		return Acad::eNotApplicable;
	
	// 获取各点位置
	AcGePoint3d ptStart = arpts[0], ptEnd = arpts[4], ptBran = arpts[6];

	// 求各端方向
	AcGeVector3d vtStart = GetVtMain(), vtEnd, vtBran;
	vtEnd = vtBran = -vtStart;
	
	AcDbObjectId id;
	switch(nIndex)
	{
	case 0:
		// 如果起始接口和第一个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT1, id) && MakesureInterfaceValidate(id, ptStart, vtStart, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 如果起始接口和第二个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT2, id) && MakesureInterfaceValidate(id, ptStart, vtStart, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 如果起始接口和第三个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT3, id) && MakesureInterfaceValidate(id, ptStart, vtStart, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 没有管件连接
		pipeInterface.SetOutDir(vtStart);
		pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
		pipeInterface.SetPosition(ptStart);
		GetInterfaceSizeData(nIndex, pipeInterface);
		return TRUE;
	case 1:
		// 如果末尾接口和第一个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT1, id) && MakesureInterfaceValidate(id, ptEnd, vtEnd, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 如果末尾接口和第二个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT2, id) && MakesureInterfaceValidate(id, ptEnd, vtEnd, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 如果末尾接口和第三个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT3, id) && MakesureInterfaceValidate(id, ptEnd, vtEnd, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 没有管件连接
		pipeInterface.SetOutDir(vtEnd);
		pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
		pipeInterface.SetPosition(ptEnd);
		GetInterfaceSizeData(nIndex, pipeInterface);
		return TRUE;
	case 2:
		// 如果支管接口和第一支管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT1, id) && MakesureInterfaceValidate(id, ptBran, vtBran, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 如果支管接口和第二个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT2, id) && MakesureInterfaceValidate(id, ptBran, vtBran, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 如果支管接口和第三个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT3, id) && MakesureInterfaceValidate(id, ptBran, vtBran, pipeInterface))
		{
			GetInterfaceSizeData(nIndex, pipeInterface);
			return TRUE;
		}
	
		// 没有管件连接
		pipeInterface.SetOutDir(vtBran);
		pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
		pipeInterface.SetPosition(ptBran);
		GetInterfaceSizeData(nIndex, pipeInterface);
		return TRUE;
	}

	return FALSE;
}

BOOL THImpHvacVRVBrPipe::GetInterface(const AcGePoint3d& ptCon,TInterface& pipeInterface) const
{
	AcGePoint3dArray arpts;
	if(!GetPts(arpts))
		return Acad::eNotApplicable;
	
	// 获取各点位置
	AcGePoint3d ptStart = arpts[0], ptEnd = arpts[4], ptBran = arpts[6];
	
	// 求各端方向
	AcGeVector3d vtStart = GetVtMain(), vtEnd, vtBran;
	vtEnd = vtBran = -vtStart;
	
	// 计算测试点到始末点的距离
	double dDist1 = ptCon.distanceTo(ptStart);
	double dDist2 = ptCon.distanceTo(ptEnd);
	double dDist3 = ptCon.distanceTo(ptBran);
	AcDbObjectId id;

	// 位于起始点
	if (dDist1 < 1e-3)
	{
		// 如果起始接口和第一个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT1, id) && MakesureInterfaceValidate(id, ptStart, vtStart, pipeInterface))
		{
			GetInterfaceSizeData(0, pipeInterface);
			return TRUE;
		}
	
		// 如果起始接口和第二个管件连接
		if (m_pXDataMap->GetAt(KEY_IDCNT2, id) && MakesureInterfaceValidate(id, ptStart, vtStart, pipeInterface))
		{
			GetInterfaceSizeData(0, pipeInterface);
			return TRUE;
		}
	
		// 如果起始接口和第三个管件连接
		if (m_pXDataMap->GetAt(KEY_IDCNT3, id) && MakesureInterfaceValidate(id, ptStart, vtStart, pipeInterface))
		{
			GetInterfaceSizeData(0, pipeInterface);
			return TRUE;
		}
	
		// 没有管件连接
		pipeInterface.SetOutDir(vtStart);
		pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
		pipeInterface.SetPosition(ptStart);
		GetInterfaceSizeData(0, pipeInterface);
		return TRUE;
	} 
	else if (dDist2 < 1e-3)	// 位于末尾点
	{
		// 如果末尾接口和第一个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT1, id) && MakesureInterfaceValidate(id, ptEnd, vtEnd, pipeInterface))
		{
			GetInterfaceSizeData(1, pipeInterface);
			return TRUE;
		}
	
		// 如果末尾接口和第二个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT2, id) && MakesureInterfaceValidate(id, ptEnd, vtEnd, pipeInterface))
		{
			GetInterfaceSizeData(1, pipeInterface);
			return TRUE;
		}
	
		// 如果末尾接口和第三个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT3, id) && MakesureInterfaceValidate(id, ptEnd, vtEnd, pipeInterface))
		{
			GetInterfaceSizeData(1, pipeInterface);
			return TRUE;
		}
	
		// 没有管件连接
		pipeInterface.SetOutDir(vtEnd);
		pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
		pipeInterface.SetPosition(ptEnd);
		GetInterfaceSizeData(1, pipeInterface);
		return TRUE;
	}
	else if (dDist3 < 1e-3)		// 位于支管点
	{
		// 如果末尾接口和第一个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT1, id) && MakesureInterfaceValidate(id, ptBran, vtBran, pipeInterface))
		{
			GetInterfaceSizeData(2, pipeInterface);
			return TRUE;
		}
	
		// 如果末尾接口和第二个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT2, id) && MakesureInterfaceValidate(id, ptBran, vtBran, pipeInterface))
		{
			GetInterfaceSizeData(2, pipeInterface);
			return TRUE;
		}
	
		// 如果末尾接口和第三个管连接
		if (m_pXDataMap->GetAt(KEY_IDCNT3, id) && MakesureInterfaceValidate(id, ptBran, vtBran, pipeInterface))
		{
			GetInterfaceSizeData(2, pipeInterface);
			return TRUE;
		}
	
		// 没有管件连接
		pipeInterface.SetOutDir(vtBran);
		pipeInterface.SetOwnerId(m_pOwnerEnt->objectId());
		pipeInterface.SetPosition(ptBran);
		GetInterfaceSizeData(2, pipeInterface);
		return TRUE;
	}
	return FALSE;
}

BOOL THImpHvacVRVBrPipe::HasInterface(const AcGePoint3d& ptCon,const AcGeVector3d& vtDir)
{
	AcGePoint3dArray arpts;
	if(!GetPts(arpts))
		return Acad::eNotApplicable;
	
	// 获取各点位置
	AcGePoint3d ptStart = arpts[0], ptEnd = arpts[4], ptBran = arpts[6];
	
	// 求各端方向
	AcGeVector3d vtStart = GetVtMain(), vtEnd, vtBran;
	vtEnd = vtBran = -vtStart;

	// 计算测试点到始末点的距离
	double dDist1 = ptCon.distanceTo(ptStart);
	double dDist2 = ptCon.distanceTo(ptEnd);
	double dDist3 = ptCon.distanceTo(ptBran);
	
	// 位于起始点
	if (dDist1 < 1e-3)
		return (vtDir.isParallelTo(vtStart));
	
	// 位于末尾点
	if (dDist2 < 1.e-3)
		return (vtDir.isParallelTo(vtEnd));
	
	// 位于支管点
	if (dDist3 < 1.e-3)
		return (vtDir.isParallelTo(vtBran));
	
	return TRUE;
}

int	 THImpHvacVRVBrPipe::GetInterfaceCount() const
{
	return 3;
}

BOOL THImpHvacVRVBrPipe::SetInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect)
{
	if (NULL == m_pXDataMap)
		return FALSE;
	
	if ( !idConnect.isValid() )
		return FALSE;
	
	// 打开对象
	AcDbEntity* pEnt;
	if (Acad::eOk != acdbOpenObject(pEnt, idConnect, AcDb::kForRead))
		return FALSE;
	
	// 检查对象类型，是否是暖通管件
	if (!(pEnt->isKindOf(TDbHvacDuct::desc()) || pEnt->isKindOf(TDbHvacFitting::desc())
		|| pEnt->isKindOf(TDbHvacEquipment::desc())))
	{
		pEnt->close();
		return FALSE;
	}
	
	AcGePoint3dArray arpts;
	if(!GetPts(arpts))
		return Acad::eNotApplicable;
	
	// 获取各点位置
	AcGePoint3d ptStart = arpts[0], ptEnd = arpts[4], ptBran = arpts[6];
	
	// 求各端方向
	AcGeVector3d vtStart = GetVtMain(), vtEnd, vtBran;
	vtEnd = vtBran = -vtStart;
	
	// 计算测试点到各点的距离
	double dDist1 = ptConnect.distanceTo(ptStart);
	double dDist2 = ptConnect.distanceTo(ptEnd);
	double dDist3 = ptConnect.distanceTo(ptBran);
	
	// 基类指针
	TDbInterfacesObj* pInterfaceObj = TDbInterfacesObj::cast(pEnt);
	ASSERT(NULL != pInterfaceObj);
	
	// 位于起始点
	if (dDist1 < 1e-3 && pInterfaceObj->HasInterface(ptStart, vtStart))
	{
		m_pXDataMap->SetAt(KEY_IDCNT1, idConnect);
		pEnt->close();
		return TRUE;
	}
	
	// 位于末尾点
	if (dDist2 < 1.e-3 && pInterfaceObj->HasInterface(ptEnd, vtEnd))
	{
		m_pXDataMap->SetAt(KEY_IDCNT2, idConnect);
		pEnt->close();
		return TRUE;
	}
	
	// 位于支管点
	if (dDist3 < 1e-3 && pInterfaceObj->HasInterface(ptBran, vtBran))
	{
		m_pXDataMap->SetAt(KEY_IDCNT3, idConnect);
		pEnt->close();
		return TRUE;
	}
	
	pEnt->close();
	return FALSE;
}

BOOL THImpHvacVRVBrPipe::RemoveInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect)
{
	if (NULL == m_pXDataMap)
		return FALSE;
	
	// 浅层次删除; 命名字典中的关系,需要外面移除关系,只移除内部关系
	AcDbObjectId id;
	m_pXDataMap->GetAt(KEY_IDCNT1, id);
	if (id == idConnect)
	{
		m_pXDataMap->SetAt(KEY_IDCNT1, AcDbObjectId::kNull);
		return TRUE;
	}
	
	m_pXDataMap->GetAt(KEY_IDCNT2, id);
	if (id == idConnect)
	{
		m_pXDataMap->SetAt(KEY_IDCNT2, AcDbObjectId::kNull);
		return TRUE;
	}
	
	m_pXDataMap->GetAt(KEY_IDCNT3, id);
	if (id == idConnect)
	{
		m_pXDataMap->SetAt(KEY_IDCNT2, AcDbObjectId::kNull);
		return TRUE;
	}
	return FALSE;
}

BOOL THImpHvacVRVBrPipe::NotifyInterfaceToModify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs)
{
	return FALSE;
}

BOOL THImpHvacVRVBrPipe::MakeCurves(TComplexCurve& cplCurve) const
{
	//绘制两条out接口线
	AcGePoint3dArray arpts;
	if(!GetPts(arpts))
		return FALSE;

	TDb::TCurveElement el;
	memset(&el,0,sizeof(TDb::TCurveElement));
	el.dWidth = GetEndLineWidth();
	el.idSubLay = GetEndLayer();

	if (IsSysMode())
	{
		el.ptGe[0] = arpts[0];
		el.ptGe[1] = arpts[2];
		el.ptGe[2] = arpts[2];
		cplCurve.append(el);
		el.ptGe[0] = arpts[0];
		el.ptGe[1] = arpts[3];
		el.ptGe[2] = arpts[3];
		cplCurve.append(el);
		el.ptGe[0] = arpts[3];
		el.ptGe[1] = arpts[2];
		el.ptGe[2] = arpts[2];
		cplCurve.append(el);
		el.ptGe[0] = arpts[1];
		el.ptGe[1] = arpts[4];
		el.ptGe[2] = arpts[4];
		cplCurve.append(el);
		el.ptGe[0] = arpts[5];
		el.ptGe[1] = arpts[6];
		el.ptGe[2] = arpts[6];
		cplCurve.append(el);
	}
	else
	{	
		el.ptGe[0] = arpts[1]; 
		el.ptGe[1] = arpts[4];
		el.ptGe[2] = arpts[4];
		cplCurve.append(el);
		el.ptGe[0] = arpts[5]; 
		el.ptGe[1] = arpts[6];
		el.ptGe[2] = arpts[6];
		cplCurve.append(el);
	}

	return TRUE;
}

AcDbPolyline* THImpHvacVRVBrPipe::MakePolyCurve() const
{
	return NULL;
}

BOOL THImpHvacVRVBrPipe::MakePolyCurveFaces(AcDbVoidPtrArray& arFaces)
{
	return FALSE;
}

void THImpHvacVRVBrPipe::GetKindName(CString& sName)
{
	sName = _T("ATS_DBHEQUIPMENT");
}
//////////////////////////////////////////////////////////////////////////
//                             2 
//							 ╱│
//                         ╱  │1     4
//                  7   0╱    │______
//                       ╲  8 │
//                         ╲  │______
//							 ╲│5     6  
//                             3
//得到分歧管的各个端点7是命令夹点                             
//点8 用于三维绘制
//
BOOL THImpHvacVRVBrPipe::GetPts(AcGePoint3dArray& arpts) const
{
	AcGePoint3d pt;
	int nType(0);
	int nIsConverse(0);
	AcGeVector3d vtMain(AcGeVector3d::kXAxis), vtMainv(AcGeVector3d::kYAxis), vtNor(AcGeVector3d::kZAxis);
	double dLength(300.0), dH(200.0), dBrLen(100);
	m_pXDataMap->GetAt(HVRV_CenterPoint, pt);
	m_pXDataMap->GetAt(HVRV_MainDir, vtMain);
	m_pXDataMap->GetAt(HVRV_Length, dLength);
	m_pXDataMap->GetAt(HVRV_Width, dBrLen);
	m_pXDataMap->GetAt(HVRV_IsConverse, nIsConverse);	

	vtNor = GetNormal();
	vtMainv = vtMain;
	if (nIsConverse)
	{
		vtMainv = -vtMain;
	}
	vtMainv.rotateBy(PI * 0.5, vtNor);
	vtMain.normalize();
	vtMainv.normalize();
	//等边三角形的高
	dH = dLength * sqrt(3.0) * 0.5; 
	m_pXDataMap->GetAt(KEY_SectType, nType);
	if (nType == 1)
	{
		pt += vtMain * (dH + dBrLen);
	}
	else if (nType == 2)
	{
		pt += vtMain * (dH + dBrLen);
		pt += vtMainv * dLength * 0.25;
	}


	if (IsSysMode())
	{
		CString sAngle = _T("");
		m_pXDataMap->GetAt(HVRV_SPicPipe, sAngle);
		TransformVecor(sAngle, vtMainv);
		TransformVecor(sAngle, vtMain);
	}


	arpts.append(pt);//0
	pt = arpts[0] - vtMain * dH;
	arpts.append(pt);//1
	pt = arpts[1] + vtMainv * dLength * 0.5;
	arpts.append(pt);//2
	pt = arpts[1] - vtMainv * dLength * 0.5;
	arpts.append(pt);//3

	pt = arpts[1] - vtMain * dBrLen;
	arpts.append(pt);//4
	pt = arpts[1] - vtMainv * dLength * 0.25;
	arpts.append(pt);//5
	pt = arpts[4] - vtMainv * dLength * 0.25;
	arpts.append(pt);//6
	pt = arpts[0] + vtMain * g_dCmdOff;
	arpts.append(pt);//7
	pt = arpts[1] + vtMain * dLength * 0.25;
	arpts.append(pt);//8
	if (nIsConverse)
	{
		pt = arpts[8] - vtMainv * dLength * 0.25;
	}
	else
		pt = arpts[8] + vtMainv * dLength * 0.25;
	arpts.append(pt);//9

	return arpts.length() == 10;
}

// 获取外壳的8个顶点
BOOL THImpHvacVRVBrPipe::GetBoxPts(AcGePoint3dArray& arpts) const
{
	AcGePoint3dArray arTmpPts;
	if (!GetPts(arTmpPts))
		return FALSE;
	
	AcGeVector3d vtMain(AcGeVector3d::kXAxis), vtMainv(AcGeVector3d::kYAxis), vtNor(AcGeVector3d::kZAxis);
	double dLength(300);
	int nIsConverse(0);
	m_pXDataMap->GetAt(HVRV_MainDir, vtMain);
	m_pXDataMap->GetAt(HVRV_Length, dLength);
	m_pXDataMap->GetAt(HVRV_IsConverse, nIsConverse);
	vtNor = GetNormal();
	vtMainv = vtMain;
	if (nIsConverse)
	{
		vtMainv = -vtMain;
	}
	vtMainv.rotateBy(PI * 0.5, vtNor);
	vtMain.normalize();
	vtMainv.normalize();

	AcGePoint3d pt;
	pt = arTmpPts[0] + vtMainv * dLength * 0.5 - vtNor * 25;
	arpts.append(pt);
	pt = arTmpPts[4] + vtMainv * dLength * 0.5 - vtNor * 25;
	arpts.append(pt);
	pt = arTmpPts[4] - vtMainv * dLength * 0.5 - vtNor * 25;
	arpts.append(pt);
	pt = arTmpPts[0] - vtMainv * dLength * 0.5 - vtNor * 25;
	arpts.append(pt);
	pt = arTmpPts[0] + vtMainv * dLength * 0.5 + vtNor * 25;
	arpts.append(pt);
	pt = arTmpPts[4] + vtMainv * dLength * 0.5 + vtNor * 25;
	arpts.append(pt);
	pt = arTmpPts[4] - vtMainv * dLength * 0.5 + vtNor * 25;
	arpts.append(pt);
	pt = arTmpPts[0] - vtMainv * dLength * 0.5 + vtNor * 25;
	arpts.append(pt);

	return arpts.length() == 8;
}

int THImpHvacVRVBrPipe::GetBodyBox( AcDbExtents& ext ) const
{
	if (m_pXDataMap == NULL)
		return 0;

	AcGePoint3dArray arpt;
	if (!GetBoxPts(arpt))
		return 0;

	// 构造最小包含体
	TAuxTools::BuildMinRectangle(arpt, ext);
	return 1;
}

int THImpHvacVRVBrPipe::GetXBaseShell(TXShell& xShell)
{
	if (m_pXDataMap == NULL)
		return 0;

	AcGePoint3dArray arpt;
	if (!GetPts(arpt))
		return 0;

	//BEGIN================================================================================
	//AcGePoint3d ptCent;
	//Midpoint(arpt[0], arpt[4], ptCent);
	//AcGePoint3d ptS, ptE;
	AcGeVector3d vtNor = GetNormal();
	//ptS = ptCent - vtNor * 25;
	//ptE = ptCent + vtNor * 25;
	double dWidth = 0.0;
	double dThick = VRVPIPEDIA;
	//m_pXDataMap->GetAt(HVRV_Width, dThick);
	m_pXDataMap->GetAt(HVRV_Length, dWidth);

	// 构造碰撞实体
	TAuxTools::BuildRectDuct(arpt[0], arpt[4], vtNor, dWidth, dThick, dWidth, dThick, xShell);
	//修改时间：2010-06-01
	//修改人  ：王亚东
	//修改原因：支持分歧管的碰撞检测包围壳正确返回
	//END===================================================================================

	return 1;
}

TDb::Position THImpHvacVRVBrPipe::ExplainGripIndex(int nIndex) const
{
	if(nIndex == 0)
	{
		return TDb::eMid;
	}
	else
	{
		return TDb::eCommand0;
	}
}

Acad::ErrorStatus THImpHvacVRVBrPipe::GetGripText(int i, CString &cs) const
{
	if (i == 0)
	{
		cs = _T("改变位置");
	}
	else if( i == 1)
	{
		cs = _T("输入口");;
	}
	else
	{
		cs = _T("输出口");;
	}

	return Acad::eOk;
}

void THImpHvacVRVBrPipe::GetTips(CMapStringToString& mapLable2Tip) const
{
}

BOOL THImpHvacVRVBrPipe::GetPtOnArcExt(AcGePoint3d &ptStartArc, const AcGePoint3d &ptCorStart, AcGePoint3d &ptEndArc, const AcGePoint3d &ptCorEnd, AcGePoint3d &ptOnArcOut, double &dPlusEdge) const
{
	AcGeVector3d vtStr,vtEnd,vtCor,vtNor;
	AcGeVector3d vtStartArc;
	AcGeVector3d vtEndArc;
	AcGePoint3d ptGeCen;
	AcGePoint3d ptCorner;
	
	AcGeVector3d vtCorStartCom = ptCorStart.asVector();
	AcGeVector3d vtCorEndCom = ptCorEnd.asVector();
	AcGeVector3d vtCornerCom = (vtCorStartCom + vtCorEndCom) / 2;
	ptCorner = AcGePoint3d::kOrigin + vtCornerCom;
	
	vtStr = ptStartArc - ptCorStart;
	vtEnd = ptEndArc - ptCorEnd;
	
	vtStr.normalize();
	vtEnd.normalize();
	
	ptStartArc = ptStartArc - vtStr * dPlusEdge;
	ptEndArc = ptEndArc - vtEnd * dPlusEdge;
	
	vtStartArc = ptStartArc - ptCorner;
	vtEndArc = ptEndArc - ptCorner;
	vtNor = vtStartArc.crossProduct(vtEndArc);
	
	vtStartArc.rotateBy(PI * 0.5, vtNor);
	vtEndArc.rotateBy(PI * 0.5, vtNor);
	
    if(!GetIntersectWith(ptStartArc,ptEndArc,vtStartArc,vtEndArc,ptGeCen))
		return FALSE;
	
	vtCor = ptCorner - ptGeCen;
	vtCor.normalize();
	
	ptOnArcOut = ptGeCen + vtCor * (ptStartArc.distanceTo(ptGeCen));
	return TRUE;
}

BOOL THImpHvacVRVBrPipe::GetIntersectWith(AcGePoint3d &pt1,AcGePoint3d &pt2,AcGeVector3d &vt1,AcGeVector3d &vt2,AcGePoint3d &ptIntersect) const
{
	AcGeLine3d line1,line2;
	line1.set(pt1,vt1);
	line2.set(pt2,vt2);
	return	line1.intersectWith(line2, ptIntersect);
}

void THImpHvacVRVBrPipe::DrawElbow(XExplodeDraw &mode) const
{
	AcGePoint3dArray arPts;
	if (!GetPts(arPts))
		return;
	
	double dDiameter = 50.0,dPlusEdge = 0.1;
	//int nSectType = 2;
	AcDbObjectId idLayer;
	//int nBaseLine = 1;
	//int nSingleLine = 0;
	int nSegments = 6;
	AcGePoint3d ptStart, ptCorner, ptEnd;
	//m_pXDataMap->GetAt(HELB_Segments, nSegments);
	//m_pXDataMap->GetAt(HVAC_SectType,nSectType);

	//BEGIN===================================================
	//m_pXDataMap->GetAt(HELB_Diameter, dDiameter);
	double dDiameterStart = 50.0;
	double dDiameterEnd = 50.0;
	
	ptStart = arPts[8];
	ptEnd = arPts[5];
	ptCorner = arPts[9];
	//m_pXDataMap->GetAt(HELB_StartPoint,ptStart);
	//m_pXDataMap->GetAt(HELB_CornerPoint,ptCorner);
	//m_pXDataMap->GetAt(HELB_EndPoint,ptEnd);
	//m_pXDataMap->GetAt(HVAC_HasBaseLine,nBaseLine);
	//m_pXDataMap->GetAt(HVAC_IsSingleLine,nSingleLine);
// 	m_pXDataMap->GetAt(HELB_Diameter, dDiameterStart);
// 	if (!m_pXDataMap->GetAt(HELB_EndDiameter, dDiameterEnd))
// 	{
// 		dDiameterEnd = dDiameterStart;
// 	}
	
// 	double dMaxWidth = dDiameterStart > dDiameterEnd ? dDiameterStart : dDiameterEnd;
// 
// 	if ((ptStart.distanceTo(ptCorner) - 50.0) - dMaxWidth / 2 < -1e-6)
// 	{
// 		dPlusEdge = 0.1;
// 	}

	dDiameterStart *= 0.5;
	dDiameterEnd *= 0.5;
	


	double dMinDiffAng = TAuxTools::GetMinDiffAngle();
	int nColumns = (int)(PI * 2 / dMinDiffAng);

	//计算半径偏移量
	double dDiameterOffset = dDiameterEnd - dDiameterStart;

	AcGePoint3d ptOnArc = ptCorner;
	AcGePoint3d ptStartArc = ptStart;
	AcGePoint3d ptEndArc = ptEnd;
	GetPtOnArcExt(ptStartArc, ptCorner, ptEndArc, ptCorner, ptOnArc, dPlusEdge);
	AcGeCircArc3d circleArc;
	circleArc.set(ptStartArc, ptOnArc, ptEndArc);
	AcGePoint3d ptCenterArc = circleArc.center();
	AcGeVector3d vtStartArc = ptStartArc - ptCenterArc;
	AcGeVector3d vtEndArc = ptEndArc - ptCenterArc;
	AcGeVector3d vtNormalArc = vtEndArc.crossProduct(vtStartArc);
	vtStartArc.normalize();
	vtEndArc.normalize();
	vtNormalArc.normalize();

	double dAngle = vtStartArc.angleTo(vtEndArc);
	double dSegAngle = dAngle / nSegments;

	//关键节点数组
	AcGePoint3dArray arptKeys;
	AcGePoint3d ptTemp;				//临时点值，用于插入关键节点数组时使用
	double dDiameterTemp = 50.0;	//临时半径值，用于临时存储环节半径

	//起始段
	AcGeVector3d vtAxisStart = ptStart - ptStartArc;

	//起始段前端
	for (int iStart = 0; iStart < nColumns; iStart++)
	{
		ptTemp = ptStart + dDiameterStart * vtStartArc;
		ptTemp.rotateBy(dMinDiffAng * iStart, vtAxisStart, ptStart);
		arptKeys.append(ptTemp);
	}
	
	ptTemp = ptStart + dDiameterStart * vtStartArc;
	arptKeys.append(ptTemp);

	//起始段后端
	for (int iStartArc = 0; iStartArc < nColumns; iStartArc++)
	{
		ptTemp = ptStartArc + dDiameterStart * vtStartArc;
		ptTemp.rotateBy(dMinDiffAng * iStartArc, vtAxisStart, ptStartArc);
		arptKeys.append(ptTemp);
	}
	
	ptTemp = ptStartArc + dDiameterStart * vtStartArc;
	arptKeys.append(ptTemp);

	//中间圆弧段
	for (int iArc = 1; iArc < nSegments; iArc++)
	{
		dDiameterTemp = dDiameterStart + dDiameterOffset * iArc / nSegments;
		AcGePoint3d ptStartArcTemp = ptStartArc;
		AcGePoint3d ptOnArcTemp = ptStartArcTemp.rotateBy(-dSegAngle * iArc, vtNormalArc, ptCenterArc);
		AcGeVector3d vtOnArcTemp = ptOnArcTemp - ptCenterArc;
		AcGeVector3d vtOnArcAxis = vtOnArcTemp;
		vtOnArcAxis.rotateBy(PI / 2, vtNormalArc);
		vtOnArcTemp.normalize();

		for (int i = 0; i < nColumns; i++)
		{
			ptTemp = ptOnArcTemp + dDiameterTemp * vtOnArcTemp;
			ptTemp.rotateBy(dMinDiffAng * i, vtOnArcAxis, ptOnArcTemp);
			arptKeys.append(ptTemp);
		}

		ptTemp = ptOnArcTemp + dDiameterTemp * vtOnArcTemp;
		arptKeys.append(ptTemp);
	}

	//末尾段
	AcGeVector3d vtAxisEnd = ptEndArc - ptEnd;

	//末尾段前端
	for (int iEndArc = 0; iEndArc < nColumns; iEndArc++)
	{
		ptTemp = ptEndArc + dDiameterEnd * vtEndArc;
		ptTemp.rotateBy(dMinDiffAng * iEndArc, vtAxisEnd, ptEndArc);
		arptKeys.append(ptTemp);
	}
	
	ptTemp = ptEndArc + dDiameterEnd * vtEndArc;
	arptKeys.append(ptTemp);
	
	//末尾段后端
	for (int iEnd = 0; iEnd < nColumns; iEnd++)
	{
		ptTemp = ptEnd + dDiameterEnd * vtEndArc;
		ptTemp.rotateBy(dMinDiffAng * iEnd, vtAxisEnd, ptEnd);
		arptKeys.append(ptTemp);
	}
	
	ptTemp = ptEnd + dDiameterEnd * vtEndArc;
	arptKeys.append(ptTemp);

	//生成三维网格
	mode.DrawMesh(nSegments + 3, nColumns + 1, arptKeys.asArrayPtr());

}

Acad::ErrorStatus THImpHvacVRVBrPipe::ExplodeOrDraw3d(XExplodeDraw &mode) const
{
	AcGePoint3dArray arpts;
	if(!GetPts(arpts))
		return Acad::eNotApplicable;
// 	XPoint p1 = arpts[1],p2 = arpts[4];
// 	XLine l1(p1,p2);
// 	mode.DrawLine(l1);
// 	p1 = arpts[5];
// 	p2 = arpts[6];
// 	l1.SetPoints(p1,p2);
// 	mode.DrawLine(l1);
	DrawElbow(mode);
	
	AcGePoint3d ptS = arpts[0];
	AcGePoint3d ptE = arpts[4];
	
	AcGeVector3d vtNormal = normal();
	AcGeVector3d vtDirect = ptE - ptS;
	vtDirect.normalize();
	
	double dMinAngle(TAuxTools::GetMinDiffAngle());
	int nPartNum = int(PI * 2 / dMinAngle);
	dMinAngle = PI * 2 / nPartNum;
	
	double dDiaMet(50.0);	
	AcGePoint3dArray ptArr;
	
	// 修改为，三维最外轮廓跟返回Polylinje一致
	//	AcGeVector3d vtNow = vtNormal * -1;					// 每组顶点法向
	AcGeVector3d vtNow = vtNormal.crossProduct(vtDirect);	// 每组顶点法向
	int i(0);
	for (i = 0; i < nPartNum * 2; i += 2)
	{
		ptArr.append(ptS + dDiaMet * 0.5 * vtNow);
		ptArr.append(ptE + dDiaMet * 0.5 * vtNow);
		vtNow.rotateBy(dMinAngle, vtDirect);
	}		
	
	// 单独设置末点，防止误差
	ptArr.append(ptArr.at(0));
	ptArr.append(ptArr.at(1));
	mode.DrawMesh(nPartNum + 1, 2, ptArr.asArrayPtr());

	ptArr.setLogicalLength(0);
	ptS = arpts[5];
	ptE = arpts[6];
	vtDirect = ptE - ptS;
	vtDirect.normalize();
	ptS = ptS - vtDirect * 25.0;
	ptE = ptE + vtDirect * 25.0;
	vtNow = vtNormal.crossProduct(vtDirect);
	for (i = 0; i < nPartNum * 2; i += 2)
	{
		ptArr.append(ptS + dDiaMet * 0.5 * vtNow);
		ptArr.append(ptE + dDiaMet * 0.5 * vtNow);
		vtNow.rotateBy(dMinAngle, vtDirect);
	}		
	
	// 单独设置末点，防止误差
	ptArr.append(ptArr.at(0));
	ptArr.append(ptArr.at(1));
	mode.DrawMesh(nPartNum + 1, 2, ptArr.asArrayPtr());

	return Acad::eOk;
}

AcGeVector3d THImpHvacVRVBrPipe::GetNormal() const
{
	ASSERT(NULL != m_pXDataMap);
	AcGeVector3d vtNor;
	m_pXDataMap->GetAt(HVAC_Normal, vtNor);
	return vtNor.normalize();
}

AcGeVector3d THImpHvacVRVBrPipe::GetVtMain() const
{
	ASSERT(NULL != m_pXDataMap);
	AcGeVector3d vtMain;
	m_pXDataMap->GetAt(HVRV_MainDir, vtMain);
	return vtMain.normalize();
}

double THImpHvacVRVBrPipe::GetLength() const
{
	ASSERT(NULL != m_pXDataMap);
	double dLength(300.0);
	m_pXDataMap->GetAt(HVRV_Length, dLength);
	return dLength;
}

CString THImpHvacVRVBrPipe::GetMediaPipeDn() const
{
	ASSERT(NULL != m_pXDataMap);
	CString sDn;
	m_pXDataMap->GetAt(HVRV_SMediaPipe, sDn);
	return sDn;
}

double THImpHvacVRVBrPipe::GetEndLineWidth() const
{
	BOOL bShow(FALSE);
	GetGlobalContext(HVAC_SHOWWIDTH, bShow);
	// add by hh 2011-01-05 从图纸中读取加粗标识 避免全局参数对不同的图纸间的影响
	TAuxTools::GetTHvacDataFromDwg(HVAC_SHOWWIDTH, bShow);

	if (!bShow)
		return 0.0;
	
	ASSERT(NULL != m_pXDataMap);
	double dWidth(0.0);
	m_pXDataMap->GetAt(HVAC_EndWidth, dWidth);
	return dWidth;
}

AcDbObjectId THImpHvacVRVBrPipe::GetEndLayer() const
{
	ASSERT(NULL != m_pXDataMap);
	AcDbObjectId idSideLayer(AcDbObjectId::kNull);
	m_pXDataMap->GetAt(HVAC_EndLayer, idSideLayer);
	return idSideLayer;
}

int THImpHvacVRVBrPipe::GetDrawType() const
{
	ASSERT(NULL != m_pXDataMap);
	int nDrawType(0);
	m_pXDataMap->GetAt(KEY_DrawType, nDrawType);//是否画实心
	return nDrawType;
}

Acad::ErrorStatus THImpHvacVRVBrPipe::ExplodeOrDraw2d(XExplodeDraw &mode) const
{
	AcGePoint3dArray arpts;
	if(!GetPts(arpts))
		return Acad::eNotApplicable;

	if (!IsSysMode())
	{
		AcGePlane plan(arpts[0], arpts[1], arpts[2]);
		AcGePoint3d ptOrth = AcGePoint3d::kOrigin.orthoProject(plan);
		plan.set(ptOrth, GetNormal());
		
		double dEl = ptOrth.asVector().length();
		if (ptOrth.asVector().angleTo(plan.normal()) > PI*0.5)
			dEl *= -1.0;
		
		AcDbPolyline pArrow;
		//画实心
		if (GetDrawType())
		{
			pArrow.addVertexAt(0, arpts[0].convert2d(plan));
			pArrow.addVertexAt(1, arpts[1].convert2d(plan));
			pArrow.setWidthsAt(0, 0, GetLength());
		}
		else
		{
			pArrow.addVertexAt(0, arpts[0].convert2d(plan));
			pArrow.addVertexAt(1, arpts[2].convert2d(plan));
			pArrow.addVertexAt(2, arpts[3].convert2d(plan));
			pArrow.setClosed(Adesk::kTrue);

			// 需求变更,三角形保持原样,两个引出管加粗Lixl add 2012/5/16
//			pArrow.addVertexAt(3, arpts[0].convert2d(plan));
			// TGGiWorldViewportDraw绘制PLINE线的时候,线宽需要考虑打印比例Lixl add 2012/5/3
// 			double dEndLineWidth = GetEndLineWidth();
// 			double dPScale = ((TDbInterfacesObj*)m_pOwnerEnt)->GetPrintScale();
// 			if (dPScale < 1.e-3) 
// 				dPScale = 1.0;
//  			pArrow.setWidthsAt(0, dEndLineWidth*dPScale, dEndLineWidth*dPScale);
// 			pArrow.setWidthsAt(1, dEndLineWidth*dPScale, dEndLineWidth*dPScale);
// 			pArrow.setWidthsAt(2, dEndLineWidth*dPScale, dEndLineWidth*dPScale);
			
		}
		pArrow.setElevation(dEl);
		mode.Polyline(pArrow);
	}
	else // 系统图绘制
	{
// 		TDbExtentsEdge edage;
// 		edage.SetEdage(cplCurve);
// 		
// 		AcDbObjectId idReal = ((TDbInterfacesObj*)m_pOwnerEnt)->layerId();
// 		AcDbObjectId idDash = ((TDbInterfacesObj*)m_pOwnerEnt)->DashLayer();
// 		AcDbObjectId idCent = ((TDbInterfacesObj*)m_pOwnerEnt)->CenterLayer();
// 		
// 		edage.ExplodeOrDraw2d(mode,idReal,idDash,idCent,NULL,FALSE,FALSE);
	}

	return Acad::eOk;	
}

XPoint THImpHvacVRVBrPipe::TransformPoint(const XPoint& point, double angle, const XPoint& basePoint) const
{
	XPoint pt = point- basePoint;// 
	XPoint ptN(pt.x + cos(angle) * pt.y, pt.z + sin(angle) * pt.y, point.z);
	return ptN;
}

void THImpHvacVRVBrPipe::TransformVecor(CString sAngle, AcGeVector3d& vt) const
{
	double dAngle = _tstof(sAngle) * PI / 180;
	vt.set(vt.x + cos(dAngle) * vt.y, vt.z + sin(dAngle) * vt.y, 0);
	//vt.normalize();
}

void THImpHvacVRVBrPipe::list() const
{
	if (m_pXDataMap != NULL)
	{
		AcGePoint3d ptCenter;
		AcGeVector3d vtMain;
		CString sType,sName,sParma;
		double dLength(50.0), dThick(50.0), dWidth(50.0), dPlusEdge(50.0);
		double daircap(0),drefri(0),dheatcap(0),dwtrRes(0);
		TDbXDataMap mapparam;
// 		m_pXDataMap->GetAt(HVRV_SFactory, sType);
// 		m_pXDataMap->GetAt(HVRV_SEquipName, sName);
		m_pXDataMap->GetAt(HVRV_CenterPoint, ptCenter);
		m_pXDataMap->GetAt(HVRV_MainDir, vtMain);
		m_pXDataMap->GetAt(HVRV_Length, dLength);		
		m_pXDataMap->GetAt(HVRV_Width, dWidth);		
		m_pXDataMap->GetAt(HVRV_Thick,	dThick);
		
		acutPrintf(_T("\t\t\t\t\t\t\t\t%s"),sType);
		acutPrintf(_T("\n\t\t\t\t\t型号: %s"),sName);
		//读出所有参数信息
		m_pXDataMap->GetAt(HVRV_Parameter,0,mapparam);
		TDbXDataMap::It it;
		TXData xdata;
		for(it = mapparam.Begin();it != mapparam.End();)
		{
			m_pXDataMap->GetAt(it->first, sParma);
			mapparam.GetNext(it,xdata);
			acutPrintf(_T("\n\t\t\t\t\t%s%s"),xdata.pszVal,sParma);
		}
		//几何参数信息
		acutPrintf(_T("\n\t\t\t\t\t长度: %.0fmm"),fabs(dLength));
		acutPrintf(_T("\n\t\t\t\t\t宽度: %.0fmm"),fabs(dWidth));
		acutPrintf(_T("\n\t\t\t\t\t高度: %.0fmm"),fabs(dThick));
		acutPrintf(_T("\n\t\t\t\t\t标高: %.0fm"),ptCenter.z * 0.001);
		int icount(0);
		m_pXDataMap->GetAt(HVRV_InterfaceNum, icount);
		if (icount < 1)
		{
			acutPrintf(_T("\n\t\t\t\t\t接口:无"));
		}
	}
}

BOOL THImpHvacVRVBrPipe::IsSysMode() const
{
	if (m_pXDataMap == NULL)
		return FALSE;

	HvacModelType eType = eModel;
	m_pXDataMap->GetAt(HVAC_ModeType, (int&)eType);
	if (eType != eSystem)
		return FALSE;

	return TRUE;
}

Acad::ErrorStatus THImpHvacVRVBrPipe::transformBy(const AcGeMatrix3d& xform)
{
	if (NULL == m_pXDataMap)
		return Acad::eNotApplicable;

	// 取得位置点
	AcGePoint3d ptCenter;
	AcGeVector3d vtMain,vtNor;
	double dL(1.0),dW(1.0),dT(1.0);
	m_pXDataMap->GetAt(HVRV_CenterPoint, ptCenter);
	m_pXDataMap->GetAt(HVRV_MainDir, vtMain);
	m_pXDataMap->GetAt(HVRV_Length, dL);
	m_pXDataMap->GetAt(HVRV_Width, dW);
	m_pXDataMap->GetAt(HVRV_Thick, dT);
	m_pXDataMap->GetAt(HVAC_Normal, vtNor);
	AcGeVector3d vtPrep(vtNor.crossProduct(vtMain));
	
 	// 变换位置
	vtNor.transformBy(xform);
	ptCenter.transformBy(xform);
	vtMain.transformBy(xform);
	vtPrep.transformBy(xform);

	// 同向是旋转，不变号，反向是镜像，变号。
	int iSign = ((vtPrep.isCodirectionalTo(vtNor.crossProduct(vtMain))) ? 1 : -1);

	// 更新点
	m_pXDataMap->SetAt(HVAC_Normal, vtNor);
	m_pXDataMap->SetAt(HVRV_CenterPoint, ptCenter);
	m_pXDataMap->SetAt(HVRV_MainDir, vtMain);
	int nIsConverse(0); 
	m_pXDataMap->GetAt(HVRV_IsConverse, nIsConverse);

	if (iSign < 0)
	{
		if (nIsConverse)
		{
			m_pXDataMap->SetAt(HVRV_IsConverse, 0);
		}
		else
			m_pXDataMap->SetAt(HVRV_IsConverse, 1);
	}
	
	// 传递消息
	if (m_pOwnerEnt != NULL && m_pOwnerEnt->objectId().isValid())
	{
		// 如果实体不是在当前模型空间中,不做写消息,更新接口处理
		AcDbDatabase* pDb = m_pOwnerEnt->database();
		if (pDb == NULL) pDb = acdbCurDwg();
		
		AcDbObjectId idModel;
		AcDbBlockTable* pTable = NULL;
		pDb->getBlockTable(pTable, AcDb::kForRead);
		if (pTable != NULL)
		{
			pTable->getAt(ACDB_MODEL_SPACE, idModel);
			pTable->close();
		}
		
		// 如果实体不是在当前模型空间中,不做写消息,更新接口处理
		if (idModel == m_pOwnerEnt->blockId())
		{
			TInterfaceModifyMsg iMsg;
			iMsg.SetInterfaceOper(TDb::eTransformBy);
			iMsg.SetMsgValidate(TRUE);
			iMsg.SetTransform(xform);
			iMsg.SetMsgOperateOn(m_pOwnerEnt->objectId());
			
			TDbInterfaceMsgWrite msgWrite;
			msgWrite.WriteInterfaceMsg(iMsg);
			
			//更新接口记录接口信息
			UpdateInterfaceRec(m_pOwnerEnt->objectId(), xform);
		}
	}

	return Acad::eOk;
}

Acad::ErrorStatus THImpHvacVRVBrPipe::getStretchPoints(AcGePoint3dArray& stretchPoints) const
{
	if (NULL == m_pXDataMap)
		return Acad::eNotApplicable;

	// 取得位置点
	AcGePoint3d ptCenter;
	m_pXDataMap->GetAt(HVRV_CenterPoint, ptCenter);

	stretchPoints.append(ptCenter);
	return Acad::eOk;
}

Acad::ErrorStatus THImpHvacVRVBrPipe::moveStretchPointsAt(const AcDbIntArray& indices,
													  const AcGeVector3d& offset)
{
	return moveGripPointsAt(indices,offset);
}

Acad::ErrorStatus THImpHvacVRVBrPipe::moveGripPointsAt(const AcDbIntArray& indices,
                                   const AcGeVector3d& offset)
{
	ASSERT(NULL != m_pXDataMap);
	
	int nSize = indices.length();
	if (nSize > 0)
	{
		// 取得位置点
		AcGePoint3d ptCenter;
		m_pXDataMap->GetAt(HVRV_CenterPoint, ptCenter);
		AcGeVector3d vtMain,vtMainv;
		m_pXDataMap->GetAt(HVRV_MainDir, vtMain);
		// 选择多个夹点,以first为准
		int nIndex = indices.first();
		TDb::Position ePos = ExplainGripIndex(nIndex);
		switch(ePos)
		{
		case TDb::eMid:
			{
				TDb::InterfaceOper eOper = TDb::eMoveGripPoint;
				AcGeVector3d vtMove = offset;
				
				ptCenter += vtMove;
				m_pXDataMap->SetAt(HVRV_CenterPoint, ptCenter);

				if (m_pOwnerEnt != NULL && m_pOwnerEnt->objectId().isValid())
				{
					// 写入接口更改消息
					TInterfaceModifyMsg iMsg;
					iMsg.SetMsgPoint(ptCenter);//new pos
					iMsg.SetGripPosition(TDb::eMid);
					iMsg.SetMoveGripOffset(vtMove);
					if (eOper == TDb::eTransformBy)
						iMsg.SetTransform(vtMove);
					iMsg.SetMsgValidate(TRUE);
					iMsg.SetInterfaceOper(eOper);
					iMsg.SetMsgOperateOn(m_pOwnerEnt->objectId());
					TDbInterfaceMsgWrite msgWrite;
					msgWrite.WriteInterfaceMsg(iMsg);
					
					//更新接口记录接口信息
					AcGeMatrix3d xform;
					xform.setToTranslation(vtMove);
					UpdateInterfaceRec(m_pOwnerEnt->objectId(),xform);
				}
				break;
			}
		case TDb::eCommand0:
			{
				AcGePoint3dArray arpts;
				if (!GetPts(arpts))
					return Acad::eNotApplicable;
				AcGePoint3d ptCom;
				if (nIndex == 1)
				{
					ptCom = arpts[0];
				}
				else if (nIndex == 2)
				{
					ptCom = arpts[4];
				}
				else if (nIndex == 3)
				{
					ptCom = arpts[6];
				}
				CString sCmdStr;
				GetGlobalContext()->GetAt(KEY_HVACMEDIAGRIPCMD, sCmdStr);
		    	if (sCmdStr.IsEmpty())
			    	return Acad::eNotApplicable;

				// 写入接口更改消息
				TInterfaceModifyMsg iMsg;
				iMsg.SetMsgPoint(ptCom);//new pos
				iMsg.SetGripPosition(ePos);
				iMsg.SetMoveGripOffset(offset);
				iMsg.SetMsgValidate(TRUE);
				iMsg.SetInterfaceOper(TDb::eNewCommand);
				iMsg.SetPreviewObjToCreate(TDb::eVRVBrPipe, 0);
				
				AcDbSoftPointerId idOwner;
				m_pXDataMap->GetAt(KEY_THISID,idOwner);
				iMsg.SetMsgOperateOn(idOwner);
				TDbInterfaceMsgWrite msgWrite;
				msgWrite.WriteInterfaceMsg(iMsg);
				
				// 发送消息
				acedPostCommand(_T("\33"));
				acedPostCommand(sCmdStr + _T("\n"));
				break;
			}
		default:
			break;
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus THImpHvacVRVBrPipe::getOsnapPoints(AcDb::OsnapMode osnapMode,
                                 INT_PTR gsSelectionMark,
                                 const AcGePoint3d& pickPoint,
                                 const AcGePoint3d& lastPoint,
                                 const AcGeMatrix3d& viewXform,
                                 AcGePoint3dArray& snapPoints,
                                 AcDbIntArray& geomIds) const
{
	AcGePoint3dArray arpts;
	if (!GetPts(arpts))
		return Acad::eNotApplicable;
 	
	// 根据捕捉模式处理
	switch(osnapMode)
	{
	case AcDb::kOsModeEnd:
		snapPoints.append(arpts[4]);
		snapPoints.append(arpts[6]);
		break;
	case AcDb::kOsModeCen:
		snapPoints.append(arpts[0]);
		break;
	case AcDb::kOsModeMid:
		break;
	case AcDb::kOsModePerp:
		break;
	case AcDb::kOsModeNear:
		break;
	}
	return Acad::eOk;
}

Acad::ErrorStatus THImpHvacVRVBrPipe::getGripPoints(AcGePoint3dArray& gripPoints,
                                AcDbIntArray& osnapModes,
                                AcDbIntArray& geomIds) const
{
	AcGePoint3dArray arpts;
	if (!GetPts(arpts))
		return Acad::eNotApplicable;
	//移动夹点
	gripPoints.append(arpts[0]);
	//命令夹点
	gripPoints.append(arpts[7]);
	gripPoints.append(arpts[4]);
	gripPoints.append(arpts[6]);
	return Acad::eOk;
}

Acad::ErrorStatus THImpHvacVRVBrPipe::getClassID(CLSID* pClsid) const
{
// #if (ADS < 16)
// 	// {C7DFDF6A-A5F2-4add-ADCC-7AC0675AB6E8}
// 	CLSID CLSID_PipeBaseEntity = {0xC7DFDF6B, 0xA5F2, 0x4ADE, { 0xAD, 0xCC, 0x7A, 0xC0, 0x67, 0x5A, 0xB6, 0xE8 }};
// #endif
// 
// #if (ADS == 16)
// 	// {C7DFDF6A-A5F2-4add-ADCC-7AC0675AB6E9}
// 	CLSID CLSID_PipeBaseEntity = {0xC7DFDF6B, 0xA5F2, 0x4ADE, { 0xAD, 0xCC, 0x7A, 0xC0, 0x67, 0x5A, 0xB6, 0xE9 }};
// #endif
// 
// #if (ADS == 17)
// 	// {C7DFDF6A-A5F2-4add-ADCC-7AC0675AB6EA}
// 	CLSID CLSID_PipeBaseEntity = {0xC7DFDF6B, 0xA5F2, 0x4ADE, { 0xAD, 0xCC, 0x7A, 0xC0, 0x67, 0x5A, 0xB6, 0xEA }};
// #endif
// 
// #if (ADS == 18)
// 	CLSID CLSID_PipeBaseEntity = {0xD7DFDF6B, 0xA5F2, 0x4ADE, { 0xAD, 0xCC, 0x7A, 0xC0, 0x67, 0x5A, 0xB6, 0xEB }};
// #endif
// 
// #if (ADS == 19)
// 	CLSID CLSID_PipeBaseEntity = {0xD7DFDF6B, 0xA5F2, 0x4ADE, { 0xAD, 0xCC, 0x7A, 0xC0, 0x67, 0x5A, 0xB6, 0xEB }};
// #endif

	return Acad::eOk;
}

BOOL THImpHvacVRVBrPipe::OPMInfo(LPCTSTR pszName, TDb::OPMInfo* pInfo)
{
	ASSERT(NULL != pszName && NULL != pInfo && NULL != m_pXDataMap);
	// 暖通基本参数设置
	if (0 == _tcsicmp(pszName, KEY_RUNTIME))
	{
		pInfo->bVisible = TRUE;
		pInfo->bEditable = FALSE;

		// 提供数据列表和对应关系
		if (NULL != pInfo->parsValues && NULL != pInfo->parlValues)
		{
			pInfo->parsValues->Add(_T("分歧管"));
			pInfo->parlValues->Add(TDb::eVRVBrPipe);
		}
		return TRUE;
	}

	if (0 == _tcsicmp(pszName, KEY_Model))
	{
		pInfo->bVisible = TRUE;
		pInfo->bEditable = TRUE;
		return TRUE;
	}

	if (0 == _tcsicmp(pszName, KEY_StartPoint))
	{
		pInfo->bVisible = TRUE;
		pInfo->bEditable = TRUE;

		// 整体移动
		if (NULL != pInfo->pXData && 0 != pInfo->pXData->nVt)
		{
			// 改变顶点变换行为
			AcGePoint3d pt;
			m_pXDataMap->GetAt(KEY_StartPoint, pt);
			AcGeVector3d offset = asPnt3d(pInfo->pXData->dVal) - pt;
			
			AcGeMatrix3d mat;
			mat.setToTranslation(offset);
			transformBy(mat);
			pInfo->pXData->nVt = 0;	// 设置处理完成标识
			//TAuxTools::SetAndUpdateCover((TDbInterfacesObj*)m_pOwnerEnt, pszName, pInfo);
		}

		return TRUE;
	}

	// 多联机样式 为了注册列表名，保证其他管件能用到此参数
	if (0 == _tcsicmp(pszName, HVRV_IType))
	{
		pInfo->bVisible = FALSE;
		pInfo->bEditable = FALSE;

		// 提供数据列表和对应关系
		if (NULL != pInfo->parsValues && NULL != pInfo->parlValues)
		{
  			pInfo->parlValues->Add(0);
			pInfo->parsValues->Add(_T("室内机"));
  			pInfo->parlValues->Add(1);
			pInfo->parsValues->Add(_T("室外机"));
		}

		return TRUE;
	}

	return FALSE;
}

// 导出XML
// CString THImpHvacVRVBrPipe::GetXml() const
// {
// 	if (NULL == m_pXDataMap || NULL == m_pOwnerEnt)
// 		return _T("");
// 
// 	int nValue(0);
// 	double dValue(0.0);
// 	int nPtPreci = 6; // 位置精度
// 	int nWhPreci = 0; // 宽度、高度精度
// 
// 	TXmlTree xmlTree;
// 	CString csText;
// 	CString csX, csY, csZ;
// 	AcGePoint3d pt;
// 	AcGeVector3d vt;
// 	POSITION posRoot = xmlTree.Insert(_T("ATS_DBHEQUIPMENT"), NULL, NULL);
// 	{
// 		xmlTree.SetAttribute(posRoot, _T("name"), _T("分歧管"));
// 		xmlTree.SetAttribute(posRoot, _T("comment"), _T("上华对象名称"));
// 	}
// 
// 	POSITION posItemNorDir = xmlTree.Insert(_T("NormalDir"),posRoot, NULL);
// 	{
// 		xmlTree.SetAttribute(posItemNorDir, _T("name"), _T("法向量"));
// 		m_pXDataMap->GetAt(HVAC_Normal, vt);
// 		TAuxTools::DoubleToString(vt.x, nPtPreci, csX);
// 		TAuxTools::DoubleToString(vt.y, nPtPreci, csY);
// 		TAuxTools::DoubleToString(vt.z, nPtPreci, csZ);
// 		csText.Format(_T("%s,%s,%s"), csX, csY, csZ);
// 		xmlTree.SetItemText(posItemNorDir, csText);
// 	}
// 
// 	POSITION posItemCentPt = xmlTree.Insert(_T("CenterPoint"), posRoot, posItemNorDir);
// 	{ 
// 		xmlTree.SetAttribute(posItemCentPt, _T("name"), _T("中心点"));
// 		xmlTree.SetAttribute(posItemCentPt, _T("comment"), _T("布置点"));
// 		m_pXDataMap->GetAt(HVRV_CenterPoint, pt);
// 		TAuxTools::DoubleToString(pt.x, nPtPreci, csX);
// 		TAuxTools::DoubleToString(pt.y, nPtPreci, csY);
// 		TAuxTools::DoubleToString(pt.z, nPtPreci, csZ);
// 		csText.Format(_T("%s,%s,%s"), csX, csY, csZ);
// 		xmlTree.SetItemText(posItemCentPt, csText);
// 	}
// 
// 	POSITION posItemMainDir = xmlTree.Insert(_T("MainDir"), posRoot, posItemCentPt);
// 	{ 
// 		xmlTree.SetAttribute(posItemMainDir, _T("name"), _T("主矢量"));
// 		xmlTree.SetAttribute(posItemMainDir, _T("comment"), _T("布置角度"));
// 		m_pXDataMap->GetAt(HVRV_MainDir, vt);
// 		TAuxTools::DoubleToString(vt.x, nPtPreci, csX);
// 		TAuxTools::DoubleToString(vt.y, nPtPreci, csY);
// 		TAuxTools::DoubleToString(vt.z, nPtPreci, csZ);
// 		csText.Format(_T("%s,%s,%s"), csX, csY, csZ);
// 		xmlTree.SetItemText(posItemMainDir, csText);
// 	}
// 
// 	POSITION posItemBsPtIdx = xmlTree.Insert(_T("BasePtIndex"), posRoot, posItemMainDir);
// 	{ 
// 		xmlTree.SetAttribute(posItemBsPtIdx, _T("name"), _T("基点索引"));
// 		xmlTree.SetAttribute(posItemBsPtIdx, _T("comment"), _T("基点索引号"));
// 		m_pXDataMap->GetAt(KEY_SectType, nValue);
// 		csText.Format(_T("%d"), nValue);
// 		xmlTree.SetItemText(posItemBsPtIdx, csText);
// 	}
// 
// 	POSITION posItemReverse = xmlTree.Insert(_T("IsReverse"), posRoot, posItemBsPtIdx);
// 	{ 
// 		xmlTree.SetAttribute(posItemReverse, _T("name"), _T("是否反向"));
// 		xmlTree.SetAttribute(posItemReverse, _T("comment"), _T("用于辅助绘制0:否,1:是"));
// 		m_pXDataMap->GetAt(HVRV_IsConverse, nValue);
// 		csText.Format(_T("%d"), nValue);
// 		xmlTree.SetItemText(posItemReverse, csText);
// 	}
// 
// 	POSITION posItemLength = xmlTree.Insert(_T("Length"), posRoot, posItemReverse);
// 	{ 
// 		xmlTree.SetAttribute(posItemLength, _T("name"), _T("长度"));
// 		xmlTree.SetAttribute(posItemLength, _T("comment"), _T("设备长度"));
// 		m_pXDataMap->GetAt(HVRV_Length, dValue);
// 		TAuxTools::DoubleToString(dValue, nWhPreci, csText);
// 		xmlTree.SetItemText(posItemLength, csText);
// 	}
// 
// 	POSITION posItemWidth = xmlTree.Insert(_T("Width"), posRoot, posItemLength);
// 	{ 
// 		xmlTree.SetAttribute(posItemWidth, _T("name"), _T("宽度"));
// 		xmlTree.SetAttribute(posItemWidth, _T("comment"), _T("设备宽度"));
// 		m_pXDataMap->GetAt(HVRV_Width, dValue);
// 		TAuxTools::DoubleToString(dValue, nWhPreci, csText);
// 		xmlTree.SetItemText(posItemWidth, csText);
// 	}
// 
// 	CString csXml = xmlTree.GetXml();
// 
// 	return csXml;
// }

CString THImpHvacVRVBrPipe::GetXml(const AcGeMatrix3d& mat) const
{
	if (NULL == m_pXDataMap || NULL == m_pOwnerEnt)
		return _T("");

	int nValue(0);
	double dValue(0.0);
	int nPtPreci = 6; // 位置精度
	int nWhPreci = 0; // 宽度、高度精度

	TXmlTree xmlTree;
	CString csText;
	CString csX, csY, csZ;
	AcGePoint3d pt;
	AcGeVector3d vt;
	POSITION posRoot = xmlTree.Insert(_T("ATS_DBHEQUIPMENT"), NULL, NULL);
	{
		xmlTree.SetAttribute(posRoot, _T("name"), _T("分歧管"));
		xmlTree.SetAttribute(posRoot, _T("comment"), _T("上华对象名称"));
	}

	POSITION posItemNorDir = xmlTree.Insert(_T("NormalDir"),posRoot, NULL);
	{
		xmlTree.SetAttribute(posItemNorDir, _T("name"), _T("法向量"));
		m_pXDataMap->GetAt(HVAC_Normal, vt);
		TAuxTools::DoubleToString(vt.x, nPtPreci, csX);
		TAuxTools::DoubleToString(vt.y, nPtPreci, csY);
		TAuxTools::DoubleToString(vt.z, nPtPreci, csZ);
		csText.Format(_T("%s,%s,%s"), csX, csY, csZ);
		xmlTree.SetItemText(posItemNorDir, csText);
	}

	POSITION posItemCentPt = xmlTree.Insert(_T("CenterPoint"), posRoot, posItemNorDir);
	{ 
		xmlTree.SetAttribute(posItemCentPt, _T("name"), _T("中心点"));
		xmlTree.SetAttribute(posItemCentPt, _T("comment"), _T("布置点"));
		m_pXDataMap->GetAt(HVRV_CenterPoint, pt);
		pt.transformBy(mat);
		TAuxTools::DoubleToString(pt.x, nPtPreci, csX);
		TAuxTools::DoubleToString(pt.y, nPtPreci, csY);
		TAuxTools::DoubleToString(pt.z, nPtPreci, csZ);
		csText.Format(_T("%s,%s,%s"), csX, csY, csZ);
		xmlTree.SetItemText(posItemCentPt, csText);
	}

	POSITION posItemMainDir = xmlTree.Insert(_T("MainDir"), posRoot, posItemCentPt);
	{ 
		xmlTree.SetAttribute(posItemMainDir, _T("name"), _T("主矢量"));
		xmlTree.SetAttribute(posItemMainDir, _T("comment"), _T("布置角度"));
		m_pXDataMap->GetAt(HVRV_MainDir, vt);
		TAuxTools::DoubleToString(vt.x, nPtPreci, csX);
		TAuxTools::DoubleToString(vt.y, nPtPreci, csY);
		TAuxTools::DoubleToString(vt.z, nPtPreci, csZ);
		csText.Format(_T("%s,%s,%s"), csX, csY, csZ);
		xmlTree.SetItemText(posItemMainDir, csText);
	}

	POSITION posItemBsPtIdx = xmlTree.Insert(_T("BasePtIndex"), posRoot, posItemMainDir);
	{ 
		xmlTree.SetAttribute(posItemBsPtIdx, _T("name"), _T("基点索引"));
		xmlTree.SetAttribute(posItemBsPtIdx, _T("comment"), _T("基点索引号"));
		m_pXDataMap->GetAt(KEY_SectType, nValue);
		csText.Format(_T("%d"), nValue);
		xmlTree.SetItemText(posItemBsPtIdx, csText);
	}

	POSITION posItemReverse = xmlTree.Insert(_T("IsReverse"), posRoot, posItemBsPtIdx);
	{ 
		xmlTree.SetAttribute(posItemReverse, _T("name"), _T("是否反向"));
		xmlTree.SetAttribute(posItemReverse, _T("comment"), _T("用于辅助绘制0:否,1:是"));
		m_pXDataMap->GetAt(HVRV_IsConverse, nValue);
		csText.Format(_T("%d"), nValue);
		xmlTree.SetItemText(posItemReverse, csText);
	}

	POSITION posItemLength = xmlTree.Insert(_T("Length"), posRoot, posItemReverse);
	{ 
		xmlTree.SetAttribute(posItemLength, _T("name"), _T("长度"));
		xmlTree.SetAttribute(posItemLength, _T("comment"), _T("设备长度"));
		m_pXDataMap->GetAt(HVRV_Length, dValue);
		TAuxTools::DoubleToString(dValue, nWhPreci, csText);
		xmlTree.SetItemText(posItemLength, csText);
	}

	POSITION posItemWidth = xmlTree.Insert(_T("Width"), posRoot, posItemLength);
	{ 
		xmlTree.SetAttribute(posItemWidth, _T("name"), _T("宽度"));
		xmlTree.SetAttribute(posItemWidth, _T("comment"), _T("设备宽度"));
		m_pXDataMap->GetAt(HVRV_Width, dValue);
		TAuxTools::DoubleToString(dValue, nWhPreci, csText);
		xmlTree.SetItemText(posItemWidth, csText);
	}

	CString csXml = xmlTree.GetXml();

	return csXml;
}