envi-code/SourceCode/Code2026/tg_shs/shs_annotate/SymbolAnnotateJig.h

#ifndef _SYMBOLANNOTATE_JIG_H_
#define _SYMBOLANNOTATE_JIG_H_
#include "EdJigEx.h"
#include "ElevDlg.h"
#include "IndexDimDlg.h"
#include "LeaderTextDlg.h"
#include "coorddlg.h"
#include "SectionDlg.h"


//以下类是从EditSymbolAnnotate.cpp文件中分离出来 by lgy 20120109
extern TARCH_IMPEXP int g_bTextAdjust;
//extern AcDbObjectId InitTextStyle(const TCHAR *pszStyle);
extern GEOAPI int DragPickSet(PickSet &ss, XPoint &ptBase);
//extern TARCH_IMPEXP int DragMovePickSet(PickSet &ss, const TCHAR *pszPrompt, const XPoint &ptBase, XPoint &ptFinal);
extern int TARCH_IMPEXP g_nSymbArrowStyle; // sg add 090119，JIG过程中支持预览箭头样式

extern XPoint pptfirst;
static double sAngle;

extern XPoint pptfirst_; // [11/12/2007 nsh]
extern double sAngle_;





// Command:作法标注
class TComposingEdJig : public TSymbEdJig {
public:
	enum TComposingOper {kNone=0, kTextLine=1, kTurnPoint=2,};
protected:
	TComposingOper m_nOperCode;

	// I/O
	TDbSymbComposing *m_pDrawEnt;
public:
	TComposingEdJig(TDbSymbComposing *);
	virtual int DoIt(int *pKeyIndex=NULL);
	DragStatus GetPoint(XPoint &pt);
protected:
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
public:
	void SetOperCode(TComposingEdJig::TComposingOper opCode) {
		m_nOperCode=opCode;
	}
};





// add by xly on 100916 有圆点时的jig方式
class TComposingAddOtherPtJig : public TSymbEdJig
{
public:
	TComposingAddOtherPtJig(XPoint ptStart, XPoint ptBase); 

public:
	AcGePoint3d	m_ptLeader;			// 引线的拐点
	AcGePoint3d	m_ptFirstVertexes;  // 引线的端点
	AcDbLine	m_line;				// 引线

public:
	int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(AcGePoint3d &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
};





// Command: 指向索引
class TIndexPointerEdJig : public TSymbEdJig
{
public:
	enum TIndexOper {
		kNone = 0,
		kSourceExtent = 1,
		kTurnPoint = 2,
		kTextBasePoint = 3,
		kViewDirection = 4,
		kAddedTurn = 5,			// 剖切线中多出来的那个点
		kMoreCuts = 6,				// 其他剖切点
	};

	double m_dFixAngle;		// add by cwk on 060706，固定角度值
	bool m_bFixAngle;

protected:
	TIndexOper m_nOperCode;

	TDbSymbIndexPointer *m_pDrawEnt; // I/O
	AcDbCircle m_drawEnt;

	CArray<XLine, XLine&> m_arCutAdded;
	XLine m_cutCurrDrag;

	CIndexDimDlg *m_pDlg; // 

public:
	TIndexPointerEdJig(TDbSymbIndexPointer *);
	int DoIt(int *pKeyIndex = NULL);
	void AttachDlg(CIndexDimDlg* pDlg) {m_pDlg = pDlg;}
	// 根据索引初始化索引线
	void InitCutLine();

protected:
	virtual AcEdJig::DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

public:
	void SetOperCode(TIndexPointerEdJig::TIndexOper opCode) {
		m_nOperCode = opCode;
	}
};





// Add by lcf on 2005-06-24
/////////////////////////////////////////////////////////////
// Command:箭头引注
class TArrowEdJig : public TSymbEdJig
{
public:
	enum TArrowOper {kNone=0, kLinePoint=1, kArcPoint=2, kArcMidPoint=3, kArcRadius=4};

protected:
	TArrowOper m_nOperCode;
	TDbSymbArrow *m_pDrawEnt;
	BOOL m_bFirst;

public:
	TArrowEdJig(TDbSymbArrow *);
	virtual int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);

protected:
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

public:
	void SetOperCode(TArrowEdJig::TArrowOper opCode) { m_nOperCode = opCode; }
	TArrowOper GetOperCode() {return m_nOperCode;}
};





//////////////////////////////////////////////////////////////////////////
// 坐标标注
//  [10/22/2007 nsh]
static CString  dAngle;  // 保存角度
static XPoint savePoint; // 保存第一点的坐标
// --end--

class TCoordEdJig : public TSymbEdJig
{
protected:
	// I/O
	TDbSymbCoord *m_pDrawEnt;

public:
	TCoordEdJig(TDbSymbCoord *);
	virtual int DoIt();
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

public:
	//  [10/19/2007 nsh]
	double	m_dFixAngle; // 得到固定的角度值
	BOOL	m_bFixAngle; // 判断时候选定了固定角度的选项
	// --end--

	XPoint	m_saveFirstPt; // sg add 120618，记忆第1点坐标，主要为了接收外面传过来的值，给savePoint赋值
};





// Add by lcf 2005-06-30
// 图名标注
class TDrawingNameJig : public AcEdJig
{
public:
	TDrawingNameJig(TDbDrawingName *pEnt);

	int start(int *pKeyIndex = NULL);
	AcDbEntity* entity() const;
	DragStatus sampler();
	Adesk::Boolean update();
	void SetPrompt(const TCHAR *pszPrompt);
	void SetKeyword(const TCHAR *pszKeyword);

private:
	const TCHAR *m_pszPrompt;	//提示信息
	const TCHAR *m_pszKeyword;	//关键字
	TDbDrawingName *m_pDrawEnt;	//临时实体
	AcGePoint3d m_ptIns;
};





class TLeaderEdJig : public TSymbEdJig
{
public:
	enum TLeaderOper { kNone=0, kLeader=1, kTextLine=2, kVertex=3, };

	// add by cwk
	double m_dFixAngle;
	BOOL m_bFixAngle;

protected:
	// 输入
	TLeaderEdJig::TLeaderOper m_nOperCode;

	// I/O
	TDbSymbMultiLeader *m_pDrawEnt;

public:
	TLeaderEdJig(TDbSymbMultiLeader *);
	int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
	XPoint GetDragPoint() const;
	XPoint GetBasePoint() const;
	
	//add by lgy 20120206	引出标注角度固定角度不起作用
	void SetDlg(CLeaderDlg *pLeadDlg);
	CLeaderDlg *m_pDlg;
public:
	void SetOperCode(TLeaderEdJig::TLeaderOper nCode)
	{
		m_nOperCode = nCode;
	}
};





// sg add 090330，引出标注，添加其他点时使用
class TLeaderAddOtherPtJig : public TSymbEdJig
{
public:
	AcGePoint3d	m_ptLeader;
	AcGePoint3d	m_ptFirstVertexes;
	AcDbLine	m_line;

	BOOL m_bUpdateDlg; // 兼顾对象编辑和绘制对话框，标志是否时时获取对话框上的“多点共线”
	CLeaderDlg	*m_pDlg;
	BOOL m_bAllOnLine;

	double m_nLayoutRotation;//引线平行 add by lxb on 111229
	BOOL m_bLeaderParall;  //对象编辑时，对象是否带有引线平行属性

public:
	TLeaderAddOtherPtJig(CLeaderDlg *pDlg, XPoint ptStart, XPoint ptBase,double dLayoutRotation); // 绘制函数调用
	TLeaderAddOtherPtJig(BOOL bAllPtsOnLine, XPoint ptStart, XPoint ptBase,double dLayoutRotation,BOOL b); // 对象编辑调用

	int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
};





//绘制索引编号的JIG类TDrawingIndexEdJig
//add by lxb on 2011/12/21
class TDrawingIndexEdJig:public AcEdJig
{
public:
	TDrawingIndexEdJig(TDbSymbDrawingIndex *pEnt,TCHAR *pszPormat,TCHAR *pszKeyWord);
	~TDrawingIndexEdJig();

	virtual AcEdJig::DragStatus sampler();
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

	AcEdJig::DragStatus doIt();
private:
	TDbSymbDrawingIndex *m_pEnt;
	AcGePoint3d m_ptCur;        //鼠标当前坐标
	AcGePoint3d m_ptLast;
	TCHAR *m_pszPormat;         //提示语
	TCHAR *m_pszKeyWord;
};





class TElevEdJig : public TSymbEdJig 
{
public:
	enum TElevOper { kNone=0, kDirection=1, kBaseLine=2, kLeader=3, kMove=4};
	double m_dPointX;
	AcGePoint3d m_ptBase;
	double m_fBaseElev; // M

protected:
	// 输入
	TElevEdJig::TElevOper m_nOperCode;
	// I/O
	TDbSymbElevation *m_pDrawEnt;

public:
	TElevEdJig(TDbSymbElevation *);
	virtual int DoIt(int *pKeyIndex=NULL);
	virtual DragStatus GetPoint(XPoint &pt);

	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
	XPoint GetDragPoint() const;
	XPoint GetBasePoint() const;

public:
	void SetOperCode(TElevEdJig::TElevOper nCode) {
		m_nOperCode = nCode;
	}
};





// 指北针
class TNorthThumbEdJig : public TSymbEdJig {
public:
	enum TNorthOper {kNone=0, kCenter=1, kDirection=2, };
protected:
	TNorthOper m_nOperCode;

	// I/O
	TDbSymbNorthThumb *m_pDrawEnt;
public:
	TNorthThumbEdJig(TDbSymbNorthThumb *);
	virtual int DoIt(int *pKeyIndex=NULL);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual BOOL IsPosChanged(XPoint ptNew) const;
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
public:
	void SetOperCode(TNorthThumbEdJig::TNorthOper opCode) {
		m_nOperCode=opCode;
	}
};





// 对称轴
class TSymmetryEdJig : public TSymbEdJig {
protected:
	// I/O
	TDbSymbSymmetry *m_pDrawEnt;

public:
	TSymmetryEdJig(TDbSymbSymmetry *);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
};





// 剖面剖切
class TSectionEdJig : public TSymbEdJig {
public:
	enum TSectionOper {kNone=0, kSectPoint=1, kSectPointOther=2, kViewDirection=3};
protected:
	int GetRetCode(int nRetCode, int *kewyIdx=NULL) const;
protected:
	TSectionOper m_nOperCode;
	int m_iFlag2;
	//add by lgy 20120320	添加改变量控制那种方式jig剖面符号
	 int m_nMode;
	 CSectionDlg *m_pDlg;
	// I/O
	TDbSymbSection *m_pDrawEnt;
	TDbSymbSection m_drawEnt;

public:
	TSectionEdJig(TDbSymbSection *);
	int DoIt(int *pKeyIndex=NULL);
	//add by lgy 20120320 设置剖面符号绘制的方式
	void SetJigMode(int nMode);
	void SetJigDlg(CSectionDlg *pDlg);	//设置与jig交互的对话框
protected:
	virtual AcEdJig::DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
public:
	void SetOperCode(TSectionEdJig::TSectionOper opCode) {
		m_nOperCode=opCode;
	}
	int GetiFlag2();
};





//add by lgy 20120410	9.0新功能绘制云线
class TCloudLineJig : public TSymbEdJig
{
public: 
	TCloudLineJig(TDbSymbModi *pModi, XPoint ptFirst, double dMax, double dMin);
	~TCloudLineJig();

public:
    virtual int DoIt(int *pKeyIndex = NULL);
    virtual DragStatus GetPoint(XPoint &pt);

protected:
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

private:
	XPoint		m_ptFirst;
	double		m_dMax;
	double		m_dMin;

	XPoly2D		m_pline;

	TDbSymbModi	*m_pModi;
};

#endif