envi-code/SourceCode/Code2026/Dimension/AecDbSymbElevation.h

#pragma once
#include "AecDbSymbWithText.h"
#include "ObjInfoUnit.h"

#define SEF_DOWN		0x01	// 下标注
#define SEF_LEFT		0x02	// 左标注
#define SEF_BASELINE	0x04	// 有基线
#define SEF_LEADER		0x08	// 有引线
#define SEF_PREC2		0x10	// 2位精度
#define SEF_FILLED		0x20	// 填充
// sg add 090204
#define SEF_DOTE		0x40	// 室外标高圆点样式
#define SEF_STANDARD	0x80	// 规范样式

// 以下保存在 m_nFlag2 内，不要骂娘，也不知道是谁这么干的。无解。
#define SEF_PARENTHESES 0x01	// 传统方式是否增加括号
// sg add 090220
#define SEF_ATSIDE		0x02	// 文字齐线端
#define SEF_ARCHELEV	0x04	// 是否是建筑标高
// sg add 090301
#define SEF_UPDOWNTEXT	0x08	// 总图标高是否上下排列

// 以下保存在 m_nFlag3 内。
// sg add 120608
#define SEF_TRIANGLE	0x01	// 空心三角形标高符号
#define SEF_NEWELEV		0x02	// 新总图标高中的右上标注形式，只对三角形填充标高作用

// jsx add 160517
#define  SEF_CROSS		0x04	// 十字样式标高


class AecXDbText;
class AecXDbSymbElevation : public AecXDbSymbWithText
{
public:
	ACRX_DECLARE_MEMBERS(AecXDbSymbElevation);
private:
	const static Adesk::UInt8 g_nVersion;

protected:
	Adesk::UInt8 m_nFlag;	// 控制标记
	ADSGePoint3d m_ptLocation;
	TCString m_sText;		// 文字参数，多个的则分行

	double m_nTextBaseLen,	// 文字基线长度(图纸尺寸)
		m_nLeaderLen,		// 引线长度(图纸尺寸)
		m_nBaseLen;			// 基线长度(图纸尺寸)

	// TArch8
	double			m_dText2BaseRatio;	// 文字距基线系数，sg add 081111
	ADSGePoint3d			m_ptText;			// 文字夹点位置点，sg add 090204
	Adesk::UInt8	m_nFlag2;			// 文字与基线的相对位置标记
	TCString			m_sLowText;			// 预留以后在线下增加文字使用，sg add 090211
	ADSGePoint3d			m_ptLowText;

	// TArch9
	Adesk::UInt8	m_nFlag3;

public:
	AecXDbSymbElevation();
	~AecXDbSymbElevation();
	virtual BOOL IsValid() const;
	virtual void CopyPropertiesFrom(AcDbEntity *pSrcEntity, unsigned gMatchFlag);

	virtual Adesk::Boolean subCloneMeForDragging();
	//virtual Acad::ErrorStatus subGetClassID(CLSID* pClsid) const;
	virtual Acad::ErrorStatus dwgInFields(AcDbDwgFiler*);
	virtual Acad::ErrorStatus dwgOutFields(AcDbDwgFiler*) const;
	virtual Acad::ErrorStatus dxfInFields(AcDbDxfFiler*);
	virtual Acad::ErrorStatus dxfOutFields(AcDbDxfFiler*) const;

	virtual Acad::ErrorStatus  subTransformBy(const AcGeMatrix3d& xform);
	virtual Acad::ErrorStatus  subGetGripPoints(AcGePoint3dArray& gripPoints,
		AcDbIntArray& osnapModes, AcDbIntArray& geomIds) const;
	virtual Acad::ErrorStatus subGetGripPoints(AcDbGripDataPtrArray& grips,
		const double curViewUnitSize,
		const int gripSize,
		const AcGeVector3d& curViewDir,
		const int bitflags) const;
	virtual Acad::ErrorStatus  subGetStretchPoints(AcGePoint3dArray & stretchPoints) const;
	virtual  Acad::ErrorStatus subMoveGripPointsAt(const AcDbIntArray& indices,
		const AcGeVector3d& offset);
	virtual  Acad::ErrorStatus subMoveStretchPointsAt(const AcDbIntArray& indices,
		const AcGeVector3d& offset);

	// drived from TDbEntity
	virtual void GetTips(PtrList<ObjInfoUnit> &) const; // 取动态属性显示数据
	virtual Acad::ErrorStatus GetGripText(int i, CString &cs) const;
	virtual Acad::ErrorStatus Draw2d(AcGiDraw &dc) const;
	virtual int ConvertText(TConvertTextPtr ptr, void *pData = NULL);
	virtual SubText* HitTestText(ADSGePoint3d pt)const;
	virtual long GetSubTextNum()const { return 1; } // ok
	// sg add 090326，处理右键在位编辑错误
	virtual SubText* GetSubText(long iText)const;
	virtual void SetSubText(long i, CString sText) { SetText(sText); } // ok
	virtual const TCHAR *GetDefaultLayer() const;

	// sg add 090204
	BOOL GetText(Adesk::UInt32 cookies, AecXDbText &text, double &dPageWidth) const;
	virtual TextPosition  FindSubText(const TCHAR *sSubText, TextPosition &posStart,
		TextRange *pRange = NULL) const;
	virtual TextPosition  ReplaceSubText(const TextPosition &posRep,
		const TCHAR *sRepText, TextRange *pRange = NULL);

	//virtual Acad::ErrorStatus DownGradeSave(int nDrawMode, AcDbVoidPtrArray &entSet,
	//	BOOL *bErase); // sg add 090216，图形导出

	   // sg add 101116，支持统一标高
	virtual bool UnifyElevation(double dElevation = 0.0);

public: // Helper Method
	void GetVertexes(ADSGePoint3d ptArray[7]) const;
	double GetDefaultTextBaseLen(BOOL bAsPaperUnit = TRUE) const;

	// sg add 090318，将文字位置点，有WCS改为ECS，以下3个函数，用于转化
	AcGePoint2d GetEcsOriginPt() const;
	void GetEcsAxisVector(AcGeVector2d &xAxis, AcGeVector2d &yAxis) const;
	ADSGePoint3d GetWcsTextPt(BOOL bLowText = FALSE) const;

	// 从8.0的BETA2起，GetDefaultTextLocation、GetDefaultTextLocation2函数可不使用
	ADSGePoint3d GetDefaultTextLocation() const; // sg add 090204
	ADSGePoint3d GetDefaultTextLocation2() const; // sg add 090216

	BOOL IsDigitEle(const TCString &sText) const; // sg add 090204，判断是否是数字标注
	// sg add 090212，计算多行文字最小页宽
	double GetMinTextBaseLen(TCStringList &lstTexts, BOOL bAsPaperUnit) const;

	// ADSGePoint3d GetElev1DrawPt() const; // sg add 090216，获取各个多行文字的绘制点
	// ADSGePoint3d GetElev2DrawPt() const;
	// ADSGePoint3d GetFloorDrawPt() const;
	// sg modify 110125，获取各个多行文字的绘制点，增加参数传递，减少循环次数
	ADSGePoint3d GetElev1DrawPt(TCStringList &lstElevs1, TCStringList &lstElevs2) const;
	ADSGePoint3d GetElev2DrawPt(const ADSGePoint3d &pt1, const double &dPage) const;
	ADSGePoint3d GetFloorDrawPt(const ADSGePoint3d &pt1, TCStringList &lstElevs1, TCStringList &lstElevs2,
		TCStringList &lstFloors, BOOL bHasPt1 = TRUE) const;

	// 获取基线下方文字，在X方向的宽度（相当于页宽）
	double GetLowTextXExtents(BOOL bAsPaperUnit) const;
	CString FormatLowText() const; // sg add 090223，对基线下方文字进行格式化

	// Properties
	const TCHAR *GetText() const;
	// add by whl on 040922
//	void GetTexts(TCStringList &lstTexts)const; // sg modify 090211
	void GetTexts(TCStringList &lstElevs1, TCStringList &lstElevs2,
		TCStringList &lstFloors)const;
	bool GetElev1(double&res)const; // 取相对高程
	bool GetElev2(double&res)const; // 取黄海高程
	CString GetNoteString()const;   // 括号中内容
	void AddElev(double elev);      // 高程变化

	Adesk::UInt8 GetFlag() { return m_nFlag; }
	Adesk::UInt8 GetFlag2() { return m_nFlag2; }
	Adesk::UInt8 GetFlag3() { return m_nFlag3; }

public: // Set、Get
	ADSGePoint3d GetLocation() const;
	double GetTextBaseLen(BOOL bAsPaperUnit = TRUE) const;
	double GetLeaderLen(BOOL bAsPaperUnit = TRUE) const;
	double GetBaseLen(BOOL bAsPaperUnit = TRUE) const;
	BOOL HasBaseLine() const;
	BOOL HasLeader() const;
	BOOL IsPrec2() const;
	BOOL IsFilled() const {
		return ((m_nFlag & SEF_FILLED) != 0);
	}

	void SetText(const TCHAR *pszText);
	void SetLocation(ADSGePoint3d pt);
	void SetTextBaseLen(double val, BOOL bAsPaperUnit = TRUE);
	void SetBaseLen(double val, BOOL bAsPaperUnit = TRUE);
	void SetLeaderLen(double val, BOOL bAsPaperUnit = TRUE);
	void SetBaseLine(BOOL bTrue);
	void SetLeader(BOOL bTrue);
	void SetPrec2(BOOL bTrue);
	void SetFilled(BOOL bTrue) {
		assertWriteEnabled();
		if (bTrue)
			m_nFlag |= SEF_FILLED;
		else
			m_nFlag &= ~SEF_FILLED;
	}

	// sg add 081111，bRealDist用来控制，返回“实际距离”（自动乘字高）或“系数”
	double GetText2BaseRatio(BOOL bAsPaperUnit = TRUE, BOOL bRealDist = TRUE) const;
	void SetText2BaseRatio(double dVal, BOOL bAsPaperUnit = TRUE);

	// sg add 090204
	ADSGePoint3d GetTextPoint(BOOL bEcsPoint = FALSE) const;
	BOOL IsRightText() const;
	BOOL IsDote() const;
	BOOL IsStandard() const;

	void SetTextPoint(ADSGePoint3d pt);
	void SetDote(BOOL bTrue);
	void SetStandard(BOOL bTrue);

	void SetLowText(const TCHAR *pszText); // sg add 090211
	void SetLowTextPt(ADSGePoint3d pt);
	const TCHAR* GetLowText() const;
	ADSGePoint3d GetLowTextPt(BOOL bEcsPoint = FALSE) const;

	//jsx add 160517
	BOOL IsCross() const;
	void SetCross(BOOL bTrue);

	BOOL IsParentheses() const; // sg add 090212，传统样式时，楼层信息部分，是否增加括号
	void SetParentheses(BOOL bTrue);
	BOOL IsAtLineSide() const; // sg add 090220，设置文字是否齐线端
	void SetAtLineSide(BOOL bTrue);
	BOOL IsArchElev() const; // sg add 090223，设置标高类型，普通标高、总图标高
	void SetArchElev(BOOL bTrue);

	BOOL IsUpDownTextElev() const; // sg add 090301，总图标高是否上下排列
	void SetUpDownTextElev(BOOL bTrue);

	BOOL IsFloorsOnRightSide() const; // sg add 110125，多层标高符号中的楼层是否在标高值左侧
	void SetFloorsOnRightSide(BOOL bTrue);

	BOOL IsNewSitePlanElev() const; // sg add 120608，9.0新增加的总图右上侧标注的三角形填充标高
	void SetNewSitePlanElev(BOOL bTrue);

	BOOL IsHollowTriangle() const; // sg add 120608，9.0新增加的空心三角形总图标高
	void SetHollowTriangle(BOOL bTrue);

	BOOL HasKnowFloorsLoc() const; // sg add 110125，判断是否是需要知道楼层注释在左侧或右侧的特殊标高

private:
	// sg add 091116，打开T7对象后，对标注内容进行检查，如果是类似"9(%%P0.00)"，则将文字拆分成两部分
	void CheckAndModifyT7String();

	// sg add 120608，将T9格式标高内容与原来的标高格式内容相互转化
	void Change2T9ElevText();
	CString Change2OldElevText() const;
};